Jump to content
SAU Community

Recommended Posts

Hi,

There are alot of r33's out there, getting imported with about 100K on the clock. So that's a major service point with the timing belt. My question is, how long do these engines last before having to get rebuilt?

Will they last another 100K before another timing belt is needed and at what km would the engine need to be rebuilt?

Thanks,

Dizzo

Link to comment
https://www.sau.com.au/forums/topic/51283-r33-engine-life-expectancy-rb25det/
Share on other sites

There's no definate km's where it must be rebuilt for any engine

it's all about how you treat it. Start her up eveyr morning and take it to the redline in every gear while it's cold, dont service it, drive it to it's limits all the time and dont expect it to last too long

Take it easy, treat it well, service regulary and you shouldnt have a problem for a fair while.

there was a guy in NT (I think), who had his R31 station wagon do more than 1,000,000 km without a rebuild. I think a mate of mine still has the newspaper clipping...

Yeah, you are kinda asking "How long is a piece of string?", but I gather you want to know how long you can go without a rebuild if properly looked after... I don't see why you cant get more than 300,000 km (assuming the previous owner looked after it too). But I expect the turbo to let go before that...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
×
×
  • Create New...