Jump to content
SAU Community

Recommended Posts

Bit of a long shot to post here but here goes.

I've got a 99 lancer gl sitting in my back yard, smashed at the front with slight damage to the firewall. Basically this cant be fixed cheaply and has been abandoned by my insurance company (longer story) so i wanna do something with it!

plans: since the front right arm is bent

tube frame front end with an CA18 or SR20 turbo in it, with conversion to RWD!!

just wondering if anyone knows if the chassis of the FWD lancer i the same as an EVO lancer????

just to make things easier and not have to build a new tunnel for it, i have notice that the fuel tank is under the rear seat so this will have to be removed, just hoping that with that removed i can run a tailshaft through! just running a fuel cell in the boot.

if any one has seen lancers with similar mods or RWD conversion if they could post links/pics that would be great. this is a weekend job just for a fun track/drift car!

any and all suggestions welcome!

cheers :D

Link to comment
https://www.sau.com.au/forums/topic/51419-lancer-modding-about-to-begin/
Share on other sites

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

hehehe yeah i know, but its just sitting there and cant do anything else with it!

i had a look a while back, it has a tunnel but not sure if it is big enough to run a tail shaft down! not a hard thing to create a bigger tunnel, have done them before, but hoping that i dont have to do it!

fresh, if you find a mag with it coudl you check for me!

I was just showing what i've seen in relation to modded lancers, I wansent telling you to do the same :D

I'd go with your idea!!!

FWD you brake to many drive shafts & no traction...

Rwd is more fun, I'd Go SR20DET and it will be a serious weapon.:)

I'm curious to see the end result

:D

i'd say it would be too much work to make it RWD.

If you want to do a project, i'd sell the car as is for a few grand if possible, buy an R31 and do an rb20det/rb25det/rb26dett conversion. At least then it will bolt straight in, it will already be RWD and you'll be driving a nissan :D

who are you and what do you want?

every post i've seen of yours is utter stupidity

warned for trolling - 5 points

Excuxe me but who are you and what do you want?

If you dont like what i write dont read it! Everyone is entitled to there own opinion, I just dont like lancers!

I am very offended by you warning me! :):):rant::rant::rant:

well i understand your feelings and i am hearing that you are offended

i hope we can reach a mutual agreement and understanding of terms in this matter

lets try to work through this and be better people for it

:bananaman :bananaman :bananaman :bananaman :bananaman :bananaman :bananaman

Excuxe me but who are you and what do you want?

If you dont like what i write dont read it! Everyone is entitled to there own opinion, I just dont like lancers!

I am very offended by you warning me!  :)  :)  :rant:  :rant:  :rant:

Entitled to opinions maybe, but have you heard of the phrase "If you don't have anything nice to say, don't say it"? There was nothing constructive about what you said. I know quite a number of people with EVOs that would probably make you cry if you went for a ride in driven hard.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Mainly being afraid of breaking something on something i've poured so much money into haha
    • Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
    • Yep, looks that way. Never driven an E30 or R31 so I can only imagine  
×
×
  • Create New...