Jump to content
SAU Community

Recommended Posts

Ok - thought I'd put this in a new thread just to grap all of you interested parties attention.

Just recieved an email from Chris (event co-ordinator) that there has been some cancellations and they now have room for 8 more people to the HSV Day at Phillip Island on Sept 19th.

You guys still interested? I have to fax him the details of everyone that wants to participate by Friday morning.

Also - just to throw a spanner in the works - that weekend at Winton they are having an open weekend. The Saturday will be like the usual Fridays ($100 with 30min sessions between cars and bikes) and the Sunday will be another $20 Fun Day. No CAMS license required for anyone that wants to go to these days at Winton but you will need a helmet.

Link to comment
https://www.sau.com.au/forums/topic/50670-hsv-day-at-phillip-island-is-on/
Share on other sites

  • Replies 89
  • Created
  • Last Reply

Top Posters In This Topic

I'm keen to hit Philip Island, but I need to have front and rear anti-roll swaybars fitted and new semi-comp rubber =/ I've been spending too much money recently.. If the car isn't ready at the level I want it in time, I may go up to winton on Sunday for the fun day since I missed out on the last one.

I'm keen to hit Philip Island, but I need to have front and rear anti-roll swaybars fitted and new semi-comp rubber =/  I've been spending too much money recently..  If the car isn't ready at the level I want it in time, I may go up to winton on Sunday for the fun day since I missed out on the last one.

Rubbish :D You dont NEED new sway-bars, you have them std. You dont NEED semi comp rubber. Sure it would be nice to have them, but if you wait until everything is perfect onn your car, you will never, ever make it out there. Hell id be there if my car had an engine in it :Oops: ...even though i have a shopping list as long as my arm of things i want, as opposed to need.

You NEED to get out there and give it a flogg'n :( Std, tweaked or heavily modified it dont matter :headspin:

That's good advice, and you're absolutely right :D

I'll see how things go... I definately want to get out on the track in the 34. But judging from my cars handling on fast corners, I'd like to get my whiteline adjustable swaybars fitted.. also need new race pads & fluid.

Rubbish :(  You dont NEED new sway-bars, you have them std. You dont NEED semi comp rubber. Sure it would be nice to have them, but if you wait until everything is perfect onn your car, you will never, ever make it out there. Hell id be there if my car had an engine in it :Oops: ...even though i have a shopping list as long as my arm of things i want, as opposed to need.  

You NEED to get out there and give it a flogg'n :( Std, tweaked or heavily modified it dont matter :headspin:

I'm keen to hit Philip Island, but I need to have front and rear anti-roll swaybars fitted and new semi-comp rubber =/ I've been spending too much money recently.. If the car isn't ready at the level I want it in time, I may go up to winton on Sunday for the fun day since I missed out on the last one.
No way boy racer, Your car will be fine. I was eating other cars out there so trust me when I say your car is fine. If you've got any questions let me know.

EDIT : I also had stock pads and fluid.

That's good advice, and you're absolutely right :D  

I'll see how things go... I definately want to get out on the track in the 34. But judging from my cars handling on fast corners, I'd like to get my whiteline adjustable swaybars fitted.. also need new race pads & fluid.

You can get rb74 front, comp 2 rear pads and motul dot 5.1 fluid from racebrakes for just over $300 bucks. Mine are getting installed tomorrow by mate

You can get rb74 front, comp 2 rear pads and motul dot 5.1 fluid from racebrakes for just over $300 bucks. Mine are getting installed tomorrow by mate

Is that price from racebrakes directly? I'm also considering Formula Ferrodo pads for the front, they dont squeal as much as the Ferrodo 3000.

Is that price from racebrakes directly? I'm also considering Formula Ferrodo pads for the front, they dont squeal as much as the Ferrodo 3000.

Yes, when you go there say were were quotes $145 for the front pair and $132 for the comp 2's. I think ferrodo pads need to be warmed up a fair bit before they start to work, not fun on winter mornings driving to work.

The best ferodo comprimise pad is the ferodo 2500's. They are the stock pads on cars like the AMG mercs. Great track pad for your usual "sprint" sessions but may start to fade if you do an extended 8+ laps in one session.

The 3000 are farken noisey. But god damn they work good! :D

So far for the HSV day I have confirmed:

Snowman

Emre

Duncan

Skylinegeoff

Attached is the sup regs. I will bring some tonight in case - but I have to have these faxed off by tomorrow morning.

I might try to make this aswell since i'm there anyway. Would have actually prefered to do the HSV day rather than the MSCA. Dunno if I can afford both. Are you doing both Andrew?

When is the closing date they speak of? Is it going to be $110 or $200???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...