Jump to content
SAU Community

GFB Stealth FX


Recommended Posts

Guest darrinspencer

It is not on the Gold Coast but delivery is overnight

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi..._PcY_BIN_Stores

I have bought of them before with no worries

I have sent them a email to see if they will do a group buy price for 3 or more

I will let you know if it is cheaer than $440 plus delivery

I have seen the wholesale price on these and they are not much more then

$300-320 so there is a fair bit of makeup.

Link to comment
https://www.sau.com.au/forums/topic/50432-gfb-stealth-fx/#findComment-1004021
Share on other sites

the whole top peice which holds on the boost control line fell off

somewhere on the road. i had no idea it had come loose or was coming loose.

i had to fabricate up a peice for the top with some rubber seals to make it work again and a nut to hold it onto the main shaft. i only had it for 6-7 months and it fell apart. :mad::mad:

i have attached pics so you can see what i am talking about. i like the valve but i am not sure about the build quality. it is fantastic with the adjustability.

just a warning before you spend serious bucks... :(

Link to comment
https://www.sau.com.au/forums/topic/50432-gfb-stealth-fx/#findComment-1007176
Share on other sites

Guest neoGT-25
the whole top peice which holds on the boost control line fell off

somewhere on the road. i had no idea it had come loose or was coming loose.

i had to fabricate up a peice for the top with some rubber seals to make it work again and a nut to hold it onto the main shaft. i only had it for 6-7 months and it fell apart. :D  :)  

i have attached pics so you can see what i am talking about. i like the valve but i am not sure about the build quality. it is fantastic with the adjustability.

just a warning before you spend serious bucks... :D

dosent it have a warrenty or something?

Link to comment
https://www.sau.com.au/forums/topic/50432-gfb-stealth-fx/#findComment-1007606
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...