Jump to content
SAU Community

My 34 has an impul boot lid and it has massive gaps

SeanR32GtSt

By SeanR32GtSt,
in Exterior & Interior Styling

 Share

Recommended Posts

GTSBoy Grand Master

GTSBoy

Posted
Posted
7 hours ago, SeanR32GtSt said:

Vin search showed no accident before purchase but who knows eh

A VIN search on my car won't show any accidents but it's been in a couple, including one that would leave the back of the car looking like that if it hadn't been repaired correctly.

Link to comment
Share on other sites
  • 4 weeks later...
SeanR32GtSt Community Regular

SeanR32GtSt

Posted
  • Author
Posted
1 minute ago, Anawilliam850 said:

If your car has a large gap between the trunk lid and the body of the vehicle, it may be caused by a misaligned trunk lid or a problem with the trunk lid's hinges. It's also possible that the trunk lid itself is damaged or bent. It's best to have a mechanic take a look at the vehicle to diagnose the problem and recommend a solution.

Thank you for a proper response. I had the vehicle inspected before purchase and didn’t note any structural damage. However it’s more likely the trunk is misaligned. I’m having it repainted this summer so I’ll have my painter address that issue. 

Link to comment
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted
4 hours ago, SeanR32GtSt said:

Thank you for a proper response. I had the vehicle inspected before purchase and didn’t note any structural damage. However it’s more likely the trunk is misaligned. I’m having it repainted this summer so I’ll have my painter address that issue. 

Oh. My. God.

You just thanked a GPT3 chatbot.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DraftySquash
      Question about R34 GTT A/T Solenoids

      By DraftySquash · Posted

      So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Kinkstaah
      R34 GTT RB rough idle problem with weird RPM gauge fluctuations

      By Kinkstaah · Posted

      Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • PranK
      R’s Meet - Fuji speedway 2024

      By PranK · Posted

      So awesome! I love the RB with the exhaust on display.
    • Just_a_datsun
      RB26 R32GTR Block. Z32 5spd Turbo Gearbox.

      By Just_a_datsun · Posted

      NO HITS PRICE DROP   ENGINE - $8.5k ONO TRANSMISSION - $1.8k ONO  
    • GTSBoy
      ER34 RB25DE Auto - Would a flush ever fix an "A/T" light?

      By GTSBoy · Posted

      If it has had a code in the recent past, the code should still be there waiting to be read.
×
×
  • Create New...