Jump to content
SAU Community

Recommended Posts

i went to my machanic the other day as i've been noticing a strong fuel smell from my car, he noticed it as well and before asking me what petrol i use he says you use BP ultimate don't you, he then told me that theres been a few problems with the fuel and the seals on fuel pumps, a few people using the fuel have had this problem and have had to replace fuel pumps but it not being covered by insurance due to "contaminated fuel" just seeing if anyone has heard of this latley??

Link to comment
https://www.sau.com.au/forums/topic/48512-bp-ultimate-problems/
Share on other sites

Check that the fuel cap is secure, and that there are no leaks near or around. Also jack up the car and check underneath where the tank is for any leaks, could just be a small leak that can easily be plugged up...

you wouldnt want that to catch alight from the exhaust.....big dramas....

Let us know what you find out..

I work at Bp shepparton here in VIC and our BP ultimate is far better than those that are in the city, the reason you get bad fuel is that if you live in urban areas , the simple answer is more people use fuel and with a 5000 litre fuel tank the last 1000 is basically dregs take my advice fill up in the early hours of the morning when they've just filled the tanks or fill up in stations not used as much, those out of the way bastard truck stops

Patchy, I am sure there is some truth in what you say, but I would be surprised if 20% of a tanks contents could be considered to be "dregs". If station tanks, pumps and filters are properly maintained, this should not be an issue. Clearly it is with some, though.

Cheers.

it would not be 20% of tanks if you considered that premium, unleaded and diesel all house about 35,000 litres. Bp ultimate is the smallest tank and about those filters i have been working at bp for over 12 months and have never seen any cleaning done to the tanks or the filters so unless there self cleaning... How clean is your petrol?

i have managed a servo, and let me ask you, have you ever seen any big pumping trucks flushing the tanks out to clean them, i have never heard of it being done at quix(mobil) EVER. never personally seen or heard of them being cleaned and at quix as long as the water is below 1000L it is deemed clean, reassuring huh?

Hi guys. I have a little knowledge of refineries and the chemistry involved. My understanding is that the BP Ultimate is refined as a 98 octane fuel, which means that the crude cut used as the base fuel is at or near 98 octane. Whereas the Shell Optimax is a base 95 octane fuel (or maybe 96), which then has various additives mixed in to boost the octane level. This way, Shell save on refining costs, but have more additive costs - the refining costs will be the bigger of the two!

Any gasoline fuel, if left for a long period in an atmospheric tank (which all station tanks are), will "weather" - i.e. they will gradually lose the more volatile components (it's all a matter of vapour pressure and the tank "breathing"through the vent). This will generally cause the octane of the weathered fuel to be reduced.

Hope this helps.

Cheers.

Some early R32 and R33 Skylines arn't preimum fuel cars and therefore you shouldn't be using preuim fuel anyway, if your Skyline is after 1995 then they will all be preimum only cars, where as before that it's a mix so you should look up your manual that check that out.

Some unleaded cars will have problems with preimum fuels as they will burn out filters etc quicker than normal.

Also about the fuel:

BP Utimate and mobil Vortex, are 98% ron fuel they don't have any cleaners in them.

Shell optimax is 98% ron fuel but with a cleaner in it, so it will help to clean out your fuel system.

I've run Shell optimax in my own unleaded car it ran much better but Shell state that you shouldn't use premium fuels in unleads more more than once or twice in a month as it can cause problems for the engine.

Also had a WRX and ran all 3 types of fuel through it and the Shell fuel ended being the best out of the three providing much more power and resposne.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, so widen your search to any Nissan speedo first, then go wider if needed. I will say though, that there is a better than even chance that what I said first will likely come into play. They quite possibly won't come apart without damage. I tried to disassemble a stepper gauge that I wanted to repair. There was no way that needle was coming off the spindle, and I could not see how the spindle would come out of the mechanism behind. Assembled once, never to be disassembled, was my conclusion. Could be the same on the R34 cluster. Failing that - take the cluster to a workshop that specialises in automotive instrument work. There's usually at least one in every Australian city. They'll either be able to do it for you for small cost, or tell you it can't be done. It might be that "it can't be done" unless you follow some arcane procedure, including trickiness to glue it back together or something, that only experienced techs know.
    • Well, given that I, an engineer, almost never bring out the torque wrench to tighten up chassis bolts, despite fully knowing the theory, and instead rely on feel, which I happen to know is exactly how the majority of mechanics do things, should tell you the level of actual peril that exists from not achieving exactly 88 Nm of torque. How about if I just say then that 88Nm is at the lower end of the correct wheel nut torque range? Everyone knows how to tighten a wheel nut, right? And almost no-one ever brings out the torque wrench for that task
    • Don't be ridiculous. "2-3 ugga duggas or one Oof. You have to use Oof on tie rods because you can't get an ugga dugga on there." Is not helping the guy at all.
    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
×
×
  • Create New...