Jump to content
SAU Community

Recommended Posts

Hi guys, I have a ECR33 97 model. Engine has a cracked ring land. Would it better to rebuild the series 2, or buy a second hand AWD 25det Neo from Japan from ~$3500 tidy it up a bit with new seals and so forth and use that? 

I'm leaning more towards the NEO option but understandably they're very old engines too now, so could be just buying problems. Cheers.

Link to comment
https://www.sau.com.au/forums/topic/485492-rebuild-vs-second-hand-neo/
Share on other sites

An excellent question. Both answers are correct.

I think the reality is that any Neo you get from Japan may well be the same as any other engine that has spent too many years in Japan. That being the problem of low to zero maintenance and oil changes, etc etc. So any Neo you get from Japan should be considered to be sufficiently risky to warrant planning to pull it apart and rebuild it anyway. That's a significant extra $3.5k impost on top of doing the same to your S2 engine, and the question has to be asked, would you rather have the (somewhat small) betterness of the Neo for $3.5k, or would you rather spend up to $3.5k on even better betternesses for the S2? New ECU? Better triggering? Better oil pump, sump, cam covers, etc?

6 hours ago, Blakeo said:

I'm leaning more towards the NEO option

I would avoid the AWD motor in a RWD using a modified RWD sump and pickup.

The way the pick up is positioned, you'll have oil pick up issues on hard acceleration on a track around bends.

Even with a baffled, gated sump.

I suppose if you don't race on a track and it's used for straight line activities or street use you might be ok.

  • Like 1
5 hours ago, admS15 said:

I vote for rebuilding current RB. At least you'll know exactly what condition your engine is in afterwards and no future unpleasant surprises. 

Best option, at least it's not an engine lottery.

These NEO motors are close to 30 years old, they're doing ok.

  • Like 1
15 hours ago, Dose Pipe Sutututu said:

I would avoid the AWD motor in a RWD using a modified RWD sump and pickup.

The way the pick up is positioned, you'll have oil pick up issues on hard acceleration on a track around bends.

Even with a baffled, gated sump.

I suppose if you don't race on a track and it's used for straight line activities or street use you might be ok.

Yeah, better just to cut the diff off the awd sump and grind down the fins on the bottom.

  • Like 1
13 hours ago, niZmO_Man said:

Yep, back in the day when you could pick up a Stagea RB25 NEO for $1,500 it was worth it. These days... just chuck your V8 or B58 in.

If you're going to go v8 or really any swap now with all the tax, I'd most likely just get rid of the car and start with something else. Unfortunately, I have a mate with a surplus of ls and Ferrari/Maserati v8's that's always tempting me FFS lol.

  • Like 1

Or buy one someone built earlier! ;)

(realistically V8 mustangs or MKV supras are great).

I see people nowadays putting ZF8's into MK4's, and people putting 370z gearboxes, diffs, axles into R and S chassis and it's like.... just get a 370z at that point and mildly boost the 3.7 instead of the 2L and away we go...

My vote is rebuild s2 engine or maybe get a neo (but expect you may need to rebuild that too).

Doing an engine conversion you would have to be a true tragic nowadays and actively be aware there's better/smarter options for value.

10-15 years ago, the answer would always be buy a good import motor and so many machine shops make.a hash of an engine rebuild, or they think they are some sort of RB magicians and want 40k.   

 

Now as others have stated, you are buying a VERY old used motor. So rebuild is the correct answer. 

Just finding a machine shop that will both do a good job and charge you a regular price is now your challenge. 

On 5/10/2024 at 9:47 PM, niZmO_Man said:

Yep, back in the day when you could pick up a Stagea RB25 NEO for $1,500 it was worth it. These days... just chuck your V8 or B58 in.

The complexities involved with getting a v8 swap done, and the sacrifices for clearance etc not worth it imo unless its a drift car or similar. 

What if I told you it fit easier than the RB...... ;)

Realistically it's a lot of work, but suprisingly similar IF you didn't have a R33 with literally all of the supporting accessories and electronics and manifolds and cooling ready to go.

If you had literally a bare engine bay and no transmission, it'd be an apt comparison to make. If you just want to make 280-300kw all day just rebuild the RB and get a modern turbo and enjoy life.

38 minutes ago, Kinkstaah said:

What if I told you it fit easier than the RB...... ;)

Realistically it's a lot of work, but suprisingly similar IF you didn't have a R33 with literally all of the supporting accessories and electronics and manifolds and cooling ready to go.

If you had literally a bare engine bay and no transmission, it'd be an apt comparison to make. If you just want to make 280-300kw all day just rebuild the RB and get a modern turbo and enjoy life.

Yeah I understand what you mean, but the LS swaps I've seen done to r33s (admittedly to drift cars). You have to hammer out the transmission tunnel to fit the t56/tr6060, cut and box the drifters side firewall for head clearance. All stuff that's not terrible, but don't want to do to my cleanish gtst. 

I've decided to buy the NEO and rebuild it, maybe best of both options lol.

  • Confused 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...