Jump to content
SAU Community

CES Split dump pipes


Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Guys, CES is one of the Best exhaust fabricators in Australia

Goto www.cesracing.com.au to read about them

All ive ever heard about CES has been good

$650 for this; HPC coated is awesome!!

If we get 10 im in definate.

Guest darrinspencer
Wizard count me in for sure as long as i can pick up the dump pipe within the next couple of weeks. I am very interested... Also what would be the difference between the plain steel and the HPC coated?

The $650 price is for 10 steel pipes HPC coated

If we split them up, some with HPC and some without It will adjust the $650 price

Prices quoted were broken up as

10 pipes $530 each plus hpc $120 each total $650 each

5 pipes $550 each plus hpc $130 each total $680 each

So depending on what option we end up with the final cost may be affected

One thing Trevor suggested was that on Skylines with their fairly low mount of the turbo the HPC would have a less of affect and you could get away from not using it.

Apart form the high heat reducing affect from HPC, it also stops the mild steel pipe from rusting, which IMO is worth while.

There seams to be a few GTR owners keen to participate in this group buy. If it was possible to include dump pipes for an R32/R33 GTR in the group buy I think you would make up the numbers required a lot quicker. I would be keen for starters...

Lawrence

Guest darrinspencer
There seams to be a few GTR owners keen to participate in this group buy. If it was possible to include dump pipes for an R32/R33 GTR in the group buy I think you would make up the numbers required a lot quicker. I would be keen for starters...

Lawrence

We need to get 10 people for 1 type of dump pipe not a mix up of both

CES make 10 at a time, hence we need to get 10 people together for 32/33 GTST to get the better price.

To organise a group buy is a pain in the arse for who ever organises it.

Some people want one, some are interested but do not confirm if they want one, some want one then pull out when it is time to pay which really stuffs things up as it has recently happened in my last group buy for flywheels

I am only doing this so I can get a cheaper price for my car.

If you want to organise a GTR dump pipe group buy feel free.

Guest darrinspencer
There seams to be a few GTR owners keen to participate in this group buy. If it was possible to include dump pipes for an R32/R33 GTR in the group buy I think you would make up the numbers required a lot quicker. I would be keen for starters...

Lawrence

I will be now including GTR as aswell

I will update the first thread soon with prices when I can fit it in between work.

Guest darrinspencer
There seams to be a few GTR owners keen to participate in this group buy. If it was possible to include dump pipes for an R32/R33 GTR in the group buy I think you would make up the numbers required a lot quicker. I would be keen for starters...

Lawrence

GTR and GTST are now included in the group buy

Please read the first thread for all the details and prices

Please read the group buy rules aswell.

Thanks

NewB question... what the hell does the waste gate do?? Is it essentially there to create less turbulence as the two exhaust streams meet at a similar velocity?? I'm not too sure.

BTW this will bolt straight on to a stock R33 GTS-t?? If so, is it a DIY jobby?

(In case ur not sure ,I am seriously interested in one of these... just depends on when I can get it etc.)

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...