Jump to content
SAU Community

Recommended Posts

Hiya All - Due a clip holding a hose to my oil cooler failing, I've now got a a broke engine. I'm trying to decide wether it'd be cheaper to rebuild it (quoted $10,000 AUS by 4 very well known UK Tuners) or put in a RB26.

Has anyone changed the engine on a GTT for a RB26 over here?

I'm assuming the Loom and ECU would have to be swapped as well but else (cooling pipes, intercooler piping, anything I've left out etc)

Cheers......................................................IAnH

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/
Share on other sites

I have a simple suggest after driving all the previous model skylines fitted with rb26's .

even if it cost you a little more for the conversion. do it no ifs no buts. :P

I see buy your sig you like a fast cars and probably will go faster then this is your asnwer you will have 400 hp from a stock rb 26 and 5 and 600 hp is very doable on an unopened motor. if you had driven a gtst with an rb 26 you wouldnt be asking this question. its a great package well worth any teething issues.

meggala

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992460
Share on other sites

Hiya Meggala - I was going to sell my GTT for a 550+hp R32GTR so now I've got the option of dropping a similar powered GTR engine into my GTT I might keep it.

Cheers.......................................................IAnH

(ps Your website has been a constant source of helpful info, Top Job Fella!)

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992488
Share on other sites

duncan I prefer the rb26 for many reasons.

just to name a few sodium filled valves solid lifters ability to handel 500 600 hp. great power delivery great note, revability. good oil system a proven package.If tuned properly the rb26 will prov a great package I have never heard of any one doing the rb30 det conversion who had to pay for labour etc coming out under 10 k with 500 hp. if you drive an rb 26 equped r33 or r32 you will have a grin from ear to ear and such great drive ability and power deliver you will see

meggala

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992508
Share on other sites

duncan I prefer the rb26  for many reasons.

just to name a few sodium filled valves solid lifters ability to handel 500 600 hp. great power delivery great note, revability. good oil system a proven package.If tuned properly the rb26 will prov a great package I have never heard of any one doing the rb30 det conversion who had to pay for labour etc coming out under 10 k with 500 hp. if you drive an rb 26 equped r33 or r32 you will have a grin from ear to ear and such great drive ability and power deliver you will see

meggala

So many different schools of thought. Do many people walk away with much change from 10k after putting a std RB26 in their car?

I have a car with no engine, i need to make a decision, i want an RB20 so i can give a certain SR20 a run, but ill happily swallow my pride if it means saving me money and going quicker :uhh:

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992516
Share on other sites

but roy in your case I would even think about an rb 25 and whack on your turbo set up )

250 rwk + is very achiveable there

meggala

NO!... LOL I couldnt turn my back on the RB20 for the RB25. That would be like sleeping with your mates wife. With the RB26 at least she is a supermodel and ppl may understand my treachery :whip:

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992534
Share on other sites

I pondered the same conversion - RB26 into R34 GT. However, just the sheer pain of finding a late model RB26 to me made the conversion a dream. Even finding a late model RB25 NEO was impossible (outside of a Stagea which I eventually ended up with).

Either that or I'm just looking in the wrong places!!

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992584
Share on other sites

Hiya Dan - It'll physically fit but the hassle will be the ECU, Loom, Sensors and Wiring.

I was already making 350hp on a Dynapak (at the hubs) on stock internals but if I supply a GTR engine and let the tuner keep my GTT engine he'll fit it for free (it'll be the 1st GTR/GTT in the UK so it'll be used for some advertising I expect!)

I'm expecting around 350-400hp again at 1bar but it depends on the turbos I get (hopefully re-built stock ones with metal blades!) as I'd like to run at 1.2bar again.

I'll have to get a new downpipe and another AFM & Filter (probably new intake pipes for the 2 turbos too!)

When it's done I'll post it on here again.

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-995435
Share on other sites

Dude the R34 RB25 engines are worth a fair bit, considering they come with RB26 rods and solid buckets. Really there isn't much difference internally apart from the VVT. That rebuild figure you intitially got is bullshit too, get a 2nd quote from another source - like a machine shop. They won't triple the price because you have a late model expensive car like tuning shops do...

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-995956
Share on other sites

Personally I would do the RB31 (forged) bottom end, and with the RB25NEO top end it would be a real goer. We have a ~600 bhp RB26DETT and a ~600 BHP RB31DET and I can tell you the RB31DET is much much faster. The max power might be the same, but the average power from the RB31DET is much higher. I have never actually worked it out, but it would be a good 60-70rwkw from 4,000 rpm to 8,000 rpm.

My 20 cents worth. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-996009
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...