Jump to content
SAU Community

Recommended Posts

It time to get some new rubber on the beast.

At the moment Im running 225*45*17 all round.

(I think the wheel size is 17*7.5jj)

For some weird reason I suffer from a lack of traction at times...

Anyone got any recommendations on what size tyres to put on?

Would 245*40*17 all round be a decent choice?

or prehaps 245*40 at the rear and 225*45 at the front?

Or am I just better sticking with 225*45 all round?

Link to comment
https://www.sau.com.au/forums/topic/50735-tyre-size-recommendation-for-r34gtt/
Share on other sites

I'd be very careful. Changes to the rolling diameter can affect the TCS adversely and think its constantly slipping. Now of course if you drive with it off its doesn't matter.

Thanks for that.

According to the book at the tyre dealer the difference in diameter between both sizes is 4mm. You get more difference than that between a new and worn tyre so it should be ok I guess.

Why wouldn't you put the widest tyres you can fit and afford?

You might have different width if your rear guards can hold wider than your front ones as they do on a GTT but with 7.5" wide rims you're not where near too wide so put the widest sensibly possible on there.

Why wouldn't you put the widest tyres you can fit and afford?

 

You might have different width if your rear guards can hold wider than your front ones as they do on a GTT but with 7.5" wide rims you're not where near too wide so put the widest sensibly possible on there.

Ok, thanks.

That makes sense.

I assume that 245 is as wide as I should go on 7.5" rims?

Is there any particular reson to put the same width on front and back?

Ive seen a number of cars which are different from front to rear.

yeah the wider your tires on the front the more 'vague' the steering will feel.

ie. I wouldn't go over 235 wide on the front of my GTSt

Then again tyre brand and quality is more important than overall size for handling

245's will easily fit on 7.5" wide rims.

I am not sure if 255's would fit on 7.5" though?

But as Tony said 255 wide tyres fit on a skyline easily with no troubles.

I had 235 front and 255 rear before and it didn't bring up the slip light.

I'll be running 245 and 265 next month :)

Silly question maybe, but why would different sized tyres bring up the slip light?

Do you mean different sized front to rear ?(I could understand it, if they were different diameter), or just different sized from standar all round?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Read the ECU for fault codes or have someone else do it. A faulty coolant temperature sender is usually listed in ECUs. If the sensor itself is not busted it can also be a bad ground connection. Or in a really unlucky case, damaged wiring.
    • Can't be a Futjitsubo as those are made with a flex piece and Reimax is smaller in pipe diameter. If anything it is closest to a Mines pipe, but evidently it is not an actual Mines pipe.   Classic word humor
    • Alright I will try to not forget.   As GTSboy replied to you already, problem is mainly the mismatch between the actual exhaust part and the denomination in the papers. That basically just looks like tampering to a cop, if they were to check your car and notice. If it had been done right they would have clarified it to be a custom pipe and just given it a certain part number that you have to engrave or weld onto the pipe. I will definitely inquire on what to do. Changing the pipe wouldn't be my favorite solution as it costs a bunch of money and the cat was fitted with the front pipe and exhaust under the car, and if the front pipe flange does not sit in the OEM location the cat will need to be refit for any other pipe to work. It also usually doesn't need a brand name or something like that, but more something like a part number. Usually for exhaust parts, on silencers and cat units specifically, there is a badge that reads the certificate number that belongs to these exhaust parts under EU regulation. You get these numbers after you put a part or group of parts through the tedious testing according to EU vehicle legislation and they pass. You can find these "part numbers" on various parts throughout a EU vehicle. On windows, headlights, engine parts, seat belts and so on. All these parts have gone through standardized testing and acquired a so called ECE or EG Certificate that makes them legal to use by themselves in all countries that adhere to these standards. You can also not alter these parts in any way, if you do they become illegal. An example for stampings on an exterior lighting part, the people who need to know can find the documentation for this unit in a database. I do not know what all the standards and so on mean.
    • If that was the case I suppose you could call it "Mein's" brand....  ... I'll see myself out... 😅
×
×
  • Create New...