Jump to content
SAU Community

RB20DET stroker engines

Wishin

By Wishin,
in General Automotive Discussion

 Share

Recommended Posts

Wishin Explorer

Wishin

Posted
Posted

Has anyone done any decent research on this?

Urban legend says that RB25 crank and rods can be used to create a "stroker" RB23DET. Seeing as there's only 2mm in the stroke between an RB20 and RB25, this does not sound logical.

Besides I figure that, if it was easy, wouldn't everyone be doing it??

Please enlighten me... :)

Matt

Link to comment
https://www.sau.com.au/forums/topic/49647-rb20det-stroker-engines/
Share on other sites
JH32 Grand Master

JH32

Posted
Posted

go to meggalas website there's info there

also HPI mag is currently doing an RB24 build up

also search in the technical forums ... there's heaps of info there too

but yeah apparently rb25 rods and crank gives 2.3L and rb26 rods and crank gives 2.4L

drifto Collaborator

drifto

Posted
Posted

Only need to go to the next oversize pistons with RB26 rods to get 2.4

I'm not going ahead with mine anymore, so if anyones interested there's a complete second hand RB20 for sale with a set GTR rods and crank in Canberra. I've also got the stock turbo!

PM me!

But it's hard to justify the rebuild in a GTS with the price of GTR's at the moment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      First/Second Post

      By Duncan · Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • Dose Pipe Sutututu
      WTB R32 GTR Window glass stabilisers

      By Dose Pipe Sutututu · Posted

      yeah, there's a country that recently started importing Skylines, I blame them.
×
×
  • Create New...