Jump to content
SAU Community

Recommended Posts

At $80 a pop they seem very cheap, my questions are (as their website does not stipulate)

On these days is there timing equiptment or not?

Do any of you guys ever attend them?

What kind of track time do you get, etc?

Can you have passengers?

Could i run full slicks on my car?

Thanks

Evan

1) no timing equipment, got to do your own.

2) yes.

3) mm..can't remember..1"15'? maybe? (never clock myself..)

4) yes, but he also need to sign the paper, but no need the wakefield license.

5) yes..some people bring their slicks.

hope this help..

On these days is there timing equiptment or not?

No, bring a stopwatch and a mate

Do any of you guys ever attend them?

As much as possible

What kind of track time do you get, etc?

Depends on numbers and types or cars.

The first open day I ever went to there were about 15 of us and all street cars so they left the track open all day to everyone and we just went out whenever we wanted and for as long as we wanted

The last one there were race cars there as well so they split the road cars from the race cars into 20 minute sessions each. The numbers then got so high they decided to split the road car car's into 2 20 minute sessions each.

but generally you'll get ALOT of track time

Can you have passengers?

Yes but they will need a helmet, they'll need to sign the form and they WILL need a Wakefield Lience

Could i run full slicks on my car?

Sure, just not on the drive to and from the track :(

On these days is there timing equiptment or not?

Ive already got mine...

http://www.skylinesaustralia.com/forums/sh...ead.php?t=46212

If you can go mid week, the place is a ghost town and you can often drive around until you think your cars had enough :(

Trackdays in general are fairly busy until about 1:30pm where cars start to retire (break down), people start watching instead of participating and others go home early (the same can be said with drag racing at WSID).

Wakefield is a fantastic track to learn on. My lap times went from 1:35sec -> 1:21sec on my first outing and I was barely pushing the car (more so pushing myself to trust the car). I think with some semis-slicks and another 50 laps of practice (my car did close to 90 laps on my first time at Wakefield) that I could be down into the 1:15's :(

You guys are awesome thanks for the replies.

I cant wait to get out there and have a go

If you are going to go down some time mid week in September then let me know, i have soem time owing and am driving back to Sydney, liek the idea of dropping in at Wakefield on the way back from Melb..im looking at Thursday 9th, then the UAS day at Oran Park on the 12th :(

You guys are awesome thanks for the replies.

I cant wait to get out there and have a go

If you are going to go down some time mid week in September then let me know, i have soem time owing and am driving back to Sydney, liek the idea of dropping in at Wakefield on the way back from Melb..im looking at Thursday 9th, then the UAS day at Oran Park on the 12th :( ...nothing concrete but that is my intention pending work committments

Yeah Oran Park is probably the most challenging to come to grips with at first, the last 2 corners seem intimidating when you first try

The 2nd last corner is flat over a blind crest into the left hander....all you can see is paddock in fornt of you, its pretty frightening at first. But once you know where the track goes its easy to remember it always goes the same way :(

And the last turn looks intimidating at first with the wall so close, but unless you are *really* pushing you won't come anywhere near it. I've scraped it a few times in the race car, but only when I'm absolutely flat out during a race...and as they say, the closer you are when you hit it, the less it hurts...

Roy,

Sounds good to me and that date looks good as well, I will see what my mate says.

We will probably take:

Towcar + trailer + his car

and my car

just in case something goes wrong down there so if we do go there is some insurance for you.

He has the trailer/tow car so I will just have to clear the date with him.

My first track experience, cant wait

Evan

I might look at doing this moto concepts one now I'm not sure, but definately want to try wakefield. My mate is very keen on me joining the club his family is in "southern sports car club" and doing sprints, etc. Good thing about this would be that his dad is a mechanic and would help me out.

All i know is I keep speeding on the street (makes me feel guilty and generally shit), I really need to take it to the track.

Evan

I definitely suggest going to Wakefield a few times before tackling Eastern Creek.

Get used to picking racing lines and learn how your car handles at the limit. Wakefield is basically a racetrack in a big dirt field... It's short and tight, and really tests skills. If you stuff up, there's literally nothing to hit, so you just turn your car around, dust yourself off and go at it again... Great learning curve at Wakefield.

Eastern Creek however is a very high speed track. With speeds of upto 260km/h+ down the main straight, and corner speeds of 180-190km/h, if you stuff up (which you're bound to do when you're still learning how to drive on the racetrack), the results can be quite ugly.

Flashbacks of R33 GTRs running off the track at 200km/h and having a tea party with a wall and Porsche's spinning out and saying hello to concrete walls at Turn 12... :)

eeeek.

Thanks for the advice, if I was to go I wouldnt be alone I would be with a mate who has driven

oran, wakefield, ec many times, he tells me that in his opinion oran park is one of the hardest tracks.

I will ask him and his dad and see what they say.

top advice thanks Merli :)

Evan

  • 2 weeks later...

Roy, will you be stopping in at wakefield on the 9th september? Hopefully if the cars done (its in getting fuel system done at the moment) I should be down there on the 9th for my first track outing. Would be good meeting up with some people off here... still interested in coming down Merli?

Fingers crossed Ewen/Aurora will have his car back on the road and come along too.

Hey Amaru, there's an Eastern Creek day on 9 Sept as well, I think the sydneysiders are going to that instead.....

http://www.skylinesaustralia.com/forums/sh...ead.php?t=48480

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
    • 255 can't go wrong with the price.
    • When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...