Jump to content
SAU Community

Recommended Posts

I've never used it, but yes R32/R33 GTST and R32/33/34 GTR have similar ECU pinouts so it should be possible. Their doco states a few things including AFM deleted and replaced by MAP that you need to add, no knock sensors (actually lots missing on their "street" ECU), narrow O2 replaced with their wide o2 etc

image.png

Also worth noting that both Link and Haltech recommend replacing the factory intake air temp sensor with a better one as air temp is critical to accurate air calculations with a MAP. I think both r32/r33 GTST need the intake air temp sensor added. MaxxECU just say it is "optional" to have the sensor at all which I think is dangerous.

4 minutes ago, Duncan said:

I think both r32/r33 GTST need the intake air temp sensor added.

Seeing as they don't have one at all, yes, must be added.

I think that MaxxECU is one ECU that I would not consider using. There is no shortage of good choices, so why use something that appears to not be a good choice. I mean, shit - I'd use a Speeduino before I used the Maxx.

13 hours ago, GTSBoy said:

Seeing as they don't have one at all, yes, must be added.

I think that MaxxECU is one ECU that I would not consider using. There is no shortage of good choices, so why use something that appears to not be a good choice. I mean, shit - I'd use a Speeduino before I used the Maxx.

I've personally heard nothing but good things about them. With Haltech using the end user as beta testers and the sheer amount of firmware bugs that have been coming out the last year; If I could do it all over again, Maxx would of been an option. 

1 hour ago, TurboTapin said:

I've personally heard nothing but good things about them. With Haltech using the end user as beta testers and the sheer amount of firmware bugs that have been coming out the last year; If I could do it all over again, Maxx would of been an option. 

Per Duncan's post, Street version has no VCT, doesn't do AC, DOESN'T HAVE KNOCK SENSORS. OK, so you can use the higher end ECUs to claw those things back. But.... if I'm going aftermarket ECU, I'm not using a cable throttle. And...where is that? Um...

12 hours ago, GTSBoy said:

Per Duncan's post, Street version has no VCT, doesn't do AC, DOESN'T HAVE KNOCK SENSORS. OK, so you can use the higher end ECUs to claw those things back. But.... if I'm going aftermarket ECU, I'm not using a cable throttle. And...where is that? Um...

I agree their STREET is limited in features, but both their RACE and PRO models have everything you could possibly need (I.E Knock, Built in EGT, Built in Wideband, Dual DBW, etc.) It's also cheaper in comparison with anything Haltech has to offer and more importantly from what I hear it actually works well. 

I'm a little bias these days as Haltech has really turned into a pile of poop lately.. I don't know what's happening with their firmware team but I'm thinking it's outsourced and their cutting costs. There's always massive bugs, they're not doing any testing, there's no revision control (I.E They acknowledged a few months back that they accidently released an unfinished firmware). It feels like they're being run by bean counters vs actual software & electrical engineers. They seem to be to busy releasing new products as opposed to fixing software issues. As of 2-3 weeks ago they started a beta program to presumably op the rest of the end users out of unwillingly testing firmware's. I'm happy they're starting to listen to all the complaints. Hopefully it gets better fast. 

Edited by TurboTapin

I'm not defending Haltech. They had some golden years, but their history of problem products goes back a loooong time before that and now. My bro-in-law swore off them 15 years ago. Same stuff. Firmware bugs, patchy tech support complete with total ignorance of what was going on.

Doesn't mean that there are not 5 or 6 other excellent options - most of which were also born in Australia.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
    • Generally yes but for some reason I've been ruthless this time around!  I might even need to do another tip run after the way I've finally been able to hit the delete button on shit I've stepped over, stepped around and tripped over for the past 10 years!
    • I just quote the Rolling Stones. Paint it black.
    • It just depends if you're like me with a high level of OCD for doing something like hardlines, and highly critical of the little things, and then bugger all patience to get it how my brain pictures it
    • More than happy with the colour match Talking to the painter he recommended to give the top a few weeks for the paint to 100% cure prior to sealing it with the ceramic stuff Also, because why not..... I have a fancy pants Fluidampr harmonic balancer on order, the 2.5 engine uses the OEM 2.0 balancer off the old motor as the 2.5 balancer is a larger unit and doesn't fit clearance wise, which, because the two engines have different harmonics, isn't optimal, the OEM balancer does the job, but as the gear driven balancer in the bottom end is removed to fit a RWD application there is slightly more vibration, the Fluidampr helps with the harmonics that the gear driven balancer once took care of,  basically makes life easier on the oil pump and bearings when thrashing it around Hopefully the weather gets better soon because I'm keen for some cruising around, and currently, with the winds and storms we are getting, the amount of detritus being blown around from trees on the road isn't something I want to be driving around in
×
×
  • Create New...