Jump to content
SAU Community

Recommended Posts

hi guys an girls.... so i have a rb25det non neo that is leaking air like a sift from number 5 cyl/chamber. its coming from inside the head behind like the cams an sprigs at first thought it was leaking out a valve so checked that they were closing properly an they seam allgood double checked the valves were not opened by the cams or anything silly . so could there be a crack anywhere in that chamber that is not visable to the eye but big enough to leak alot of air

Link to comment
https://www.sau.com.au/forums/topic/485755-air-leak/
Share on other sites

has anyone else had some thing like this happen. there is no visual damage. but for the amount of air escaping you would defenitly think there would be a big hole somwhere. the only way it could be coming out where it is is if the valve was open an the air would pass by the stem seal which i wouldnt it would go rite out the port that was open... so valves are 100%closed. ill have to just get it looked at down at the shop. will let yous no how it goes

 

Link to comment
https://www.sau.com.au/forums/topic/485755-air-leak/#findComment-7992326
Share on other sites

If you 100% know there is air coming out of the cam cover or crankcase then yeah it could be a hairline crack anywhere on the top end. if you cant afford to replace the whole thing you could add smoke to your intake to trace the leak then just replace the part that's leaking. you never know if could just be a valve? just make sure you clean it up properly afterwards

Link to comment
https://www.sau.com.au/forums/topic/485755-air-leak/#findComment-7992433
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few more recent pics
    • full send the cnut, do this   fark the wrapping and/or stick on siet. These guys are the ones to go to: https://www.realthermo.com.au/  
    • Just had a look, they don't. Fuelling on the base map is purely alpha-N, and the ignition table is MAP. Remember it's just a base map to get the car moving  
    • Hi everyone, I’m Dave from Canberra. Here's a few pics of my 1992 R32 GTST coupe which I imported back in 2006. Only mods so far are HKS Hi-power cat back exhaust, K&N filter, ATC Volanti steering wheel, Pioneer stereo, amp and sub. This was my daily driver up until 2015 and sadly hasn’t been driven at all in the last 5 years due to marriage, work, and kids taking up most of my time and spare cash.As such its in need of a bit of TLC and one of my goals for this year is to get it back to running condition and maybe look into club/historic rego. I’ve joined SAU so I can ask a few questions along the way (although I promise to google Current Problem +SAU beforehand!)
    • From talking to the mx5 guys the NC doesn't actually need bonnet vents like the earlier NA and NB models, due to a better designed cooling system and undertray design There's plenty of them used as street cars and weekend track toys running anywhere from around 170 to 250kw with stock non vented bonnets, I initially was going to get some bonnet vents, but, as they are not actually required, I'll put vents on hold for a while and just monitor temps, though I do need to get something to actually monitor engine oil temps though, coolant temp can be pulled from the OBD2, but the oil gauge in the car is not actual oil temp, it is only a calculation based off coolant temp and RPM ☹️ They do recommend upgrading the radiator, which I have already done with a triple pass, and the only other thing they recommend for a street car is heat management, like I talked about above to protect bits in the engine bay from radiant heat, and to either replace the nearly 20 year old plastic coolant expansion tank, which I have done, or get a aftermarket alloy jobbie for some bling They did also say that if I wanted to track the car on occasion a oil cooler and sump baffle would be required, and as I already have had a sump baffle installed when the engine was out......... I'm going to get a oil cooler with a thermostat....... just in case I do eventually track the car, but probably not, but still maybe...🤪
×
×
  • Create New...