Jump to content
SAU Community

Recommended Posts

overpowered bullshit, there is no law regarding how powerful a l or p platers car can be. If you were lucky enough an L plater could drive around in marios GTR700 with 1500hp...mmmmmmm. There was talk of a new law coming in but how are they going to police it? no way. Maybe say no L plater can drive a v8 or maybe a turbocharged car, but then just build a mad per port 13b?

Link to comment
https://www.sau.com.au/forums/topic/48484-copsskylineswtf/#findComment-974900
Share on other sites

i have recently been driving my skyline r33 and was pulled over by the cops because i am a p-plater. they said that my car was over powered as i live in melbourne. does anyone know how i can overcome this problem to be able to keep on driving it?

get older, and one day if you're lucky, you'll reach 26 like me.

-rb25

Link to comment
https://www.sau.com.au/forums/topic/48484-copsskylineswtf/#findComment-975228
Share on other sites

rofl rb25.

I didn't realise there were any laws but in theory I guess you could

a. pretend its a non turbz.

b. pay engineer for a restrictor of some sort to limit the power and get it certified.

God knows how you'd get option b working - ask the RTA or whoever that is in your state.

Also look into getting a residential address in NSW and getting a NSW license.

This would only work if the law is that noone licensed in VIC etc... whereas if it's just a law in regards to license classes then .... *shrug*

I'm glad I'm not on my p's .... HAHAHAHAHAHAHA

... ok sorry i do feel ur pain...

Link to comment
https://www.sau.com.au/forums/topic/48484-copsskylineswtf/#findComment-975239
Share on other sites

the law works differently for v8s and turbos

for a v8 a p plater isnt allowed more tha 125rwkw per ton of vehicle.

for a turbo car it works in literage of the eninges capacity as the kw's can easily be adjusted by boost. u are allowed 2.5liter per ton of vehicle.

i was told this by a victorian tmu officer when he was defecting my car!

matty

Link to comment
https://www.sau.com.au/forums/topic/48484-copsskylineswtf/#findComment-975240
Share on other sites

in on my p's with a r33 gts-t aswell mate and i havnt had one bit of attention from the cops yet in melbourne. but i mean if i started to get hassled i was thinking of selling the car and moving to a heavily modded r32 or a wrx.

how would that make a difference? They're still more than the power/weight limit...

Link to comment
https://www.sau.com.au/forums/topic/48484-copsskylineswtf/#findComment-975454
Share on other sites

Well the new law in sydney , you cant drive past 10pm or a high powered vehicle if your a p plater.

i knew about the curfew their trying to get in sydney which hasn't been finalised yet, but haven't heard of power restrictions for p platers, has ne1 else heard of this, or did u make that up?

because owning a r32 gtr may become a problem if thats true, seeing i've got a year left on my greens

Link to comment
https://www.sau.com.au/forums/topic/48484-copsskylineswtf/#findComment-975710
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...