BNR34 split ecu/abs/headlight hairness

[bigboss59400]

Hello 

I'm going to make a new engine hairness to support my aftermarket ecu so the old engine hairness is not needed however I noticed that the engine haurness contains also the abs and headlight one.

I looked at the diagram and to my mind there are separate, just need to remove the tap and I should be able to remove the engine part and leave the abs and headlight.

Anyone done this ?

Best retards 

[Duncan]

Sure can, just split out what you need (or don't). You might find there are some cross dependencies you need to handle like shared power or earth, but just keep what you need

[r32-25t]

Definitely can be done, and then I put them back into my new harness when I made it 

[bigboss59400]

Thanks for your replies,

I have move forward, it's a time consuming task

Did anyone find these 2 connectors ? they are located next to the ECU

As I would prefer to use new connectors, or at least new pins to crimp new tefzel cable

One is related mainly with ABS, the other is more into MFD signals and wiper

Edited January 16 by bigboss59400