Jump to content
SAU Community

Recommended Posts

Do you know where to put your hands on that oil report. I recalled where i read the Mobil 1 thing, it was an old Fast 4s and it was the Mobil 0-20W...and an NA Integra. Is it possible we are talkig about the same review? I never used the 0-20W, i think the one i use is 10-50w

Fair call on the black sludge thing though, but i always attributed that to the fact that i had 99% always done a track day per 5,000kms ?!?!?

And never noticed the oil pressure problem...but ive heard enough that i may start to use the Castrol...

Anyone have any thoughts on OWS?

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

The reason Mobil 1 is black when it comes out of your engine is that is has been cleaning carbon and blow-by buildup, like it is supposed to. I work for Mercedes Benz, who use mobil one in all their engines (including the 370kw twin turbo V12) and they never have a problem with their engines at all.

On the same note, if you have an older engine which has been running for 150,000 kms or more, and is used to running with the carbon buildup, do NOT run mobil one. It will clean the engine down, like it is supposed to, but then the motor will blow smoke and use oil because the clearances are too large in the engine now, courtesy of the carbon being cleaned away.

I have seen engines requiring rebuilds because of this (hyundai excel, and toyota corolla).

Mobil one is a good oil, but it needs to be used for the lifetime of the engine for it to work properly.

I will not be running it in my GTR when it lands for these reasons, but if i rebuild the engine, then i will run mobil 1 after the running in period.

Just my 2 cents :D

The reason Mobil 1 is black when it comes out of your engine is that is has been cleaning carbon and blow-by buildup, like it is supposed to. I work for Mercedes Benz, who use mobil one in all their engines (including the 370kw twin turbo V12) and they never have a problem with their engines at all.  

On the same note, if you have an older engine which has been running for 150,000 kms or more, and is used to running with the carbon buildup, do NOT run mobil one. It will clean the engine down, like it is supposed to, but then the motor will blow smoke and use oil because the clearances are too large in the engine now, courtesy of the carbon being cleaned away.  

I have seen engines requiring rebuilds because of this (hyundai excel, and toyota corolla).

Mobil one is a good oil, but it needs to be used for the lifetime of the engine for it to work properly.

I will not be running it in my GTR when it lands for these reasons, but if i rebuild the engine, then i will run mobil 1 after the running in period.

Just my 2 cents  :D

Ill pay those 2c too cause that makes sense. My engine had very little carbon build up which is the reason it looked so clean. Hmmm maybe i wont switch to Castrol...the plot thickens :(

The reason Mobil 1 is black when it comes out of your engine is that is has been cleaning carbon and blow-by buildup, like it is supposed to. I work for Mercedes Benz, who use mobil one in all their engines (including the 370kw twin turbo V12) and they never have a problem with their engines at all.  

On the same note, if you have an older engine which has been running for 150,000 kms or more, and is used to running with the carbon buildup, do NOT run mobil one. It will clean the engine down, like it is supposed to, but then the motor will blow smoke and use oil because the clearances are too large in the engine now, courtesy of the carbon being cleaned away.  

I have seen engines requiring rebuilds because of this (hyundai excel, and toyota corolla).

Mobil one is a good oil, but it needs to be used for the lifetime of the engine for it to work properly.

I will not be running it in my GTR when it lands for these reasons, but if i rebuild the engine, then i will run mobil 1 after the running in period.

Just my 2 cents  :D

That is good to a point...the fact is that it depends on clearances age of engine etc etc etc. you cannot compare a Nissan RB25 to a Mercedes...even the base crap cause the materials uses are different.

Different oils should be used for different situations. I woul dput Mobil 1 in a Honda, but never a turbo car out of Japan.

With the Mobil 1 then it was used after the car had done 30,000, I changed to Motul at about 50,000 and when the engine was stripped, it was NOT clean...and shit loads of blow by (some of which i have said is due to the crap running in by the original owner). I have seen engines using Castrol crap oil that have come out cleaner and with less blow by...

So there is no way you can tell me that the Mobil 1 in 20,000 "cleaned" the carbon deposits on an engine that had done 30,000. the fact is that it always came out balck and crap and the Motul never did, the car ran better, held oil pressure better etc etc...

I will stick to the 10w-40 Motul Semi that was recommended to me...not cause my cousins, uncles aunts left nut said so, but because this is from people that BUILD engines. Each to there own...

And never noticed the oil pressure problem...but ive heard enough that i may start to use the Castrol...

Anyone have any thoughts on OWS?

I used Castrol Formula R, both 5W-30 and 10W-60 for around 15000km. After that I switched to Motul 8100, and ended up with a really dirty exhaust (evident on my rear bar) and a blocked/collapsed lifter requiring a full engine flush. You could say that the 8100 was to blame here, but really it was the Castrol and whatever crap oil the previous owners had used. The Castrol should have at least done a semi-decent job of cleaning out the engine internals but it either did nothing or added to the buildup of scum. So when I put the high detergent 8100 in, it caused all the sludge to come loose and block a lifter.

Ran one sumpful of Fuchs after that, and I'm now back to 8100 and the exhaust is much much cleaner. I don't expect anything to become blocked again.

I have just run a bottle of Mobil1 through my R32 GTR and have found that like amaru, I have lost oil pressue residing at 1 bar, some times below, before the change the engine ran beautifully making some other GTR owners very gealous.

I have an ACR Oil cooler and have had to block it off and the oil would never get to temp.

I also have more engine noise and rougher idle. I test'd the oil level today and the level was norm, down a touch, but the oil is back as night.

I will be changing oil tomorrow without a view to retuning to my faithfull mobil 1 (was a subaru owner before and MOBIL 1 is the only oil for them), I have been recommended to try Penzoil 10-30, but failing that I will go to Motul or castrol.

any experiances with Penzoil?

But as a whole, I wont be using Mobil 1 ever again. Bad idle oil pressure, it also started burning off after 4000kms (which a few other GTR owners I know report the same problem) which is apparantly due to its chemical structure breaking down earlier compared to other oils, and when drained after 4000kms it came out semi thick and sludgy. Didnt install me with confidence after seeing it come out.

I had the same issue in our SR20DE pulsar. mobil 1 looked good and hadn't used much, then i drove it around for a few weeks and then did an old pac run, next time the oil was really dark, and just about down to the low mark. the speed with which it changed did not please me at all, one minute it was a light gold/brown colour and full and the next it looked tired and empty. been using motul 8100 since then, and I use motul in my R31 as well. normally change between 3000 and 5000 (when i feel like it) and the motul comes out looking good. the previous owner used to change mobil 1 every 3000km which would be a decent drain interval for that oil. however, i prefer to use something a little better.

have also used castrol synth r 10W60 on the track and it does hold oil pressure better in general but for city driving i prefer to use a thinner oil.

Oil is supposed to go dark as it absorbs soot created in the combustion chambers. Personally I haven't noticed any difference in colour in any oil that I've drained over the years. It's always been black in the drip tray (the drip tray is also black so that might influence the colour I see), but on the dipstick you can see that it's still golden brown at the edges. I've never been able to tell if one type of oil is better than another based on how quickly it turns black.

Dark oil is doing its job - holding particles in suspension. If you drive 10,000km on an oil and it comes out looking like new then it must be a shit oil. Your engine will probably rattle to a halt soon if that happens :)

However if the oil gets REALLY dirty REALLY quickly then something else is going on that shouldn't be.

Dark oil is doing its job - holding particles in suspension.  If you drive 10,000km on an oil and it comes out looking like new then it must be a shit oil.  Your engine will probably rattle to a halt soon if that happens :)

However if the oil gets REALLY dirty REALLY quickly then something else is going on that shouldn't be.

It also depends on the dtergent level...this will influence how well it works...or should I say cleans the engine. The quality of oil shows how it lubricates with less metalic particles, as for the soot/carbon this should be absorbed somewhat by the filter...the rest of the oild should suspend it...

  • 5 weeks later...

What about the RedLine Oil compared to Motul. I've been using Motul for a couple of years now on my NAc ars and also on the RB20det. I've been very happy with it. I did try a few other ones but always came back to Motul. So far i haven't tried the Redline but heard all the best about it. It is a bit pricey.

Redline is pricey. I just spent $220 on enough for the gearbox and the diff. Ouch. The lightweight shockproof has certainly helped the gearbox. Just have to make time to do the diff before Phillip Island Sunday.

I haven't changed my gear or diff oil yes since i bought my R32 so its well overdue. What would you recommend? The gearbox is Auto and the car is pretty stockish at the moment but a few things will change in the upcomming months. So Motul? ... or something else?

Pretty happy so far with the improvement in the gearbox. Cheaper than a rebuild. For manuals you need 5 quarts of the blue lightweight shockproof.

I went with the SAE 80W120 for the diff due to the mount of racing I do and the current tired state of the diff. The diff needs 2 quarts to do the job.

For the Auto you need to use an authorised service centre due to the need to flush out the old oil in the box and torque converter. Try the website http://www.redlineoil.com.au

Hey guys, jus changed my oil today and for the first time tried Motul 8100 after reading some threads on here. I must say, almost immideitly i noticed a huge difference. (i used to use penrite) The accelration, idle and 1st gear was so much smoother then ever before. Even though its a bit pricey (well compared to most of the shelf oils), i think its worth it cos a full tank of premium unleaded costs about the same amount as a 5L bottle of 8100. I dont think i wil put anything else but 8100 from now on. Anyways thats my 2c on how my R33 gtst goes on 8100.

Just thought I'd add my experience

When I bought my car it had just been serviced with Nissan 7.5-30W, and I used it for a few changes, the car was stock at the time

I switched to Mobil 1, and found it ok, and used it for around 6 months. The car was serviced and they used Fuchs 5-50W, which felt a little better than the Mobil 1, but went thin really quickly and oil pressure was unstable

I then switched to Motul 8100, I used this for about a year, it was pretty good, the oil pressure gauge would be lower than normal, but the stock gauge is hardly reliable

I recently switched back to Mobil 1, mainly becasue of the fact the store I went to ran out of Motul at the time.

To be honest, it felt heaps better, it even idles better (dunno why but it does) I just changed it the other week, again for Mobil 1 and I couldn't be happier.

The Mobil 1 I used was the 5-50W not the really thin stuff.

I'd say, from my what I have found, the Mobil 1 seems to be the better.

Haven't tried the 300V Chrono Motul stuff, this is supposed to be better again

Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to the new year, gang! We've ticked over into 2024, so as usual, we're starting the new year with a chill social out at Aqua Golf! So without any ado, here are the details: Date: Saturday 22nd March Location: Aqua Golf - Penrith Panthers Time: 4:00pm Map: http://tinyurl.com/saunsw-aquagolf All you need to do is bring yourselves down to Penrith Panthers to come and say "HI", hang out, and maybe hit a few golf balls at the drive range. Who knows where the night may take us... What we do know is that there are plenty of food options available at the Penrith Panthers complex. For those of us keen to hit a few golf balls, prices start from $7.00 a bucket. Aqua Golf is open til late, so we have plenty of time to have a few hits and laughs with each other! This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks all! Looking forward to seeing you all there!
    • Kicking off our first Sunday Session for 2025, we'll be heading to the delectable Self Raised Snack Shoppe!! Get your tastebuds ready for a mouth-watering toastie and coffee! As always, this is the best place to meet up with the SAUNSW fam for a coffee, bite to eat, and a chat! So what are you waiting for? Block out the calendar, set your alarm in the morning, and come down to hang out with the SAUNSW fam! Date: Sunday 9th March Meet Location: Self Raised Snack Shoppe - Shop 4, 8/20 Sarsfield Cct, Bexley North NSW 2207 (carpark entry via Slade Road) Meet Time: Meet at 8:00am Map: https://tinyurl.com/saunsw-selfraised This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAUNSW event and will be run under a Motorsports Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Pre-empting heat management  1. The Kraken manifold will be ceramic coated 2. Just purchased some peel and stick heat shielding stuff from car builders, I'll cover some of the firewall behind the dump and a little on the cam cover, this will be done prior to installation as I have ample room to get where I need to now before that realestate has more bits in the way, I'm also planning to modify the OEM heat shield to go back on, but that won't happen until after installation so I know where to hack it up, I'll also cover it with some some peel and stick to neaten it up after the hacking 3. As the dump is stainless with a flex joint coating isn't really a option, and wrapping isn't recommended for a stainless dump, so once it is installed I'll grab some shielding from car builders to cover the dump, as it has some stand off, it "shouldn't" cause any issues and it "should" just keep the radiant heat away from " melty engine bay stuff" Not for heat management, but I've grabbed some more black crinkle coat to paint all the shiny intake pipes, I'll pick the pipe work up prior to installation and use the paint booth and big oven at work to cure them, I'll then wrap them with some bubble wrap so they stay nice during installation
    • We're back on, gang - Our yearly pilgrimage south to our favourite cafe for an awesome brekkie! Yes, that's right... we're heading down to Austi Beach Cafe for a breakfast run through the Royal National Park! Before you drool over your phones/keyboards, here are the details: Date: Sunday 23rd February Meet Location: Loftus Oval Carpark, Royal National Park, Sutherland Meet Time: Meet at 7:00am for a 7:30am departure Destination: Austi Beach Cafe, 104 Lawrence Hargrave Drive, Austinmer Map: http://tinyurl.com/saunsw-austicruise  RSVP: If you are planning to sit and have breakfast with us, please let us know, either by posting in the event, or by messaging us direct so we can confirm numbers with the venue. Itinerary: We will meet at Loftus Oval Carpark which has plenty of room and is low car friendly. This is a quick turn into the Royal National Park and some nice roads and scenery. After Stanwell Tops we will turn off and head onto the awesome Sea Cliff Bridge. Following this it is a short trip to Austi Beach Cafe. There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • YO- have been searching and searching for an a31 chassis plug pinout, or someone who knows which wire is for tach.  ceffy was flooded past dash during a hurricane.  having an electrical gremlin appear. tach is wonky reading consistent with a short, and on occasion the right side of my speedo lighting will flicker just for a second then go back to normal.  if no pinout available does anyone know if the tach harness opens or branches anywhere behind the dash? im suspecting a possible root behind the radio as there are more shorts in that area on the accessory loop.
×
×
  • Create New...