BNR34 identify this connector please

[bigboss59400]

Hi,

I'm in the process of making a custom engine hairness however I can't find where this connector is supposed to be connected.

It's a 1 wire.

Any idea ?

Thanks

[r32-25t]

Goes into the plug on the steering rack 

[bigboss59400]

thanks ! that's connected to the EPS solenoid which is control by hicas control unit

[bigboss59400]

in fact it was the oil temp connector that goes into the "secondary" engine hairness (related to starter and alternator etc)

[joshuaho96]

On 7/17/2024 at 11:41 PM, bigboss59400 said:

in fact it was the oil temp connector that goes into the "secondary" engine hairness (related to starter and alternator etc)

That seems different from the one on the R33, which is almost identical to the coolant temp sensor used by the gauge. Basically just a rectangular large flat blade single terminal device.

[bigboss59400]

that is correct to be more precise,

this sensor goes to a loom which contains only the flat blade single terminal (to connected to this sensor) and then the connector shown in my first post.

This loom is tied up to one of engine hairness