Jump to content
SAU Community

Recommended Posts

So, I did a skid pan last Friday at SMSP which I totally sucked at. I'd like to get better at this but it was $350 and I probably got about 20 mins on the pan over the 4 hours I was there which is just not a great ROI. 

I don't have a LSD in the car yet, that will happen before I go again. I was struggling to get the car to be consistent and I think it was the open diff. I also struggled to maintain any control at all once it did step out. More practice needed. 

I found this one but it's a good 7hrs round trip for me. https://www.fifthgear.com.au/course/advanced-skidpan-training

Are there any others that people have been to around Sydney? 

Link to comment
https://www.sau.com.au/forums/topic/485933-skid-pans-inaround-sydney/
Share on other sites

FWIW, the Sutton Road facility is a good one, they have a wet kidney skidpan and a dry area as well as the back track....the club hired it a few times back in the day

The clover and wet pans at Eastern Creek are the only ones I still know of in Sydney, that place is always expensive but different clubs would run different prices/formats

There used to be a place called HART at St Ives, not sure if that still exists.

We used to hire the runway at the tafe at schofields for dry motorkhana, not sure if anyone still does that. And of course that lovely one at Oran Park that is now a housing estate....

Thanks Duncan, HART is only 10 mins from me (I did my bike license there), it'd be awesome if it ran these types of things. 

Sutton Road does look good and they take fewer cars than SMSP which is good. 

Surely you have enough land to lay a few million tonnes of concrete and some sprinklers D? 

4 hours ago, PranK said:

Thanks Duncan, HART is only 10 mins from me (I did my bike license there), it'd be awesome if it ran these types of things. 

Sutton Road does look good and they take fewer cars than SMSP which is good. 

Surely you have enough land to lay a few million tonnes of concrete and some sprinklers D? 

Skip the concrete, we just need to smooth a field.

Mark knows how to drive a grader Duncan ;)

 

I reckon 100x100 flat area for skid pan style, and then some sort tracks for rally...

Duncan's already got a rally car on the premises to...

  • Like 2
13 hours ago, Duncan said:

pretty sure that is about $1M for a 100mx100m slab....I'm gunna need some help on that.

I do have the space and understanding neighbours though

Crowd funding FTW

11 hours ago, PranK said:

Crowd funding FTW

 

On 11/13/2024 at 7:59 PM, Duncan said:

pretty sure that is about $1M for a 100mx100m slab....I'm gunna need some help on that.

I do have the space and understanding neighbours though

I go back to, skip the concrete, we just need smooth dirt/grass...

You weld us up one of those huge take like things you buy at Bunnings for spreading dirt nicely, except we'll tow it behind a car instead of push by hand. 😛

  • Haha 2

I did a motokhana years ago with ??Sydney Sporting Car Club???, it was on a grassy paddock and was heaps of fun, I think it was north west Sydney IIRC

The old R33 boat was covered in grass and dirt, but nothing that a good wash and detail didn't fix

And thinking back, when SAU did the airstrip run in Goulburn years ago, where the old 33 won highest RWD MPH, the quickest RWD ET on the airstrip, and best paint IIRC (before the runs down the airstrip) the damage to the rear quarters from stones flicking up required them the get a respray 

I would definitely do a grass motokhana again in the MX5

Who knows someone that owns a farm with a big empty paddock 

Liability these days is a big issue though

21 hours ago, MBS206 said:

 

I go back to, skip the concrete, we just need smooth dirt/grass...

You weld us up one of those huge take like things you buy at Bunnings for spreading dirt nicely, except we'll tow it behind a car instead of push by hand. 😛

Dragging some reo behind a ute or trailer will smooth out a dirt road, I've used reo a few times to do unsealed road maintenance when we didn't have any plant available 

It's best done when the dirt is wet though, and then you just let it dry out for a day to harden up

For wetting the dirt I've used some 44 gal drums in a ute or trailer, and a water pump connected to a hose with a old sprinkler tied to the reo to wet the material down whilst spreading

Basically just drive slowly up and down the road a few times dragging a few sheets of reo wired together with the sprinkler wetting it all down as you go

  • Like 1
12 hours ago, niZmO_Man said:

$350 for a skid pan day at EC? WTF??
They used to be like <$100? We had track days at EC south and the full circuit for $350-odd WOOOWWWW COVID ruined us all.

lol let me guess 10c lollies used to cost 10c too! prices have moved on old timer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks, plan is to drain all fluid tomorrow and do smoke test to find out the leak.   Appreciate your help and want to understand how the system work. So cooling is achieved by the long loop not any rad? The diagram seems to suggest it connects to somewhere inside the cabin and I thought that is a cooler inside firewall. If you look at the diagram it seems to show it connects to something inside firewall. I tried chasing it but not easy unless I take loads off   i am confident pump is good as fluid goes in and it gets soft( steering) but as soon as I turn engine off , loads of bubble come to surface and overflow. When engine is on , fluid level is below minimum but when off it shoots off and thinking it is sucking air in. I suspect aluminium pipe may have a crack line or whole   smoke test with no fluid should be a good start and if needed will remove the pump   In addition, the one going under the engine bay is high pressure line and one directly connecting from pump to resorvoir is return/ low pressure?   finally I searched and suggestion is to use dexron 2 but that is discontinued so bought dexron 3 as all research suggest it is compatible and shouldn’t cause any issues/ blow seals. I bought two liter of dexron 3 motul atf
    • Don't worry about. Just don't try to drive hard enough to make boost and you'll be fine.
    • Yes. This has already been said. It is a loop of hardline in front of the radiator. Because.... the pump is on the LHS and the steering rack hydraulic connections are where they always are on a RHD steering rack....on the RHS. The high pressure line goes down under the engine, along the crossmember, like it does on all Skylines. Don't just throw expensive braided hoses/other kits at it. Work out what is wrong and fix that.
    • Still got the afm on the intake, clamps are shut tight, only loose hose is the one that goes from the j pipe towards the IACV, since it's next to impossible to find a factory hose and the barbs are different sizes (I'm still using clamps on this hose to try and help it seal on the iacv side) I've ordered parts to make up the hotside of the intercooler pipes, I'll plumb it in and see what happens in a few days I suppose The turbo's internally gated, can I just unscrew the tension rod to let the gate open?
    • Did this ever go further ? Would love some updated info 
×
×
  • Create New...