Jump to content
SAU Community

Recommended Posts

Yep, you left off console, pedals (you have to change the brake pedal, as well as add the clutch pedal), clutch master cylinder, speedo drive, tail shaft, gear lever, spiggot bearing and probably a few more incidentals.

Yes you can use an auto ECU, I have seen many over the years doing exactly this. All you have to do is short the neutral cutout switch, so that the ECU permanently sees neutral. The mixtures are out a bit as the ECU sees neutral when you're obviously in gear and putting load on the engine, and apparently the mapping is different between the two as well.

so what would be better rb26dett box or a rb25det box with an auto diff any problems fiting

the gtr box apart from removing the transfer case

They are internally the same, so there is no real "difference". I suggest you have a look at a GTR gearbox, simply "removing the transfer case" is not an option.

You can use Auto ECU and get away with it but u may not get optimum result. Checkout the dyno sheet below, which is a manual conversion R33 GTS-t still using the original Auto ECU. See where the auto ECU cut power to allow the auto gearbox to shift (cos it thinks the auto's still there).

You'd get better result with Manual ECU. Also have a look at my leaner A/F ratio, so you gotta be careful with boost not to get it too lean and detonate your engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To install new hicas ball joints do i really need to pay for the Frenchys hicas install tool? Or can i use something like this? https://www.ebay.co.uk/itm/395524214497?_trkparms=amclksrc%3DITM%26aid%3D1110018%26algo%3DHOMESPLICE.COMPLISTINGS%26ao%3D1%26asc%3D281023%2C280568%2C280618%26meid%3D4018390c9ba246f794ed58b8b19ec80a%26pid%3D101430%26rk%3D4%26rkt%3D12%26sd%3D205160403603%26itm%3D395524214497%26pmt%3D1%26noa%3D0%26pg%3D2332490%26algv%3DCompVIDesktopATF2V2AndXaiHotClickWithCompV6WithEbertNRTRecall%26brand%3DUnbranded&_trksid=p2332490.c101430.m2460&itmprp=cksum%3A3955242144974018390c9ba246f794ed58b8b19ec80a|enc%3AAQAKAAABMDJfxvEKz%2FWsdyy97PIVwAhtkTIJPGKp%2Bu7TYjjsvNO4eN9duTRR%2FSVFYts6UXmN8tSK75ee0LypjLaKkPNQ2gkat4DyNLnViXKBVpI1%2B5fAYfWiGJa5QlqEPseqbSJUD9gVo2KSXbnmQjuPDJH4flTH2bOLSO%2FvMrLjgPDIc7vGrlKtoSauZb0q%2Fu43zLR0J8tg1z5dPMV%2FcHtnqRYXb7R7V8G%2FrQGhpY1sWtGJXc4TWc78ccs69UXnMiCqqd05ITd%2BY7Vwbq5Uzd%2FWhmiZCytO66vqDnbJn03qN%2Bin0ImF5sgbgu9uD45tXNN8cr4IWfqzIEEpaKcgqilwbTDxMkIQ4sGcgz7IhYONV017vE6P9ksZ7n%2FFVwgs3kAfMb0%2FLGjwaqhwo0yilTIjGHg9mwU%3D|ampid%3APL_CLK|clp%3A2332490&itmmeta=01JMR0X9WMB8DPEX82P2P3CRXN
    • I would be lying if I said I wasn't interested in what MCM were going to do with the NC I really enjoy their banter and occasional collaborations (like Alan from TSF, Ben from BCW, or any of the Haltech guys throwing around their experience), and I have probably watched everything they have put out
    • Not yet, we basically drove it to a private road, got the logs and drove it straight back. I think I need a new passenger seat belt after the mrs squeezed the life out of it. 
    • Sounds insane! 馃い馃い馃い  Do you have any vids of it driving?  A flyby would be nice!
    • The prices of NCs are going to go up thanks to you... and partially the MCM guys.
  • Create New...