Jump to content
SAU Community

Recommended Posts

Hi all, wondering if anyone can help. I am looking at buying a skyline. I’m a newbie to skylines completely. It’s highly modified running 600bhp. Spec is brilliant can post if need be. My main question is. How many miles will it last? I won’t be thrashing it. I’ll be servicing regularly. Will I do a 100k miles? What will need replacing ? What can go majorly wrong? Sorry for all the questions. Cheers guys. 

Link to comment
https://www.sau.com.au/forums/topic/484363-rb25det-highly-modified/
Share on other sites

Well, the good news is that 600hp is more like mildly modified these days, so if it has been done properly it should last a while.

Details of what has been changed (and what hasn't, and how many klm) might help provide specific guidance

  • Thanks 1

Reason for sale is just want to free some funds .. don’t need to sell it so keep your shit offers x

Spec is as follows..

R33 GTST 850BHP 

Shell on 85000 KM 
Engine on about 2500Miles

DRIVETRAIN:
Fully built Spec 2 RB25
Cylinder head FULLY ported 20hours+ labour
BC bronze valve guides
Brand new RB26 Crank
Manley Turbo Tuff Rods
RB26 CP 87mm Pistons 
ARP head and main studs
Tomei head gasket
Tomei pon Cams
Supertech valve spring kit
Tomei timing belt
Ross 36 -2 trigger kit 
Tomei Billet oil pump
6 boost manifold 
G30-900 turbo
Turbo smart 50mm wastegate
Full 3.5” exhaust
Genuine greddy inlet manifold 
Bosch 82mm DBW 
ID1050x injectors
Bosch knock sensors
Super forma head drain kit
Baffled sump
Superforma oil housing take of plate
GREX filter relocation
Mocal oil cooler
Koyo 52mm radiator
Orc 659D twin plate clutch
350z gearbox conversion with serial 9 shifter
Vibratechnic engine mounts
Vibratechnic gearbox mount
ARP bolts throughout 

FUEL SYSTEM:
Stock tank with walbro 255 lift pump
Nuke 3L swirl pot with walbro 525primary / 450secondary
All fuel lines are PTFE methanol safe 
Bosch motorsport fuel filter
Radium fuel rail
ID1050x injectors
Tomei type L FPR
Continental ethanol content sensor

SUSPENSION AND BRAKES:
Full super pro poly bushed
All drift works adjustable arms
All arms have been powder coated
Reinforced rear subframe with white line bushes
K sport 8 pot front brakes
K sport 4 pot rear brakes
GKTECH hidden hydro utilising factory handbrake
GKTECH master cylinder stopper
SHIT BRONZE ROTAS

SHELL:
One of the cleanest completely untouched R33 shells to exist 
0 welding repairs and none needed
Engine bay shit blasted and painted in midnight purple with purple flake
Car is painted in gunmetal with subtle sparkle
Knight racer carbon bonnet 
GTR fibre glass front bumper
Spec M side skirts
GTR Rear spats

Syvecs S7+ Tuned by MB AUTOMOTIVE
FULL FLEX FUEL TUNED FOR 35% METHANOL 
Full custom wiring loom 
Haltech IC7 dash

Makes a genuine 850 BHP 35% on methanol
710 BHP on petrol 
Figures are from my own dyno at Motion AutoWorks, which has been reliable proven time and time again

Think I’ve listed everything.. probs missed loads as very high spec car

That is the spec. @Ben C34 is that  serious reply , because that is what I’m worried about I want to enjoy it. I don’t want it to be in the garage every 5 mins. I will obviously drive it properly but Am not going to be hitting the limter every time I drive it 

14 minutes ago, Benrobinson said:

That is the spec. @Ben C34 is that  serious reply , because that is what I’m worried about I want to enjoy it. I don’t want it to be in the garage every 5 mins. I will obviously drive it properly but Am not going to be hitting the limter every time I drive it 

I would say it's a serious reply. 

Assuming the car is built well, how long till you experience breakages is 100% down to how the car is driven.

If you use it on the street and drive around like a cop is following you, the car will last a looooong time. 

If you are driving it in anger or using it on the track.... you might break something on your first event. 

Consider this, proper track cars at that power level (850HP), that are raced over the year, might do what 8 events in total? If nothing broke, they would still have the engine pulled down and inspected each year. 

So yeah, 850HP from a 2.5L engine, the engine is a consumable item. If you use it, you consume it. It's up to you how long it lasts. And also, if the car is driven hard, expect to be regularly replacing that gearbox and the driveshafts if they are stock.

  • Like 1
1 hour ago, Benrobinson said:

Reason for sale is just want to free some funds .. don’t need to sell it so keep your shit offers x

Whats this about? You selling it or just bought it?

Looks like it has a lot of good parts but that doesn't mean shit if the builder was a monkey. How do you know its been built well?

Buying a modified (mild or more) car will always be fraught with danger, you have no idea the competency of the mechanic (or maybe you do?).

600hp is a lot for the street, if it is to be a street car and driven as such then you're more likely to be fine over the long run.

  • Like 1

I'm also assuming this is heaps of cash. If you arent planning to actually thrash it, seriously why buy it?

 

It's hard to not worry about stuff breaking with modified cars. Stuff breaks. If you don't want stuff to break you leave them alone.

38 minutes ago, robbo_rb180 said:

Your in USA? 
guessing thats the youtube guy that builds and flips cars.

600hp USA is around 200hp in Australian dyno figures 😂

But Spec 2 build bro $$$

  • Haha 2

As with anything there is no replacement for going and actually seeing what the car actually is instead of what some seller dreamed up. Lots of UK cars that are supposedly immaculate but all the attention is on the exterior paint and nothing for the underbody. These cars are crazy expensive to fix between Nissan doubling the price of R chassis parts every year and the rarity of competent mechanics for these cars. They aren't that complicated but most mechanics seemingly have none of the equipment or experience to fix OBD1 cars anymore.

@Ben C34 @robbo_rb180 @BK @GTSBoy @PranK @Murray_Calavera  morning all I am in the UK. Thanks for all your replies. 
sorry for posting on your forum but the UK ones are shite.  
The person who built the engine is one of the best in the uk to my knowledge. I am not going to be using the 850hp on methanol. I’ll be using a safe 500/600hp. Won’t be thrashing it. Why because I want to look after it. Why am I buying it? Because who doesn’t want a skyline ?! The whole car is immaculate. Underneath paintwork everything. Can I add pictures here ? 
 

the main reason for the thread was. I wanted to know weather I’m going to spend every weekend in the garage or can I actually enjoy this car? will this car do 100k miles. If not what will need replacing. I not a drifter. Nor am I a crazy Driver. 
 

again thanks guys all responses are helpful negative or positive. Cheers. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...