Jump to content
SAU Community

Recommended Posts

i went to my machanic the other day as i've been noticing a strong fuel smell from my car, he noticed it as well and before asking me what petrol i use he says you use BP ultimate don't you, he then told me that theres been a few problems with the fuel and the seals on fuel pumps, a few people using the fuel have had this problem and have had to replace fuel pumps but it not being covered by insurance due to "contaminated fuel" just seeing if anyone has heard of this latley??

Link to comment
https://www.sau.com.au/forums/topic/48512-bp-ultimate-problems/
Share on other sites

Check that the fuel cap is secure, and that there are no leaks near or around. Also jack up the car and check underneath where the tank is for any leaks, could just be a small leak that can easily be plugged up...

you wouldnt want that to catch alight from the exhaust.....big dramas....

Let us know what you find out..

I work at Bp shepparton here in VIC and our BP ultimate is far better than those that are in the city, the reason you get bad fuel is that if you live in urban areas , the simple answer is more people use fuel and with a 5000 litre fuel tank the last 1000 is basically dregs take my advice fill up in the early hours of the morning when they've just filled the tanks or fill up in stations not used as much, those out of the way bastard truck stops

Patchy, I am sure there is some truth in what you say, but I would be surprised if 20% of a tanks contents could be considered to be "dregs". If station tanks, pumps and filters are properly maintained, this should not be an issue. Clearly it is with some, though.

Cheers.

it would not be 20% of tanks if you considered that premium, unleaded and diesel all house about 35,000 litres. Bp ultimate is the smallest tank and about those filters i have been working at bp for over 12 months and have never seen any cleaning done to the tanks or the filters so unless there self cleaning... How clean is your petrol?

i have managed a servo, and let me ask you, have you ever seen any big pumping trucks flushing the tanks out to clean them, i have never heard of it being done at quix(mobil) EVER. never personally seen or heard of them being cleaned and at quix as long as the water is below 1000L it is deemed clean, reassuring huh?

Hi guys. I have a little knowledge of refineries and the chemistry involved. My understanding is that the BP Ultimate is refined as a 98 octane fuel, which means that the crude cut used as the base fuel is at or near 98 octane. Whereas the Shell Optimax is a base 95 octane fuel (or maybe 96), which then has various additives mixed in to boost the octane level. This way, Shell save on refining costs, but have more additive costs - the refining costs will be the bigger of the two!

Any gasoline fuel, if left for a long period in an atmospheric tank (which all station tanks are), will "weather" - i.e. they will gradually lose the more volatile components (it's all a matter of vapour pressure and the tank "breathing"through the vent). This will generally cause the octane of the weathered fuel to be reduced.

Hope this helps.

Cheers.

Some early R32 and R33 Skylines arn't preimum fuel cars and therefore you shouldn't be using preuim fuel anyway, if your Skyline is after 1995 then they will all be preimum only cars, where as before that it's a mix so you should look up your manual that check that out.

Some unleaded cars will have problems with preimum fuels as they will burn out filters etc quicker than normal.

Also about the fuel:

BP Utimate and mobil Vortex, are 98% ron fuel they don't have any cleaners in them.

Shell optimax is 98% ron fuel but with a cleaner in it, so it will help to clean out your fuel system.

I've run Shell optimax in my own unleaded car it ran much better but Shell state that you shouldn't use premium fuels in unleads more more than once or twice in a month as it can cause problems for the engine.

Also had a WRX and ran all 3 types of fuel through it and the Shell fuel ended being the best out of the three providing much more power and resposne.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can also smell fuel in oil if that helps. 
    • Hello, after engine rebuild(new cylinder liners and piston rings, arp headstuds, metal cometic tripple layer gasket, all new main/rod bearings) and roughly 100km made I did measure compression and it’s (1-6) - 80, 60, 90, 120, 110, 135. It’s rb25det series 1 - hydraulic lifters. Measured on cold engine. Didn’t check on hot due to overall car problems such as broken 3rd gear, idle issues, misfire etc. I did smoke test only on 2nd and 5th cylinder bcs soldering iron used with this method broke itself. So after setting cams to side - side 90 left/right angle I can see smoke coming off from intake manifold and turbo exhaust flange. 5th didn’t notice any smoke. Shop did head, valve etc job but I assemble it by myself. So I thinking about lifters. I don’t remember if they were soft or not it was long time ago. In my opinion I didn’t bleed them and they can be opened more than they should be. Can it be more likely possible? Or timing can be off by 1 teeth and can cause such weird compression? But if timing would be out wouldn’t it be like such big difference across all cylinders? Please help I’m so sad it happened. 
    • Hey, yeah I really like the color. Only paint I'd rather have is KN6, but those are expensive. Right now I'm trying to get the car to the point where I can get it tuned to 370hp so the whole setup can be driven legally, and pass the next inspection that is already due anyway. Beyond that lots of rust fixing I'm afraid, winter project is most likely going to be a front end teardown and fixing the strut tower rust. I know these can be driven daily but I don't think I will do so anytime soon. Will post a build thread soon with a list of issues and futute plans.   Cheers
    • Wanted to reply to this topic. I'm in the somewhat same boat with our Stagea. I'm trying to install a different rear diff. The Stagea/Skyline uses mounts on top of the rear diff for the ATTESA pump. Any way you can relocate the pump? I did find this kit https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34
    • So here's the deal, my wife picked up an S2 AWD Stagea. Super cool, clean car. Looks like the owner in Japan went track spec as it's got some heavy modifications including Exedy twin disk, tension rods, coilovers, GTR brakes, oil cooler & a Nismo 2 way rear diff. Now, cool mods for sure. But, she is just using this as a casual daily driver. The 2 way rear is AGGRESSIVE. It also has solid subframe bushings & poly diff bushings. So that doesn't help either. So far I've tried changing the diff fluid to the correct fluid. Even tried a little friction modifier. No help. This thing clunks, skips the tires & has some slight whine/NVH when driving. Might sound like I'm being picky, but just trying to find a better solution. Here in the states, it's impossible to find a Stagea rear diff. No luck. I do have a 300zx non-turbo diff. Same ratio, 5 bolt axles. On the Stagea, you need both front & rear diff ratios to match. This car is a 4.083. I'd like to just swap a normal rear diff into this thing. Nothing fancy. Even open diff is fine. She's not tracking the car LOL The difference is that the ATTESA pump mounts to the top of the rear diff. There are 3 total mounting points for the pump on top of the diff. With all this being said, what would be the best way to go about this? I could remove the Stagea diff & see if I could get somebody to possibly weld the 3 tabs/mounting points onto the 300zx diff so we could mount the pump on the 300zx diff. I could swap the internals from the 300zx into the Stagea diff but this is not in my comfort zone. Is it possible to mount the ATTESA pump to the underside of the car? Sorry for the paragraph. Just trying to figure out how to go about this. Any help is much appreciated! Stagea Differential - Note two top tabs, one bolt hole for ATTESA pump mounting   300zx Diff - No mounting tabs Also found this mounting kit ?? https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34  
×
×
  • Create New...