Jump to content
SAU Community

Workshops to do rb25 swap r32

someonestolecc
 Share

Recommended Posts

someonestolecc Grand Master

someonestolecc

Posted
Posted

Gday,

I know this has been done before (I"ve searched and read). But I'm after recommendations of either people from these forums who work in a shop, or have got this done by one.

I'm looking into getting a r32 auto and swapping with rb25det and manual conversion with the rb25det matched gearbox. Either that or buying a manual rb20det and then doing engine conversion.

Anyone have any recommendations? And also price estimates?

Would I be looking at $5000 ish or $10,000ish ?

This is not including computer or tuning. Just engine and gearbox swap. Also this does not include diff (I'm assuming you need a stronger one if you wanna do bulletproof driveline).

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/49069-workshops-to-do-rb25-swap-r32/
Share on other sites
someonestolecc Grand Master

someonestolecc

Posted
  • Author
Posted

Thanks texas :P

Have you dealt with these guys?

I've also heard of autostyle and unique auto sports but i prefer to give my business to some nice guys who CARE and are enthusiasts.. HOT4s garages (in my mind) seem a bit more into the money side of cars :(

T0nyGTSt Grand Master

T0nyGTSt

Posted
Posted

I have had a number of cars done with Fred and Brett and honestly, you'll not find a pair of fairer or more honest people.

Autostyle - I will not comment, just that people here have some strong feelings about them.

UAS are fine but they are not in the conversion field.

For this kind of work, it's best to talk to people who know how to do conversions.

T.

predator Grand Master

predator

Posted
Posted

Either way unless you are very careful you may get taken for a ride..

To be honest trying to tackle it yourself is an option compared to some stories and prices I have seen from workshops.. You can fug up a hell of a lot of things, but at least its in your own time and not your money. Many times a workshop will make much the same mistakes as you might, but they'd be charging you for *their* mistakes and research time. Some places would charge you $10,000 for that sort of conversion.

Unless the workshop has definitely done a couple of the exact conversions, can quote you a fairly firm price (based on the other conversions) and you can see the results for yourself.. I'd be just doing it yourself.

As you can tell I don't have much faith in mechanics these days :P

T0nyGTSt Grand Master

T0nyGTSt

Posted
Posted

The tricky part is getting the RB25 ECU to work with the R32 instruments and aircon etc.

Not rocket science but you definitely want someone who has done it before and isn't 'experimenting' with your car and money.

That's why I recommend someone who's done it to his own car.

T.

Dahtone Racing Grand Master

Dahtone Racing

Posted
Posted

my mechanic can and has done it before we were going to do it to my car but we found an RB26 for a good price.

he does jobs like that in a weekend, drop it off friday night pick up sunday arvo, so its not as hard as it sounds.

PFC wont make it easier weith the wiring because it still has to be the standard loom.

predator Grand Master

predator

Posted
Posted

You're best off dropping the engine in if at all possible yourself.. getting everything hooked up.. then calling up an auto-elec familiar with RB's to sort the wiring.

The wiring is the messy part, but any workshop will probably just call in an auto-elec at the end anyhow.

  • 3 years later...
BigC1988 Enthusiast

BigC1988

Posted
Posted

I just got my RB25DET (series 2) and I was hoping you could help me with some questions.

My Skyline is non turbo so it will be a big step with the RB25.

Now then, my first question is about the gearbox mounts, I hear they aren't the same and I will also have problems with the speedo meter. What do you know about this? Can I use the Xmember of the R33 ??

The second is about the harness, everyone that has ever swapped an engine told me that the harness is the most difficult part of the swap. Do you have the diagram of the R32 and the R33 (still can't find it for the R32) and some pointers on how this is done??

Hope to get a reply from you soon

Carlos Rudolph

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Strangely I noticed it either disappear later in the day, or not be present. I definitely noticed when I was crawling around that open wheel thingy entering the pits (that part was audible in car). Driving home and commuting around town for example, I didn't hear it. It's plausible that it was a brake disc or something still slightly in contact. The brakes absolutely felt BAD for the first couple of sessions, huge amounts of shudder and grinding as they got up to temp - And then I actually just forgot about it as the day went on/didn't notice it. The videos were from the morning when this was more present than the afternoon/drive home when it wasn't. I've asked around and got a variety of responses including handbrake shoe contacting hub, CV joints, CB tailshaft bearing as above, and clutch input bearing. I didn't test if it disappeared when clutch was in. I haven't noticed it in any of the other videos nor did I notice it when driving to that extent. More or less hoping the microphone at the rear license plate giving some kind of clue of 'something' but it looks like "spin stuff and see if you can notice it" is the way forward here. I could be smart and use the gopro mic and re-mount it to that location to see if the sound is still present at low speed actually. Sounds like a decent test whenver I have the CBF'ness to drive the car again. Given it's almost 40C for the day of the track day and the next 3 days after, the CBF is high. All I've done since getting home is unpack the car, remove the remnants of the lip and undertray and left it there. I was surprised how well the PMU Club Racers actually worked. The brake performance on the track was absolutely fantastic, best I've ever personally used, no fade whatsoever and the bitiness was almost too good, I was scrubbing more speed off than I needed to, but I also ended up infield when I started trying to scrape off ... less speed.... so...
    • GTSBoy
      R34 GTT idle problem

      By GTSBoy · Posted

      Not really, no. Anything you would do is easily reversible.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      I would like more noise related info for my truly uneducated guess  Does it do it at idle or when revving, clutch engaged, and disengaged? Does it only do it when the car is moving? I've heard "similar" noises from a clutch pack that left the chat room, and CV joints that have chewed themselves out But as Matt said, how's the yokes, tailshaft and centre bearing going after their last little issue Fingers crossed it is something simple  Weird noises make me cringe 
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      One other question, is there a chance that changing the idle speed can lead you down a rabbit hole and is the reason the tuner didn't touch it? Reason I ask is because if that's the reason the tuner avoided it then I probably shouldn't be touching it lol.
    • GTSBoy
      Cleaning my wheels 😍

      By GTSBoy · Posted

      Pfft. As if I'd ever point a high pressure washer at my car.
×
×
  • Create New...