S13 rear subframe in R32 GTR

[bakemono]

I want to swap out the subframe bushings on my r32 gtr (and while i'm at it, sandblast/powdercoat the subframe).  I'd rather do this on the side to minimize downtime to the car.  I can grab an s13 rear subframe locally relatively cheap and want to go this route if possible, as i'd also like to take the opportunity to do a hicas delete.  Here's my understanding from reading threads on here and elsewhere.  Most of what i found was for the GTST so its difficult to find gtr specific info.

 

1) S13 rear subframe will bolt right up to the r32 GTR

2) R32 GTR rear diff has different mounts, but will bolt up if i use an S13 diff cover) 

3) In place of the HICAS lock bar, i can bolt up S13 toe arms?

 

Are any of these assumptions off base?  Anything else i'm missing?

 

 

Edited November 24, 2023 by bakemono

[GTSBoy]

Dampers. GTR fork <> S13 eye.

Better to just buy a HICAS delete kit (that's a delete kit, not a lock bar) these days, rather than fit a non-HICAS subframe. Then you won't have to worry about the other changes.