Jump to content
SAU Community

Recommended Posts

Hi all,

I just purchased a '98 Stagea Autech 260RS. Based on my research, it's #412 of 1784 across both series. It has 142k km and is mostly stock, save some GT-R R34 rims and a Tomei(?) front grill. I'm based in the States, so this car was never sold here in any form. We didn't get the GT-R here until the R35, so the drivetrain is an unicorn (ironically). I'll be picking up the car in a couple weeks and driving it cross country to its new home. For now, I'm scouring the internet and educating myself on the care and feeding of these beasts. So far, I've determined that I can't just look up parts anywhere in the US, so starting to amass a list of cross-referenced parts. Anyway, I'm excited that there's an active forum for these cars and their sisters. I plan on gleaning all sorts of information from you.

Hi. I'm Kip. I've bought a car that doesn't exist where I live. I'm a fool.

-Kip

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/485025-fool-in-the-states/
Share on other sites

5 hours ago, Kip said:

Hi all,

I just purchased a '98 Stagea Autech 260RS. Based on my research, it's #412 of 1784 across both series. It has 142k km and is mostly stock, save some GT-R R34 rims and a Tomei(?) front grill. I'm based in the States, so this car was never sold here in any form. We didn't get the GT-R here until the R35, so the drivetrain is an unicorn (ironically). I'll be picking up the car in a couple weeks and driving it cross country to its new home. For now, I'm scouring the internet and educating myself on the care and feeding of these beasts. So far, I've determined that I can't just look up parts anywhere in the US, so starting to amass a list of cross-referenced parts. Anyway, I'm excited that there's an active forum for these cars and their sisters. I plan on gleaning all sorts of information from you.

Hi. I'm Kip. I've bought a car that doesn't exist where I live. I'm a fool.

-Kip

It's not that hard. Many parts are sold direct through Nissan USA dealers now, just look up the part numbers through the parts catalog. The 260RS is entirely R33 GTR as far as drivetrain goes.

Welcome Kip.

You'll be fine. I have a car (well, "truck") that not only does not exist where I live, but I had to have  converted from LHD to RHD as well.

Both drivetrain and engine are generally R33 GTR, but you can get info here on specific differences

  • Thanks 1
On 10/26/2023 at 4:44 PM, soviet_merlin said:

:wave:

From one fool to another, I'm sure you'll be fine. Do you have any photos of the car?

Here are a couple of the "glamor shots" from the dealer. It's pretty much stock (as mentioned above), but does have a set of meister coilovers and a modified exhaust. The interior is untouched which is nice. Tires are on order to add a little more sidewall and I'll adjust the coilovers to put the wheel wells just above the tire instead of down on the rim.

Engine 1.jpg

Side View 1.jpg

Three Quarter View 1.jpg

  • Like 4
On 10/26/2023 at 3:53 PM, joshuaho96 said:

It's not that hard. Many parts are sold direct through Nissan USA dealers now, just look up the part numbers through the parts catalog. The 260RS is entirely R33 GTR as far as drivetrain goes.

I didn't know Nissan USA would help me out. Very cool. That's half the battle (the first being tracking to the right part numbers).

Yeah. Reading a lot about the R33, since mine is essentially the wagon/estate/combi/avant model of it. I'm excited to have one of the ultimate sleepers.

  • 4 weeks later...
18 hours ago, soviet_merlin said:

Nice one, looks very clean! I always much prefer the boxy more aggressive look of the S1 over the S2.

Thanks. Just picked it up last week. Drove it 32 hours across the country to its new home and then some more local, holiday travel. Over 4,000 kms in all. The car can really eat up the miles.

And the petrol! It seems the car is more modified than I realized. I think it has an old school tune on it that is dumping too much fuel into the mix, based on the soot collecting on my rear bumper cover and the 13l/100km consumption I'm seeing. Regardless, it's an interesting car. I'm enjoying getting to know it. I'll get it off the ground this week and go on a fact finding mission. See if I can get a better understanding of the mods.

  • Like 1

Oh wow, that's some serious distance! That's an easy half a year worth of driving for many. I'm glad to hear it made it okay.

I wonder if the soot could also be from the exhaust setup. There's a highflow catalyst on mine that does pretty much nothing and smells terrible. I have been blaming the gunk on the bumper on that. Not sure though.

4 hours ago, soviet_merlin said:

Oh wow, that's some serious distance! That's an easy half a year worth of driving for many. I'm glad to hear it made it okay.

I wonder if the soot could also be from the exhaust setup. There's a highflow catalyst on mine that does pretty much nothing and smells terrible. I have been blaming the gunk on the bumper on that. Not sure though.

It drove beautifully. It really likes to just cruise around 130-140 kph. The exhaust quiets down. It's off boost. It just eats up the kms. It's almost zen like. 😉

You're right. The exhaust has something to do with it. I believe it's some sort of HKS exhaust, at least from the cat back. It has an ~10cm tailpipe that has both limited clearance of the bumper cover and points upwards a little. It's a cool visual that's a total 90s throwback for me, but it's creating some of the discoloration.

2 hours ago, Watermouse said:

Would a modern aftermarket ecu change that somewhat?

If you ran a wideband and tuned for a lean cruise you could save some. But it's just not an "efficient" engine design. Manufacturers have put a metric shit tone of work into reducing fuel consumption in the 35 years since that engine was born. Port design, chamber design, high compression, valve timing control, injector placement (and quality!), low tension piston rings, thin oils, smaller bearing journals, low drag engine ancillaries, etc etc. None of these modern things have you, hmmm?

2 hours ago, Watermouse said:

Would a modern aftermarket ecu change that somewhat?

It will help a little as others have said but don't expect miracles. And most tuners are not remotely interested in tuning fuel economy so expect to have to learn and do it yourself. 

Welcome! You've effectively got an R33 GTR wagon, so most of those parts can come from an R33, which most Nissan spares can order for you in the US these days. Body panels will be hard, but the US has some of the best body work and trim shops if reality TV is anything to go by :D

Sounds like you might have a remapped ECU, pop the carpet out under the passenger side and see if there's any tuning shop labels on the ECU, that's usually the easiest way to tell, or you might have to open up the ECU to see if there's any EEPROMs changed out etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know this one’s the BB one. My tuner did make mention about the actuator. I am curious about the VCT as well
    • Might also needs a stronger actuator with the right preloading. With older 2019 built bush G3 units, BB upgrade or 21U housing down size makes a pretty decent gain in response as well. 
    • Hey lads  so im finally putting together my rb30 forged bottom end and ran into an issue. I measured my main bearing clearance with arp main studs torqued to 60 ft-lbs using ACL H series STD size bearings and standard, un-ground crank shaft journals and got an oil clearance reading of about 1.3 thou measuring straight up and down and about 2.8 thou measuring at a 45 degree angle (just above and below the parting line). My machine shop said they measured the main tunnel and it was all within spec (they didnt say the actual measurement) and to go with a standard size bearing, which i have done and the clearance is too tight, I'm guessing because of the extra clamping force from the arp studs distorting the main tunnel. I was wanting to run about 2.5 thou main bearing clearance.  My questions are: 1. could i just use the HX extra 1 thou clearance ACL bearings? that would fix my straight up and down clearance making it about 2.3 thou, but then would the side to side clearance be too big at around 3.8 thou? 2. what actually is the recommended main bearing clearance for measuring near the parting line / side to side. i know its supposed to be bigger as the bearing has some eccentricity built into it but how much more clearance should there be compared to the straight up and down measurement? at the moment there is about 1.5thou difference, is that acceptable or should it be less? 3. If i took the engine block + girdle back to the machine shop and got them to line bore the main tunnel (like i told them to do the first time, but they said it didnt need it) what bearing size would i buy? the STD size bearing shells already slide in fairly easily with no real resistance, some even falling out if i tip the girdle up-side-down. If im taking material out of the main tunnel would i need a bearing with extra material on the back side to make up for it? this is probably confusing af to read so if something doesn't make sense let me know and ill try explaining in a different way. My machine shop doesn't come back from christmas break until mid January, hence why i'm asking these questions here. TIA for any help or info 
    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
    • Well, do ya, punk? Seriously though, let's fu<king go! The colour and kit looks amazing on the car. Do you have any shots from the rear? I don't quite follow how the model came around. You bought the white kit and he modified it to match your car? Looks nuts either way!
×
×
  • Create New...