Jump to content
SAU Community

What Discontinued Trim Do You Want Back?

Junsei

By Junsei,
in Exterior & Interior Styling

 Share

Recommended Posts

Junsei Rookie

Junsei

Posted
Posted (edited)

Hey guys! 

We're Junsei Auto Parts from Sydney and we remake discontinued interior trim, 1:1 identical to OEM quality.

We've been bringing back discontinued interior trim for the R32 and JZA80 Supra. So far we've remade the R32 Stereo Fascia Surround and the Dash Defrosters, pics below 👇

We're here to ask what discontinued parts do you want back? Not limited to any Skyline! Drop your suggestions and we'll see what we can do! 

Check out our R32 parts here: https://www.junseiautoparts.com/collections/nissan-skyline-r32

FrontFascia-1.jpg?v=1695801053&width=990R32FrontDashVent_1of2.jpg?v=1691218334&width=990

Edited by Junsei
Junsei Rookie

Junsei

Posted
  • Author
Posted
8 hours ago, GTSBoy said:

At least the hinge, if not the whole lid, for the armrest. Not the normal low height, longer armrest that was standard. The taller, shorter length one with the cupholders under it that was an uncommon option.

Like this OEM option? We can do that, we could definitely do the whole lid, OEM leather and all. 
Nissan Skyline R32 OEM Optional Cup Holder BNR32 GTR NISMO JDM Interior - Picture 2 of 10


 

GTSBoy Grand Master

GTSBoy

Posted
Posted

Yuh, I have that one and the hinge is broken and the vinyl on top is cracked from years of elbows. I have been meaning to put effort into doing a better job of repairing the hinge (already done once, years ago, didn't last) and retrimming the top. But new made replacements would be even better.

The hinges are very low science, basically just being folded plastic. Any effort spent working out what to do to fix it on this lid would probably (maybe only possibly, depends on whether there's any commonality) be applicable to the normal lid's hinge too.

  • Like 1
Junsei Rookie

Junsei

Posted
  • Author
Posted
8 hours ago, GTSBoy said:

Yuh, I have that one and the hinge is broken and the vinyl on top is cracked from years of elbows. I have been meaning to put effort into doing a better job of repairing the hinge (already done once, years ago, didn't last) and retrimming the top. But new made replacements would be even better.

The hinges are very low science, basically just being folded plastic. Any effort spent working out what to do to fix it on this lid would probably (maybe only possibly, depends on whether there's any commonality) be applicable to the normal lid's hinge too.

Would you prefer a complete arm rest lid unit or a cheaper DIY kit that includes vinyl and new hinge?

GTSBoy Grand Master

GTSBoy

Posted
Posted

For me, just a DIY kit to replace the hinge and vinyl/padding. The rest of mine is structurally sound.

Whether you would find enough takers (for even that much effort spent) to justify the work is a harder thing to estimate, as there are very few of these out in the wild.

If you were to make the whole thing, including the armrest for the top part and the cupholder that replaces the original armrest, you might be able to sell them to people who would like to upgrade. If there are enough of them, that is.

silviaz Experienced

silviaz

Posted
Posted
20 hours ago, Junsei said:

Hey guys! 

We're Junsei Auto Parts from Sydney and we remake discontinued interior trim, 1:1 identical to OEM quality.

We've been bringing back discontinued interior trim for the R32 and JZA80 Supra. So far we've remade the R32 Stereo Fascia Surround and the Dash Defrosters, pics below 👇

We're here to ask what discontinued parts do you want back? Not limited to any Skyline! Drop your suggestions and we'll see what we can do! 

Check out our R32 parts here: https://www.junseiautoparts.com/collections/nissan-skyline-r32

FrontFascia-1.jpg?v=1695801053&width=990R32FrontDashVent_1of2.jpg?v=1691218334&width=990

Nice work there, the fascia looks great! 

Junsei Rookie

Junsei

Posted
  • Author
Posted
On 2/6/2024 at 6:47 PM, GTSBoy said:

For me, just a DIY kit to replace the hinge and vinyl/padding. The rest of mine is structurally sound.

Whether you would find enough takers (for even that much effort spent) to justify the work is a harder thing to estimate, as there are very few of these out in the wild.

If you were to make the whole thing, including the armrest for the top part and the cupholder that replaces the original armrest, you might be able to sell them to people who would like to upgrade. If there are enough of them, that is.

Yeah that's a tricky thing to figure out. We'll do some polls to get some more info. Where should we post them?

  • 1 month later...
GTSBoy Grand Master

GTSBoy

Posted
Posted
38 minutes ago, joshuaho96 said:

It's worth it because you can flip it for 1400 USD on Americans that can't look up part numbers for some reason.

And they also confess that they just 3D printed them! Which makes me wonder if they will buckle in the heat worse than the originals did. Perhaps I need to hire a Chinese hacker to get the print files out of Nismo's server?

DaymoR32 Proficient

DaymoR32

Posted
Posted
15 minutes ago, GTSBoy said:

And they also confess that they just 3D printed them! Which makes me wonder if they will buckle in the heat worse than the originals did. Perhaps I need to hire a Chinese hacker to get the print files out of Nismo's server?

Not necessarily, completely depends on how its printed and what material they use. i cant see Nismo using a $200 FDM printer and PLA 

Junsei Rookie

Junsei

Posted
  • Author
Posted (edited)

The R32 defroster vents were definitely on our to-do list, but now that Nismo announced that they're remaking them we're not 100% sure if we should as well, they did however state that the vents will be 3D printed, which may be the reason as to why its a 3 piece design rather than the original 2 piece design.

That being said we were planning on remaking these using Injection moulding which is how the originals would've been manufactured, and they were definitely going to be priced lower than what Nismo is currently pricing their vents. As for the material we were looking at using AES plastic, which is like ABS plastic but has UV protection properties. 

As of right now we'll just have to wait and see whether the Nismo vents are up to standard or not and we'll go from there.

Edited by Junsei

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • kevboost7
      Magnetic Drain Plug Snapped in Half

      By kevboost7 · Posted

      Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • MBS206
      New fix for low tyre pressure from bmw

      By MBS206 · Posted

      Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • dbm7
      New fix for low tyre pressure from bmw

      By dbm7 · Posted

      Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • joshuaho96
      Anyone know this frontpipe?

      By joshuaho96 · Posted

      You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...