Jump to content
SAU Community

Recommended Posts

Hey everyone!! 

I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings.
It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L)

My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick? 

I've checked images of some of the genuine dipsticks, but none of them have the length in it.

https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB

However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him.

Thanks in advance 🙏🏾 

Edited by DraftySquash
Link to comment
https://www.sau.com.au/forums/topic/486033-rb25det-engine-oil-dipstick-length/
Share on other sites

3 hours ago, DraftySquash said:

Hey everyone!! 

I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings.
It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L)

My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick? 

I've checked images of some of the genuine dipsticks, but none of them have the length in it.

https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB

However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him.

Thanks in advance 🙏🏾 

AA000 is for R34 GTT. 11140-05002 is not a part number that exists in Nissan's parts catalog. R33 GTST is 11140-21U00. 11140-05U02 is for the RB26.

On 4/1/2025 at 6:46 PM, GTSBoy said:

405mm from the underside of the flange to the tip. I will have photos soon.

Mine is in a Neo, is AA000.

Thanks a lot for this @GTSBoy

Mine is a NEO too so this is a good reference. It’s just weird because I’m putting in 4L and it already reaches the H mark 

Must be for the car’s lucky charm 🤷🏽‍♂️

She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 

Edited by DraftySquash
Typo
18 hours ago, DraftySquash said:

Must be for the car’s lucky charm 🤷🏽‍♂️

She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 

You can try shoving a borescope down there to see what's up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's a thread over on PF.com where this has already been beaten to death. I make this point only because the report that you're referring to is already out of date. They have walked back some of the silliness, including the need to apply for (and risk losing the application fee, if not granted) a permit to work on your own car on your own land. But there is still a lot of silliness left remaining. Victoria is a f**king shithole. Has been since way before we started calling it Brackistan. f**king nimby woke Stalinist nightmare of a place.
    • I’ll go last point, For me it’s, can I do better relying on the expertise of u experts in the field but my point was, is there a way and a will to sticky important tried/true/tested facts that come out of a question relating to each area of improvement. I mean like not losing valuable info when u end up relying on google without success. Some times. I just see so much knowledge being passed but unless u are a guru or lucky, the diamonds end up hidden in our forum sorry guys I’ll leave it at that respect 
    • Oh, and despite all the links, there's nothing sponsored here. Paid in full by me. 
    • What the actual f**k is this about?  https://www.carexpert.com.au/car-news/this-australian-city-wants-to-charge-people-to-work-on-their-cars A $400+ permit, every 3 months, to work on your own car?  Tell him he's dreaming. 
    • I did a bit of googling, the color MCM used was Galaxy Grey from House of Kolor. This is actually a colour I picked out about ~10+ years ago (or more). This one is a stock BMW colour, I guess over the years I figured it was smart to get an OEM colour that was pretty common for all of those sensible reasons one can think of..
×
×
  • Create New...