Jump to content
SAU Community

Calling People in VIC who assemble their own RB engines.

Seffdaddy

By Seffdaddy,
in Engines & Forced Induction

 Share

Recommended Posts

Seffdaddy Newbie

Seffdaddy

Posted
Posted

Looking to hear from the guys who are assembling their own RBs in Melbourne. 

Does anyone have a machinist they know and trust who could provide some level of advice and complete the machine work, then send me off to assemble it myself?

I should state:
- I understand that engine builders make their money by building engines themselves. Not expecting anything for free, in fact I'm keen to pay them.
- Given I will be assembling the engine, I accept all responsibility if in the event it was to fail (would happily put this in writing).

The idea behind this is to get good at building my own engines, enjoy the process and become self-sufficient. I have built an RB25 myself almost 10 years ago and I was a mechanic for several years, however I recognise I'm not an engine builder.
 

I've dropped off and picked this block up from two workshops already where they promise to do the work, nothing happens for 3 months and I get over it. I just want out of this cycle and to drive/enjoy my car.

any help much appreciated 🙏🏼

  • Like 1
Shoota_77 Veteran

Shoota_77

Posted
Posted

It was many years ago I got my engine machining done but I had a very good experience with Headspec in Clayton.  Frank was the guy running the show back then and I think it was Michael who was working for him (may be in charge now??).  They were great to deal with and everything was done as per my requests and expectations.

Nothing wrong with wanting to do it yourself and as you say, it's all on you if it turns to shit!

Good luck!!

Kinkstaah Grand Master

Kinkstaah

Posted
Posted

Frank and Michael are still around, and are still great. However, like most people who are still around and still great, they're very busy. So you may have a 3 month wait purely because of the backlog of things they already have on the go.

I always say a blown up RB is a 1 year process :D. But to be fair, my experience with Headspec was quite a lot of waiting until they got to my job, then when they did - it was completed in a couple of weeks. So I suppose there's plenty of work for competent engine builders out there.

Seffdaddy Newbie

Seffdaddy

Posted
  • Author
Posted

I have met Frank and Michael from Headspec. They are both lovely guys, gave me plenty of time and were always happy to chat and answer questions when I saw them in person. They have done some fab work for me previously. Unfortunately, they were the second workshop I left the block with. Potentially they're just too busy. One of the engines he was working on was being built over a 12 month period (also an RB). The block sat there for three months just to have them assess the block and quote a build (never happened). I actually felt quite comfortable with them and thought they would do a great job. I'm just not in a position to wait 12 months or someone to build this engine :(

Shoota_77 Veteran

Shoota_77

Posted
Posted
1 hour ago, Seffdaddy said:

I have met Frank and Michael from Headspec. They are both lovely guys, gave me plenty of time and were always happy to chat and answer questions when I saw them in person. They have done some fab work for me previously. Unfortunately, they were the second workshop I left the block with. Potentially they're just too busy. One of the engines he was working on was being built over a 12 month period (also an RB). The block sat there for three months just to have them assess the block and quote a build (never happened). I actually felt quite comfortable with them and thought they would do a great job. I'm just not in a position to wait 12 months or someone to build this engine :(

Righto, bummer!  That makes it tough.  One thing Covid has taught us all, you want something bad enough, you gotta wait!

Could be worth taking it out of town?  Somewhere regional like Bendigo or Ballarat as they MAY be slightly less backlogged?  No one here in Shepp I would necessarily recommend unfortunately....

I hope you get it sorted out.  

  • 1 month later...
funkymonkey Grand Master

funkymonkey

Posted
Posted

I reckon if you were to find a retired engine machinist who can mentor you, you’d be able to fill in the gaps with your own skills.

maybe have some conversations with the guys who are running the shops now about who they did their apprenticeships with?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...