Jump to content
SAU Community

FS: Nismo Group A spec GT-R Turbos

VSPEC32
 Share

Recommended Posts

VSPEC32 Proficient

VSPEC32

Posted
Posted

Turbos sold, thanks to those interested.

These turbos have been fully rebuilt by Per4manz Turbochargers (Perth, WA) and are ready for delivery. They will come with a 3 month warranty from Per4manz.

Turbos use a 14411-06U00 Nismo T04B/T25 core with 0.60 A/R Compressor and 0.64 Turbine housings. At 1.0bar of boost power was much greater than stock and at 1.2bar, performance was great.

According to Zoom No. 78 (Twin-turbo special), this setup of 0.60 A/R compressor and 0.64 Turbine housing as a Group A spec turbo, being bigger than N1 turbochargers. Stock and N1 units use a 0.48 turbine housing. Each turbo is said to support 300hp which is close to 30lb/min airflow.

Exhaust housings have been ceramically heat coated inside and outside by Competition Coatings.

Core Plate:

VJ 02580

14411-06U00

466089-1

Exhaust:

.64 696-2 T695

Compressor:

.60 M24

Price: $2600

Turbo's currently located in Perth, please PM me if there are any other questions or you'd like to purchase. Shipping the responsibility of the buyer. Direct Debit preferred method of payment. Can provide references for other people who've bought off of me.

Cheers

Brendan

PS> There were originally for sale under this post:

http://www.skylinesaustralia.com/forums/sh...ead.php?t=46277

Ad also posted in the new 'classifieds' section:

http://www.skylinesaustralia.com/classifie...t.php?product=9

Photos below were taken prior to rebuild.

Link to comment
https://www.sau.com.au/forums/topic/49008-fs-nismo-group-a-spec-gt-r-turbos/
Share on other sites
VSPEC32 Proficient

VSPEC32

Posted
  • Author
Posted

Turbos are in the process of being rebuilt and will be available from the 1-SEPT-2004. Turbos will come with a 3mth warranty from Per4manz Turbochargers.

VSPEC32 Proficient

VSPEC32

Posted
  • Author
Posted

Turbos are in the process of being rebuilt and will be available from the 1-SEPT-2004. Turbos will come with a 3mth warranty from Per4manz Turbochargers.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      Just a follow-up on this topic. From what I can tell so far the rusty residue on the engine block might be unrelated to a coolant leak or maybe just older than anticipated. After driving it from the winter garage to my friend's garage I could not see any new traces of coolant leaking there, but I will test this properly once I was able to fully warm up the car and drive it for a bit. I think I can agree that the whole porous engine block stuff is kind of nonsense, but there is just a silly amount of true, false and half-true information on anything Skyline-related on the internet.
    • Butters
      UniClutch

      By Butters · Posted

      hrmmm , not mine , easter plans to pull engine not happening     
    • DRoc81
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By DRoc81 · Posted

      I removed the IACV, cleaned it and reinstalled.  I found a video on youtube that helped with the whole process, the guy then said the idle needed to be set, so the process was to get the vehicle up to operating temperature, unplug the TPS, set the idle screw in the IACV so the RPMs were around 600, then plug the TPS back in.  After I reinstalled the IACV, the car started (because, it was a cold start), once it warmed up, the car died, I adjusted the idle screw to see if that helped anything, it did not, I had to wait about 3-5 minutes, then the car would start back up. Only to shortly cut out, and only crank.  I loosened the TPS to see if adjusting that would do anything, and when I would rotate the sensor clockwise, there was a humming noise, but it would go away when I got the sensor in the horizontal position.  It only made the hum noise with the key on.  What do you guys think? 20250414_172604.mp4
    • Milkmun
      Magnetic Drain Plug Snapped in Half

      By Milkmun · Posted

      At least it was the ex.
    • Murray_Calavera
      Troubleshooting - motor wont turn over

      By Murray_Calavera · Posted

      Quick update.  The engine grounding strap was replaced, the engine is now happily running.  Tested the voltage drop before replacing the strap, was about 1.2ish volts down between engine to battery, chassis to battery. With the new grounding strap, pretty much no voltage drop at all. 
×
×
  • Create New...