Jump to content
SAU Community

Recommended Posts

Hi, I recently loss my licence on a drive home, got caught drink driving.

Don't really know how long it will be lost for, have to wait for court.

Anyway I've decided to sell my car, I don't need it for now. And plus I hardly drive it too. Here are the details

Subaru WRX 1998 model

- 2000 model update, so it looks like a 2000 model

- 68,000 kms

- Power indows/mirrors/steering

- A/C

- Colour: White

- JVC Mp3 head unit

- Twin-outlet muffler (aftermarket)

- Turbosmart Type-2 BOV (for release of excess boost pressure)

- Very good condition WRX

Rego is til next year 2005, May/June, something like that.

I can't think of anything else but the above mentioned, I keep this car as clean as possible most of the time. Its always hand washed at the car wash, serviced every 5000kms using Mobil 1 SuperSyn oil.

Price: I'm asking for $21,500 but I'm reasonable. And im in sydney.

If you are interested and have any further queries, you can contact me on 0404 613 438.

I'll post up a few pictures, if you want anymore pics just p.m me yeh?

Cool, thanks.

Link to comment
https://www.sau.com.au/forums/topic/50285-fs-wrx-1998-2000-update/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A little more work this week.  Fitted astra power steering pump in the boot with a lowe fabrication bracket. Gave the pump a good clean, fitted Anderson plug and high pressure fitting. With the intercooler being flipped under rad support factory headlights weren't going to work. Ordered a set of origin battle lights, they arrived so got them test fitted. Will require some fiddling to fit nice but was an easy quick option for now. And today we pulled out the manual Rb gearbox and test fitted a ZF 8HP50. It will fit with some casting tabs cut off and small tap of the tunnel with a hammer. Pick up the adapter plate Wednesday so hopefully all bolted in Friday and measure for tailshaft which will be a 2 piece. Been doing a lot of ecu, pdm and tcu loom design so when comes to wiring it in a few weeks will all go smoothly.
    • FYP. Sadly. Even bolt cutters wouldn't take 2 sec. But in the days of 18v angle grinders, nothing is safe.
    • One piece driveshaft I would recommend a dual CV setup otherwise stick to OEM. I have heard most one piece driveshafts cause excess vibration otherwise. The transmission grind I'm quite familiar with. You can try shockproof gear oil, otherwise you need a new transmission. The shifter is extremely simple on these cars. If you want pull apart the assembly and replace the plastic bushing but I doubt that fixes anything. The tail light issue is very common, unfortunately new tail lights are long discontinued. The trunk antenna going up always is because your radio doesn't have a true power antenna control, just remote amp power signal. There is a blank switch plate that you can pop out and install a switch for this or alternatively source a head unit that has proper antenna control. Throttle body sticking you have to disambiguate by disconnecting the cable and seeing if the linkages are the problem or something else. There is a procedure to adjust them, refreshing them is also somewhat involved if that's the issue. I have dealt with many of these issues. Old cars really are fractals of problems. The more you fix the more you discover there is to fix.
    • Welp, you've got a long list of experiences right there. I'd say you're on the right path.
    • That's correct, suits my requirements a bit better. Sure there are also numpties there, however it's generally a different vibe and more my kind of vibe.
×
×
  • Create New...