Jump to content
SAU Community

Recommended Posts

Which turbo's are you guys running on your sr20det's? 

Im looking at the:

-GARRETT GT2871R (0,64AR) - $1350
-GARRETT GT2560R - $1050
-GARRETT GBC22-350 - $850

 

Im curious about the GBC22-350, anyone tried it? 

I currently have a built sr20det (top (cams, springs, solid lifters etc) and bottom(rods, pistions, coated bearings, headgasket and main/head studs)) but dont wanna run any crazy numbers, only safe numbers to get the car running again.
I also dont wanna break the gearbox since i will be running the standard gearbox (5speed).
 

IMG_4128.jpeg

Get a GTX2860R Gen 2, it will do about 250~260kW and come all close to the side of 3000rpm on E85.

Here's a post I wrote about it: https://www.instagram.com/p/Crr_8gOyC3e/ 

3 hours ago, Dose Pipe Sutututu said:

Get a GTX2860R Gen 2, it will do about 250~260kW and come all close to the side of 3000rpm on E85.

Here's a post I wrote about it: https://www.instagram.com/p/Crr_8gOyC3e/ 

Looks great! Sounds great aswell.

 

maybe the gt2871 is the way to go then.

the GTX2860R is a bit pricey 

4 hours ago, Dose Pipe Sutututu said:

GT2871 is so old, it's not 2003 anymore.

True. But does it matter if its a good turbo? 

gbc220-350 is a newer model, but dont know really mich about them. Tried to catch someone who runs it on a sr20

2 hours ago, timmy94 said:

True. But does it matter if its a good turbo? 

gbc220-350 is a newer model, but dont know really mich about them. Tried to catch someone who runs it on a sr20

Like I said earlier, it's smaller than stock. You can just look at the numbers and compressor map to know this. Technically the turbine will flow more due to higher trim but the compressor flows less air at the same pressure ratios.

Edited by joshuaho96
6 hours ago, timmy94 said:

True. But does it matter if its a good turbo? 

Subjective, I think it's a terrible turbo when compared to today's modern offerings.

Only thing "good" about it, is that it doses very well. You get a nice suuuuuututututut lol

  • Like 2
  • Haha 1

I am now running a Aeroflow 5047 .64 rear (gtx gen2 2867 specs)

Previously ran a garret gtx gen2 2867 .82 rear

The .64 is the way to go as a lot more responsive.

I also run a stock 5 speed but its struggling and eating syncro's.
Car makes 220-270kw pending boost level.
 

Edited by robbo_rb180
  • Like 1
22 minutes ago, timmy94 said:

ok then Got offered 

 

GTX2860 or GTX2867.

can get a good deal on the GTX2860R.

shall i go for that then

Gtx2867 

If decide to go for more power will be ready to go for around 270-280kw and be super responsive. 

1 hour ago, timmy94 said:

Whats the minimum power you think you can run on that without promblems like surge etc

Surge from what? Fuel?

1 hour ago, timmy94 said:

The GTx2867 Will probably be alot more expensive. 

If money is an issue look at other brands like mamba, pulsar, Aeroflow

Edited by robbo_rb180
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Might be tricky matching the seat trim material  If your got the funds you "may" want to get the rear re-trimed as well to match the front
    • How much is it to re-uploster?  Well that's a "how longs a piece of string?" question !  And I answer thusly: "twice half its length! " . . . . . .  Seriously you'll have to chase multiple quotes for that one from different uphlostrerereres !  Ask around, in your area and on the forums, chase reviews and most of all see the finished product in person cause photoshop is a wonderful thing !
    • Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
    • Oh and how is the rattle when foot is on the clutch ?
×
×
  • Create New...