Jump to content
SAU Community

Need help locating aftermarket belt RB20

Zabuza

By Zabuza,
in General Maintenance

 Share

Recommended Posts

Zabuza Apprentice

Zabuza

Posted
Posted (edited)

Hey all , was wondering if anybody knows of an aftermarket equivalent for the AC compressor belt on an RB20det . The OEM part number is AY14040925 . Nissan themselves and every other place I have tried says this pitworks oem belt is either discontinued or back ordered. 
 

Edit: Just realized the pitworks belt lists 4PK925 in the center of the packaging , I found a Bando belt with that same number on it, can anyone confirm if they should be the same? 

Edited by Zabuza
Link to comment
Share on other sites
Rezz Grand Master

Rezz

Posted
Posted
22 hours ago, Zabuza said:

AY14040925

I can get this exact belt and ship it to you from Japan if you are still interested in it?
 

  • Thanks 1
Link to comment
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted
On 15/08/2024 at 1:58 AM, Zabuza said:

Edit: Just realized the pitworks belt lists 4PK925 in the center of the packaging , I found a Bando belt with that same number on it, can anyone confirm if they should be the same? 

To be clear, industry standard for belts is xPK is the number of ribs in the belt and xxx is the length. So 4PK925 has 4 ribs and is 925mm long

  • Like 1
Link to comment
Share on other sites
Zabuza Apprentice

Zabuza

Posted
  • Author
Posted
On 8/16/2024 at 6:27 PM, Duncan said:

To be clear, industry standard for belts is xPK is the number of ribs in the belt and xxx is the length. So 4PK925 has 4 ribs and is 925mm long

Good to know, thanks!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • b0nb0n
      No map light, dome light or trunk light after bulb change

      By b0nb0n · Posted

      Hey all new owner here from the states.  Just received my RS FOUR S last week. Went to replace some interior bulbs with LEDs this morning and after changing the first map light bulb I lost all lights to the map lights in front of the rear view mirror, middle dome light, rear trunk light and also the ring light around the ignition. They do not work manually, when the keyless entry is used or when you open the door.   Everything else is still functioning like the head lights, fog lights, cluster, radio etc. I tried replacing the LEDs with the original bulbs but no luck.   I replaced every fuse in the under dash fuse box to be safe, most looked original but none busted. While changing the fuses I noticed the TCM box was loose and could wiggle it around. Not sure if it's related or I just shorted something out while replacing the bulbs. I foolishly did not disconnect the battery prior.   At a loss here, couldn't find any similar cases to mine. I will try to check for continuity tomorrow as a last resort.   Any advice is much appreciated. Thanks in advance.
    • joshuaho96
      Penrite ATF FS

      By joshuaho96 · Posted

      The viscosity is about right for Dexron III/Matic D. 
    • Dose Pipe Sutututu
      Thanks Santa (the neverending trials of the 400,000klm, 400kw, RB30, manual swapped Stagea)

      By Dose Pipe Sutututu · Posted

      Check the wiring behind the headlight that connects back to the engine harness (assuming the stagea's layout is similar) That plug should supply IGN power to the harness from what I remember.
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Thanks... yeop I think anyone thats had to compete or travel more than the usual home track situation gets it and prob even those that havent yet had to do it ... its just harder and costs more fullstop As one goes through this, prob like yourself, you gain and appreciation of effort - almost regardless of the result - but the result can add to it on top This year I did enjoy it alot more even though it was harder ...which is actually good!
    • Duncan
      Thanks Santa (the neverending trials of the 400,000klm, 400kw, RB30, manual swapped Stagea)

      By Duncan · Posted

      Hey Matt, no I think I've misled you...I'm not sure that the ECCS power supply to ECU had 9.5v, just that the ECU reported 9.5v.   Link got back to me pretty quick and suggested to check the IGN power supplies to the ECU Pin 24 is the IGN key signal, which is working OK (ie battery volts with key on IGN) Pin 31 is "IGN power supply" and sure enough that is giving 0v with IGN on So, back to a car side problem, which is good because at least I can work it out here. On the down side I don't have a wiring diagram for Stagea so its the old fashioned trace and check task. @Stick180 I did double check those fuses are OK (I double checked all IGN fuses) and I also pulled and swapped the IGN relays at the driver's knee as a quick check with no change....but something is wrong there somewhere
×
×
  • Create New...