Jump to content
SAU Community

Auto Electrician Workshop Recommendation for Reverse Camera Not Working CKV36 (SYD or WOL)


Recommended Posts

Can anyone recommend a workshop that can repair a reverse camera issue for a CKV36? Started off intermittent but now never works - just shows a black screen with the steering lines when you put it into reverse. For any other purpose, the display otherwise works fine. Would prefer Wollongong area but will travel to Sydney to get it fixed. Dropped by a couple of local auto electricians and they did not know where to start with it (I suppose I prefer this honesty up front rather than spending chargeable hours and not getting anywhere!) Thanks.

On 9/2/2024 at 8:11 PM, JoVo said:

Can anyone recommend a workshop that can repair a reverse camera issue for a CKV36? Started off intermittent but now never works - just shows a black screen with the steering lines when you put it into reverse. For any other purpose, the display otherwise works fine. Would prefer Wollongong area but will travel to Sydney to get it fixed. Dropped by a couple of local auto electricians and they did not know where to start with it (I suppose I prefer this honesty up front rather than spending chargeable hours and not getting anywhere!) Thanks.

Tunehoouse have sounded knowledgeable for our cars when I have spoken to them. I would hope the electricians you took it to at least first checked that the camera was getting power, the impedance across the unit was not 0, and there was continuity between the camera plug and the screen (much more specific technically).

If you have access to a wrecker for these cars, might be cheap to get a camera from a wreck and plug it in to see if an image displays. Of course , the wreaked camera may also be broken. 

  • Like 1
  • 2 weeks later...

yep it will be like that. Where do you mean by "down here"? This forum traditionally was an Australian/NZ one but we've been worldwide for many years now. So 100% state your location first so people can help by providing more localised informations (state your country, it helps a lot).

On 9/2/2024 at 8:11 PM, JoVo said:

Can anyone recommend a workshop that can repair a reverse camera issue for a CKV36? Started off intermittent but now never works - just shows a black screen with the steering lines when you put it into reverse. For any other purpose, the display otherwise works fine. Would prefer Wollongong area but will travel to Sydney to get it fixed. Dropped by a couple of local auto electricians and they did not know where to start with it (I suppose I prefer this honesty up front rather than spending chargeable hours and not getting anywhere!) Thanks.

 

7 hours ago, niZmO_Man said:

yep it will be like that. Where do you mean by "down here"? This forum traditionally was an Australian/NZ one but we've been worldwide for many years now. So 100% state your location first so people can help by providing more localised informations (state your country, it helps a lot).

He said in the OP Wollongong area.

  • 1 month later...

Update: Tunehouse looked into the problem and identified a wiring issue between the camera unit and the connector. They managed to get it working , but did warn me at some point it will stop working again. From their perspective it is unserviceable and will need replacement.

They did some research and found that the new replacement camera would be Approx $1400 supply only (their fitting cost would be $190) . They did provide the part number (28442-JL05B) and a quick google of the part number shows that these are rather expensive brand new (seemingly no longer in manufacture) for the places that still have them in stock, with the used option potentially presenting  the same issue down the track at some unknown point. They are happy for me to supply the part so that they can fit it. Decisions, decisions...

I can definitely recommend Tunehouse (thankyou Vee37!). Cost for the diagnosis was as quoted  ($190) , car was ready on time and communication was top notch. Their workshop is super clean and modern, and there was plenty of car candy parked out the front on the day I went.   Would definitely go back. 

 

It can't be some stupidly proprietary video signal coming out of it that only Nissan's can understand. Surely you can just find some generic camera to stuff in there and use hot melt glue/blu-tac/gaffer tape to hold it in place if need be?

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
    • I used to love stock take. I used to take f**k of a lot of stock. /Rodney Rude.
×
×
  • Create New...