R32 GTR inner Seat harness mounting point

[Beaker_666]

Hi i was wondering if anyone can help me 

I am just swapping out the Standard seat and putting in an SR5 With Recaro Rails  with a TRS 4 point harness .. I know that the Rear Mounting points for the Seatbelt can be used for the over the shoulder straps and the right hand Bolt uses the Seatbelt pole... But the inner strap mounting point i came to use the bolt but it a Nut Fitting there .. 

 

any suggestions or pointers welcomed .. 

 

many thanks 

 

J

[Duncan]

you can get either an eye bolt if there is a nut/thread in the chassis, or an eye but if it is a stud. Then clip the harness onto the eye fitting

 

[Duncan]

also, I should add, a 4 point harness is way inferior to 5 or 6 point, because there is no "anti-submarining" strap. You really should go 5 or 6 point for every harness regardless of use.

[GTSBoy]

36 minutes ago, Beaker_666 said:

I know that the Rear Mounting points for the Seatbelt can be used for the over the shoulder straps

Yeah, but you shouldn't.

[GTSBoy]

As to the question of the inner rear seat attachment point - it's a stud in from the tunnel. A flat plate with a hole in it can be interposed between the seat rail and the tunnel. That plate then needs to have your harness eye on it in some fashion.

[Dose Pipe Sutututu]

I use these things 

https://www.schrothracing.com/item/bolt-in-end-fitting-kits/hardware-Harnesses

 

[Beaker_666]

Hey thank you for all the input have the 5th Strap just havent Welded the Eyelet to the floor Yet .. 

 

have now procured an M10 Eye Nut ..cheers for all the advice

 

Beaker