shudder when braking?

[skyhigh!]

have a prob with my 32 gtst. there seems to be a shudder in the front when under heavy brakin, say going from 100 down to 60. any help would be appreciated.

[GTRman1992]

Discs may need machining.

[Roy]

have a prob with my 32 gtst.  there seems to be a shudder in the front when under heavy brakin, say going from 100 down to 60. any help would be appreciated.

Could be anything, best go see a susp place. It would suck to machine your discs only to find it was actually something else

[rs73]

Sounds like disc warp. get it machined, I did 7 months ago and it solved my problem.

It did come back again now but just a little bit, hardly noticeable. Could be wheel needs balancing again.

[skyhigh!]

Sounds like disc warp. get it machined, I did 7 months ago and it solved my problem.

It did come back again now but just a little bit, hardly noticeable. Could be wheel needs balancing again.

have had wheels balanced recently. did yours do the same thing- braking from 100 to 60. also another thing that happens is when braking at low speeds the front becomes "loose". always have to correct it. if that makes any sense.

[rs73]

what u mean loose? tram lining? then it may have been alignment issue in your car. best to visit a suspension workshop, get all ur wheels balanced, and front wheels aligned. also while rims r off, check the brakes perhaps have them machined as well.

[skyhigh!]

what u mean loose? tram lining? then it may have been alignment issue in your car. best to visit a suspension workshop, get all ur wheels balanced, and front wheels aligned. also while rims r off, check the brakes perhaps have them machined as well.

yeah i guess you could call it tram lining. . had new tyres put on and got em to do the whole lot, balance and allignment. but theres one more thing ive found. when i had the front on jacks ive been able to move the rim side to side. so if you were to put your hands at each side of the tyre and shake. theres not alot of movement, but i guessin that any movement isnt so good in this area.

[Zoix]

um, the rims/mags are they stock, do you have spacers to go on so the wheel is a tight fit? that might be your problem. Maybe repco or some tyre shop might sell them.

[skyhigh!]

aftermarket rims. had same prob once before was told it was lower control rm so igot it all fixed wit neoluthene bushes. went away but for some reason seems to of come back. couldn be the same thing again surely.

[clarkey]

Discs may need machining.

Yeah I agree. Machining the discs should fix the problem