Jump to content
SAU Community

Recommended Posts

hmmm does anyone know if Type R integras pull hard? my mate said he nearly got done by one and he has a R33 gts-t.  The integra was the new model one. (with the copy cat skyline lights at the back)

the new type R's will give any stock 33gtst a run for their money. i was just under a car length ahead in mine till i put it in third and we stopped there at 80. was no point goin any faster on public roads and we had fun even though it lasted a couple secs. much respect to the new type R.

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

AWD is available in the US and kicks most nissan and other  :Oops: butt.

Hey, I own a Starion as well. :D

contray to popular belief overseas..

the DSM cars are not all what they would appear to be.

sure, they have 4WD and a turbo inline 4 based off the 4G63.

and unless you get a turbo upgrade (which can cost thousands here) your DSM is not going anywhere. true, lots of boost on the stock turbine is good too, but it can only take the car so far. the size of the turbo is what i'd call tiny (with the housing, it's only about as big as a CD). on a side note, the 2nd gen DSM uses a T25 turbine.

the engines also have their fair share of problems, mainly crankwalk (which occurs in 2nd generation DSMs). crankwalk is when the crankshaft moves out of place naturally, perhaps due to an engineering miscalculation ? this basically renders the engine as junk.

i don't have much faith in these cars, they're ugly, they've been riced out, and they're heavy as $#*$ too. it'll pull on me in a 1/4mile, but from a rolling start; it doesn't stand a chance. my friend's EG civic with a b16a(cable clutch version too)with bolt-ons can outrun an equivalently modified Eclipse GSX (turbo 4wd model) from a rolling start.

(on a side note, i think i would've rather had chosen the FTO GPX over the Eagle Talon/Mistubishi Eclipse...but then again, on paper, it looks very much like a Honda Prelude with a 2000cc V6 as opposed the Prelude's 2200cc inline 4.....and good god, don't even talk about Preludes)

and on a side note:

i haven't driven, let alone even seen a Skyline or FTO in my life..but, i already know the easiest answer to the thread starter..you got burned, simply because the FTO had an advantage over you:

-less weight (still less than you and your sister...even when he has a full car load)

-doesn't the FTO rev higher...i remember seeing somewhere online that it peaks right before 8000rpm

-it was probably heavily modified, i've seen/met up with plenty of cars like that in Canada....you think they're slow, then they show their true potential (stock looking MKIII Supra turbo making 630rwhp) and it leaves you scratching your head...or at least feeling like an idiot for even trying to race.

Man i don't know why all your N/a are so slow.

ive got a 1994 GTS25 5 speed, all that i have done to it is K&N filter, when i got it, it had a exhaust and thats all that i know of. no extractors. its got 4ws and a LSD.

and i am yet to loose a race to a V6 commodore or falcon.

ive raced 3 r32 GTS-t got to about 120km/h and i was 1 1/2 car lenghts in front of them.

raced a 5L VN Calais with extractors and exhaust and left him about 1 car lenght behind me as soon as i got out of second.

ive raced a BA XR6 N/A same as above.

on a cold day me car does 0-100km/h in anywhere form 6.5- 6.9 seconds. thats if i change gears on time.

Pffft I could take Falcodores in my Twincam Corolla.

The R32 GTS-t's must have been piloted by corpses if you beat them.

BA XR6...too fat and slow to even try to be fast.

Man i don't know why all your N/a are so slow.

ive got a 1994 GTS25 5 speed, all that i have done to it is K&N filter, when i got it, it had a exhaust and thats all that i know of. no extractors. its got 4ws and a LSD.

and i am yet to loose a race to a V6 commodore or falcon.

ive raced 3 r32 GTS-t got to about 120km/h and i was 1 1/2 car lenghts in front of them.

raced a 5L VN Calais with extractors and exhaust and left him about 1 car lenght behind me as soon as i got out of second.

ive raced a BA XR6 N/A same as above.

on a cold day me car does 0-100km/h in anywhere form 6.5- 6.9 seconds. thats if i change gears on time.

The only waty your gts could keep up with a V6 commodore if the commodore wasnt even trying. There is no way in hell that you could beat a R32 gts-t in a gts. In your dreams it doesnt count.

and you probably measured your 0-100 on a timer that stops at 6 seconds and couldnt go any further.

:bs!:

give me a couple of months krzysiu, and I'll kick your skanky ass in my R32 GTS :cheers: (never mind the RB25DET and the TD06 25G that's sitting under the bonnet)

and kaz141, mate grow up and stop racing old people on the street... :D

mate own a EK4 with full exhaust (4-1 mainfold, high flow cat, cannon exhaust) and run 16" TE37.

I run him a while ago and suprise me how quick a N/A 1.6 car can be.

rolling start in second and at the time i change into 3 he still manage to keep his car in about 1 car lengh behind.

i "think" it will eat the FTO & N/A gts.

sure the type R is even better.

The Jap spec new Type R (DC5R) is faster than DC2R in both straight line and track

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
×
×
  • Create New...