Jump to content
SAU Community

Recommended Posts

Hello,

I brought the door corner piece awhile ago and trying to gain enough courage to try and replace it.

Has anyone on SAU replaced the door corner piece on there car or pulled apart there door/glass and have any tips? Or a detailed door diagram of sorts?

1200x900_H0220_22U00_R33FrontWindowDoorPiece_RH_Z1_2.thumb.webp.8a5c82b3d7f5c5d05fd3c93a16f800b9.webp1200x900_H0220_22U00_R33_FrontWindowDoorCornerPiece_RH_Z1HQ_1.thumb.webp.fbdde80dfe54a2e87b4b526fa5cd7fa9.webp

Only thing online I've found is https://minkara.carview.co.jp/userid/3313874/car/3031793/6435436/note.aspx

I haven't replaced that, but I have had the doors apart on the r32 a couple of times

The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out

Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on

  • Like 1

Oh yes done this when the window started flopping around. 

Turns out the guides that run along the rail chanel had crumbed way.

Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top.

As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole.

All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window.

To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! ! 

10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T !

My love for Skylines knows no bounds !

  • Like 2
14 hours ago, dyl33 said:

Hello,

I brought the door corner piece awhile ago and trying to gain enough courage to try and replace it.

Has anyone on SAU replaced the door corner piece on there car or pulled apart there door/glass and have any tips? Or a detailed door diagram of sorts?

1200x900_H0220_22U00_R33FrontWindowDoorPiece_RH_Z1_2.thumb.webp.8a5c82b3d7f5c5d05fd3c93a16f800b9.webp1200x900_H0220_22U00_R33_FrontWindowDoorCornerPiece_RH_Z1HQ_1.thumb.webp.fbdde80dfe54a2e87b4b526fa5cd7fa9.webp

Only thing online I've found is https://minkara.carview.co.jp/userid/3313874/car/3031793/6435436/note.aspx

This piece is obscenely discontinued. I honestly hate the frameless window design because the rubber gets stressed and the guides as well every time you open and close the door.

  • Like 1

Ok, thanks, legends. I'm hoping I don't need to pull out the window regulator. I was thinking when the window is out, the regulator mechanism shouldn't interfere with the corner piece and then be able to be removed through the speaker hole. Fit the new corner piece and then refit the window, and Bob will still be our uncle.

images.thumb.jpeg.c34ed3c4aa8cd6c03aaa7cb4fb8db638.jpeg

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome. Dont let anyone dissuade you from your dreams. If you want a gtr, keep sabing and you will eventually get one. I feel like if I had have bought stocks, those companies would have gone bust and I would have lost my money.  There's a gamble in everything we buy. I've had good times and bad. But... I've also met my absolute best friend through this network and can't imagine life without them(more like a brother). Keep in mind, some specific mods will change as technology gets better. If you feel like general chat, there's always the wasteland.....
    • Those are some very cutesy barriers! Is that common?
    • Saw this abandoned Honda Fit in a carpark that was getting repaved... they just 'cut around it' and continued with the job! There's a number of reasons why the car could have been abandoned, but as for the construction company, legally they don't have permission to move the car from the owner (who has moved on and can't be contacted) so all they can do it just leave it there with enough space around it so it won't get damaged. 
    • You’ll want to have the block drilled and tapped to suit 1/2in head studs and the head for the same. How much power do you intend to make?
    • Sorry for resurrecting an oldish thread Not much has happened in the past year since the last update. The car did another 1000 miles or so and failed the MOT for the first time in October (failed on tyres which had been advised for a couple of years) In October the car got put up for sale and was removed in November due to no interest, being so close to christmas it was to be expected. The roads were dry in February so I decided to tax it early and get the new tyres fitted.   Fast forward to April, I got someone in to give the car a good clean after sitting for the winter.                                 The car got re-advertised and today (Saturday 3rd May) the car sold. The new owner is planning a GTR conversion at some point and a respray in the same pearl white. It's bitter sweet, it's a shame to have the car sit there for half the year and then only do 1000 miles. The kids are growing too quick and space in the back is getting limited. It's been a great 6.5 years of ownership
×
×
  • Create New...