Jump to content
SAU Community

Recommended Posts

Hi all

I've purchased an 'RB25DET' through my mechanic and when it cam in he informed me it was a 'Series II RB25DET'

He said they would produce more more power then a Series I

I was just wandering how much more? And what differences does it have over a series I motor to make it better?

Thank you in advance.

Link to comment
https://www.sau.com.au/forums/topic/48820-series-ii-motor-vs-series-i/
Share on other sites

there is no difference between the series I and series II motors.

There are some differences outside the motors:

Different coil packs and ignitors

Different ECU from 95 onwards

Different Turbo in series 2, spools up more quickly.

Are you sure about ur mechanic?

Just the stock ECU is a little more intelligent.. it also has direct fire ignition coils rather than an ignitor pack. I don't think actually makes it any better though(??) just the coils are more expensive per piece. By the time you throw out the stock ECU and turbo it matters little.

Otherwise as far as I know, a s2 WILL NOT make any more power... as the basic engine block, pistons, cams, rod are exactly the same. The later s2 turbos are meant to be different exhaust wheel but again that doesn't make much difference in terms of power or anything like that.

Its an interesting one though. Maybe somebody out there can be more specific...

Also likely that a series1 RB25DET is more likely to be older and worn compared to a newer rb25det. Newer engines generally make better power just because of the km and age.

P.S. and SNAP with Duncan :)

lol pred

Well John knows his stuff so he must have been talking about one of those differences. Did you ask him about the specific thing which makes it better? I reckon the one thing that would make a real difference is the younger engine, prolly lower klm, so prolly better compression, so prolly more power...

There's some disagreement about whether the SII turbo is "better", its got a plastic wheel instead of steel and some people think that means it will last less time with extra boost.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...