Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

I did this on a Dyno so nothing illegal here, 261KPH on the RSM and 260KPH is what the dyno machine read. Hit rev limiter at 7200rpm. Was pretty impressed with the accuracy of the RSM actually. But then again is doesnt take into account wind resistance, tire friction and of course the good old VIC police.

With the RB20 in R32 GSTS, 225 kph into the chase at Bathurst, no brakes or backing off just turn in and hang one. That's from a standing start at the dip on Conrod. Same at Eastern Creek into turn 1, gotta brake there as it was raining. With another 175 rwkw this year, I am looking for 265+ kph into the chase, woooohoo. :rofl:

Datsun 180B 1800cc twin Su's 170kph ran out of puff

Fiat 124cc 1800cc twin cam, twin sidedraught dellorto's 3 on board 190kmph ran out of revs at 7500

Falcon 3.9 injected no mufflers or cat, pod filter 3500 in fifth 200kph no more go

R32 GTS 200rwkw too many mods to list 7000rpm in 5th = @ 240 kph just starting to really pull, revs to 8500 theoretically 290 kmh possibly! lol

305km/h, 5th gear at 7000rpm.... couldn't take it to 8000rpm due to dyno top speed of 300 :D

sweet

Me, around 240 in the R33 and still had accellerating power, but no more road. And 250 in a 400SB chev v8 commodore with a 4 speed and tall diff, had more but ran out of gearing.

-rb25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
    • New rear lights, filler panel sprayed, cleaned and back together    before, during, after shots 😍
    • 100% is gyprock, I agree. Slip of the keyboard. Haha! I left my indicator bulbs out to save a bit of weight.
×
×
  • Create New...