Jump to content
SAU Community

Recommended Posts

3 hours ago, Duncan said:

Good of them to confirm. 

I've never had to do it so don't know the procedure, but you can also measure the height to ensure you have the right carrier and bearing size

That was my next step. I asked if they had a particular height I needed to have In order to instal it. The one I have is 18 mm and the one that was fitted on the car before is 15mm. I had to replace the carrier group after I broke the old one (pressed on the bearing and snapped on the ear where the fork sits -oops). 

Edited by Jjtxaz24
Measured TOB Carrier
  • 2 weeks later...

I emailed the company and waiting for a response, figured I'd see if you guys got any idea. 

Which direction does the clutch disk go? It's not labeled nor does it indicate a specific way. 

A:20230412_122128.thumb.jpg.626ff4b940817bebf44eecd9523f289c.jpg

B:20230412_122109.thumb.jpg.43646a8b218e0f3702d617473e32f27a.jpg

I had it in the car as "A". 

Here's 2 other pics of them side by side.

20230412_125754.thumb.jpg.b1ad02ba780e9228118c33f1cac69fb8.jpg

20230412_125807.thumb.jpg.6d5a935e71198c49f35e52c73c09a2f0.jpg

As always, I appreciate your help. 

  • 1 month later...

Alright well I had some free time and it's all buttoned up. Still not working. 

Mantic warrantied out the clutch and I threw that in there. Dropped it on the ground and didn't go anywhere.

I made sure to bleed it right. Pulled up the FSM and found I need to bleed the master, junction box and slave. Done. 

Screenshot_20230528_214814_Drive.thumb.jpg.526ff0f058a91df410ea558ab842b8db.jpg

I guess I just need a whole different clutch set up. I don't know what to do at this point. 😕

This sounds like an incorrect release bearing length/travel or clutch pedal adjustment issue to me. If your transmission is still on the car, remove your slave cylinder and by hand pushing your clutch fork, how much play is there before the release bearing touches the flywheel?

If your transmission is off, better yet; ask your clutch OEM for a clutch release bearing checking guide. I can supply you one from ACS that more than likely applies to any clutch if needed.

40 minutes ago, TurboTapin said:

This sounds like an incorrect release bearing length/travel or clutch pedal adjustment issue to me. If your transmission is still on the car, remove your slave cylinder and by hand pushing your clutch fork, how much play is there before the release bearing touches the flywheel?

If your transmission is off, better yet; ask your clutch OEM for a clutch release bearing checking guide. I can supply you one from ACS that more than likely applies to any clutch if needed.

I do think the release bearing is to tall (now that I installed it and ran into the same issue) for this clutch set up and that's why it's running into issues. I reached out to mantic and they didn't have any specifics to tell me as to what release bearing to use, all they said was its OEM compatible. Original that was in the car was 15mm I broke it and ordered a new one and that one was 18mm. That's what's in the car. Didn't work. 

I ended up just ordering a whole new kit that comes with everything. I looked at this when I first started to look for clutches and I should of just ordered it when I saw it. I would have saved myself the time and money from the get-go. 

Screenshot_20230529_203050_Brave.thumb.jpg.29c2109204b0220987f9244604a2d591.jpg

Silver lining to this is I have the removal and install of this heavy ass transmission and that top starter bolt down so I can get it done in an evening instead of over a few days on the weekend. Lol. 

  • Like 2

Well there's a saying round here that goes "third times the charm." Removed and installed the trans on Friday (had a day off and kids were at day care) in about 7 hrs with some breaks for lunch and sanity checks. 

Bled the clutch today and topped off the tranafer case (still gotta figure out how to get the 4WD light off on the dash - I vacuum Bled the actuator, but it's still on) but she drives perfectly. Clutch feels good and it's nice to have her out of the garage in time for some summer cruising... 

Maintenance never ends and still got little things to do but for now it's good. 

Learned some tips to get that starter bolt on/off and the top bell housing bolts. 

Thank you all for all your help!!

20230604_182725.thumb.jpg.e29480506e67c58d5bbf5a21bcb16924.jpg

  • Like 2

Great to hear that is back together and being enjoyed.

So is the difference that you removed the original clutch kit and installed a new one? Looks like the new kit had a different height with the flywheel/pressure plate stack and came with a different throw out bearing?

21 hours ago, Duncan said:

Great to hear that is back together and being enjoyed.

So is the difference that you removed the original clutch kit and installed a new one? Looks like the new kit had a different height with the flywheel/pressure plate stack and came with a different throw out bearing?

I'm excited to be driving it again and my boys are too. 

 

Yeah, I removed the mantic and used the xclutch twin. 

I honestly think the throw out bearing sleeve being 18mm is what was causing the problem. The original one I snapped is 15mm, when I ordered the new one that was "OEM" I measured it and it came to 18mm. I didn't measure the mantic kit to the xclutch. 

The one that came with the new clutch kit is 15mm. I reused my OE fork, and pivotball (just a new one) everything else is what was in the kit. 

  • Like 1
  • 1 year later...

I figure a year isn't that long these days for a thread bump. How do I undo ridiculously tight rear driveshaft bolts? I bought a 6 point box end wrench and a dedicated wrench extender, I've tried heat + penetrating oil. What's the next step if all of that fails? Do I use a dremel to try and cut open the nut?

On 8/15/2024 at 1:08 AM, GTSBoy said:

Yuh. Time for the hydraulic nut splitter. Or his poor Mexican cousin, el Grindo.

Turns out the solution was penetrating oil + time, but also a 6 point box end wrench with a 15 inch extension. I managed to also get my impact to fit without a u-joint which delivered enough torque to do the trick, but it required a regular chrome socket which is super dangerous and probably not recommended. U-joint took up way too more torque seemingly even at fairly straight angles.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
    • A 180SX has a much better look than a FD. The roofline is far superior being a fastback. It's popups look better. In a world where we all subconsciously add a little bit of low, and wheels of our preference, it's just more handsome than the FD is. The FD just looks 'bubbly' in comparison. It can come down to preference, sure. But "The FD is the BEST looking (on appearances alone) 90's JDM car without question?" Nah. Plenty of questions lol. I could think of 8 cars I think look fundamentally better, and probably a handful of ones that look about on par with a FD. (like say a SW20 MR2) I feel people like/overrate the FD because of it's mythicality/rarity, its rotary and it's unpredictable nature. It probably drives great, you can stuff a ton of tyre under there, has a unique sound, light as hell. I feel that people reading this thinking "YOU CANT RATE A 180 ABOVE A FD BECAUSE A 180 IS A CHEAP DRIFT BUCKET" prove the point about bias as to what the car represents, moreso than how it actually looks.. I feel the 80's boxy/squared off look is becoming better looking due to time, and 90's melted soap bar aesthetics have not aged well. (yet?) And this thread is purely about looks :p
×
×
  • Create New...