Jump to content
SAU Community

Recommended Posts

Oh, just to add fuel to a near extinguished fire from earlier...

The Aussie R31 is often lighter than all but the most poverty specced jap ones.

My s3 GX sedan weighs in at 1280kg - wow, heavy..........

  • Replies 198
  • Created
  • Last Reply

Top Posters In This Topic

That's very interesting, as it's 40kg lighter than the factory minimum spec.

Thats what she weighs, checked more than once. I would imagine the factory weight is as cazz said, and probably for the most optioned, heaviest version.

Its been discussed before, but I think a stripped (ie for the track) 4 door aussie 31, based on a GX, with no aircon, no power steer and an SR20DET transplant would go close to 1100kg, maybe even under...

Thats what she weighs, checked more than once.  I would imagine the factory weight is as cazz said, and probably for the most optioned, heaviest version....

You may be correct, but the training manual says GX 1320M/1340A, GXE 1330M/1350A, Ti 1420, SE 1395M/1415A

makes you wonder what our hr30's would weigh in at once stripped, its great knowing they start at 1150kg :wassup: , i'm looking forward to driving the hr30 on a more everyday basis but i love my r31 4door aus spec beast.... :D

Since the R31 forums are down I will post here :D

I installed Koni's into the rear the other week and it made the ride so stiff.Yesterday i put the fronts in and they are Z31 inserts(yellow not red) put in mport R31 struts with Oz r31 tops.

These are adjustable from the top by turning the knob and make it go from stiff to rock hard stiff :).It feels like a race car on the roads and goes around corners like a demon.

yeah.. i have an early r31 gx.. and it feels and handles a fair bit lighter than 1380kg. I've driven a few cars, you can feel the difference usually. One day if i can find a weighbridge I'd give a try. Even my spare bloody weighs 20kg!

Working on the handling for an r31 would be one I'd love to do as I really think their handling is a little underrated. With a few upgrades I'm sure they would not be far behind many of the imports.

Unfortunately just don't have the money to throw at it :D When the springs go (I think they may have already!) I might go for some whiteline springs. They're cheap, should make a difference.

Got a nice shot of my car on the trip back from melb.. looked great that low at the back, wish it was that low all the time.. pity it was only coz of a gearbox in the back and said stuffed springs :)

1332r31champion.jpg

  • 4 weeks later...

Got my Ti back turbo converted toady w00t. Very nice, will have the FMIC and piping done in the next month or so, will keep you posted for those who care. Its a nice little sleeper with the quietest 3" exhaust your eva gonna hear on a turbo car. Can't wait to have my first traffic light drag and impress someone who thinks its just an old farts Franco Cozzo Ti.

Good aye might be a bit late on the scene

1987 Silhoutte 5spd. 16'7s and 16'8s.

Is all standard bar a cd player.

Just doing the suspension now, Nolethane bushes, Noltec adjustable strut tops, Whiteline 27mm swaybar, Not sure if i will buy there strut brace yet or get our local car guru to make one up. Custom 350lb front springs with kyb shocks and 220lb rears with Biltens out of GTS2. old but better than standard shocks. Should sit about 40mm at the front and 55mm lower at the rear.

Just using DBA slotted disc, with a bendix advance at present (because it's cheap and still works well)

I am picking all my rb30 turbo bits on friday Arvo, but i have decided to sell them straight away as the cash is needed more than the motor. So if any one wants a complete conversion Rb30e to Rb30et, with front mount, blow off valve, all piping to suit, manual ecu. Do have the turbo block as well but it needs pistons as it has cracked one. No bore damage. http://forum.r31skylineclub.com/index.php?...p?topic=19967.0.

  • 9 years later...

RESURECTED FROM THE DEAD: I know this is a old post but through to much research and searching and having no luck I thought id give it a try.

75degrees sideways if your still around (hopefully) ive been chasing down that factory blue for the 31's ive been told it was a rare colour or is a rare colour to find these days I forget. ive heard mixed storys of it being a special optional extra on the ti ive heard others saying it was a optional extra on all 31's. well what im hoping is 1) you can clear this up for me and 2) you can get the name and paint code off the car fr me.

I have a younger disabled brother and hes really into cars, he used to love going for drives in my old 31 before it was stolen and destroyed, and theres a local 31 in that colour and hes always looking at it and saying how cool it looks and how he loves the colour.

so im building a 31 with him to build confidence and teach him abit about cars and I really wanna respray it in that blue be a real treat for him as the 31's were looking at are either silver brown or white so if I get it and then when hes away for a weekend or at school take it and have it resprayed to be home under a car cover to surprise him.

so if anyone can help on the colour and paint code of the blue car posted above it will be highly appreciated

RESURECTED FROM THE DEAD: I know this is a old post but through to much research and searching and having no luck I thought id give it a try.

75degrees sideways if your still around (hopefully) ive been chasing down that factory blue for the 31's ive been told it was a rare colour or is a rare colour to find these days I forget. ive heard mixed storys of it being a special optional extra on the ti ive heard others saying it was a optional extra on all 31's. well what im hoping is 1) you can clear this up for me and 2) you can get the name and paint code off the car fr me.

I have a younger disabled brother and hes really into cars, he used to love going for drives in my old 31 before it was stolen and destroyed, and theres a local 31 in that colour and hes always looking at it and saying how cool it looks and how he loves the colour.

so im building a 31 with him to build confidence and teach him abit about cars and I really wanna respray it in that blue be a real treat for him as the 31's were looking at are either silver brown or white so if I get it and then when hes away for a weekend or at school take it and have it resprayed to be home under a car cover to surprise him.

so if anyone can help on the colour and paint code of the blue car posted above it will be highly appreciated

Are you talking about Pacific glow (light blue - exec, gxe) or Midnight glow (dark blue on Ti and silos)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 2 spots that my exhaust guy joined the 2 pipes together  Made a big difference. I'm now able to live with it. I can make it louder if I want by removing the HKS caps.
    • Hi all, considering clutch upgrade to support 1130 engine hp from 1650cc injectors on e50 at 85% duty cycle (1650 x (11.85/14.7) x 85%). Narrows down to these three as they can be converted to use gm 26 spline input shaft if I ever want to use transmission with that input shaft (orc1000f and r3c easy/cheap just change center hub; tr2cd pricier must change clutch discs). Pricing orc1000f similar to tr2cd, r3c about usd 200 pricier. Orc1000f triple plate 200mm. Tr2cd twin plate 215mm. R3c triple plate 215mm. Claimed max torque : orc 1000f 723 lbs ft; tr2cd 800 lbs ft; r3c 1100 lbs ft. Why orc1000f triple plate but claims lower max torque vs tr2cd twins? Is orc1000f underrated? Any info maxing out these clutches? Info on street/traffic driveability/pedal feel? Thank you for any info on them.
    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
×
×
  • Create New...