Jump to content
SAU Community

www.imports101.com.au

N I B

By N I B,
in General Automotive Discussion

 Share

Recommended Posts

Veilside R33 Veteran

Veilside R33

Posted
Posted

ok hang on, there is a sweet 95 R33 gtst with mods in immac cond, lander for just over 12k, now getting over the initial shock of such a low price and the thought that there are about 10k worth of fees about to hit me that i havnt seen, can anyone clear up how much im looking at roughly to have the car fully complianced and arrive at my door?

if its anywhere round 17k then consider mine for sale!

predator Grand Master

predator

Posted
Posted
even considering the compliance cost of $3500... thats still round $30k for a 96 R33 GTR. If these prices are correct (tend not to be) then these guys will put up some competition with jspec and prestiege... but we are yet to find out their reliability.

They are just standard prices.. you can get cheap R33 GTR for around $30k.. have been for 12 months. Quality debateable.. but my mates R33 has had no problems and is very clean and purchased for $32k.

N I B Grand Master

N I B

Posted
  • Author
Posted

Seen a lot of prestiges cars in there getting there compliance work done by Danny.

This company has been in the same compex as me for a long time and we do work for them a lot and the standard they demand from us is very high so id expect all their work to be high standard. If you doubt them have you ever seen garrantys anywere in OZ like they have?

Mr_G Mentor

Mr_G

Posted
Posted
ok hang on, there is a sweet 95 R33 gtst with mods in immac cond, lander for just over 12k, now getting over the initial shock of such a low price and the thought that there are about 10k worth of fees about to hit me that i havnt seen, can anyone clear up how much im looking at roughly to have the car fully complianced and arrive at my door?

if its anywhere round 17k then consider mine for sale!

If your looking at the white 95 R33 which has those new alloys, aftermarket front bar and m-spec skirts, this car got listed and sold on prestige over the weekend.

Danny101 Newbie

Danny101

Posted
Posted

As stated by GTS-t VSPEC, the prices are that way for a rerason. Compliance costs, freight costs and licencing costs all vary considerably from state to state. The constant costs are included in the listed price, then you just click the cost calculator and it does the rest. I have never heard so many people complain about how cheap cars are?

There seem to be a few sceptics.....If anyone has any genuine questions I am happy to explain everything. We don't have anything to hide and are not new kids on the block.

sewid Grand Master

sewid

Posted
Posted
how do you work out the cost of compliance for the particular model you are after i.e stagea?

There is no secret way. You just have to go to the DOTARS website, find out who can comply the model you want, and call around and bargain them down.

Search from here: http://raws.dotars.gov.au/rawswebpublic/RA...AWPubSearch.asp

Veilside R33 Veteran

Veilside R33

Posted
Posted
As stated by GTS-t VSPEC, the prices are that way for a rerason. Compliance costs, freight costs and licencing costs all vary considerably from state to state. The constant costs are included in the listed price, then you just click the cost calculator and it does the rest. I have never heard so many people complain about how cheap cars are?

There seem to be a few sceptics.....If anyone has any genuine questions I am happy to explain everything. We don't have anything to hide and are not new kids on the block.

its simply hard to beleive, thats all, i paid 15k fo my R33 with a few mods and got an absolute bargain (private sale) so its crazy so see even better cars ready at my door for 12k!!!

i'll sell mine and line something nice up from you guys for around 13k

predator Grand Master

predator

Posted
Posted

guys - look into the full costs, and use the cost calculator, work out what a new set of tyres, rego, and stamp duty will cost ($1000-$2000). Compliance on R33's has become quite cheap because they are common us muck... but is still around the $3000 mark. Their fee isn't listed on there in there "landed" price either, so you gotta whack $1200 ontop. So realistically, add about $5-6k on whatever price they have on there for any vehicle. And no you can't just "avoid" any of these extra charges in any way to get your car on the road.

I'm not saying they are not reasonable prices, but never go thinking you can get an R33 turbo for like $12k - you're only going to be disappointed. This is nothing against this company's service, just that research everything fully before getting too excited.

Guest

Guest

Posted
Posted
Stageas under 20k has to be good.

http://www.autowholesale.com.au/ and they start at $17,000/$18,000 and you get 3 years Warrenty.

Just ring around in your state and find the best price you can get especially on R33's as on the East so many workshops are doing them, the only cars you cant bargin on are EVO VII's and RX7's.

Check http://raws.dotars.gov.au/rawswebpublic/rawpubmain.asp and it will tell you who has what, ask the workshop who they recommend to source un-damaged cars as DAMAGED/REPAIRED cars arent to be complyied and I would love a RAW to put in writing they will comply damaged cars from Japan.

A few people have had their cars scraped in the last month as the RAW's knocked them back as they were cheap for a reason.

It cost's the same who ever you use, it is just who you want to spend your money with.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Rb25det vs Rb25de rods and crank are same?

      By GTSBoy · Posted

      The only Neo rods that were any different to any other RB25 rods were the DET ones, and they were the same as RB26. Here is a Neo DET rod. O5U part number visible. Here is a post in a thread here on SAU with evidence from someone who has done this before. There are photos in the thread of normal RB25 rods.  
    • joshuaho96
      Magnetic Drain Plug Snapped in Half

      By joshuaho96 · Posted

      Sure, but why assume that will be the case forever? And why assume you'll be able to do an oil change to swap back to a stock drain bolt before that happens? And does it even matter when I change the oil at fairly short intervals? Life can be funny sometimes and unexpected things can happen. Like breaking a collarbone so you can't do any work on your car for a few months but the oil change is due so you have to take it to somewhere and hope they don't do something stupid like stacking the new drain plug washer on top of the old one.
    • Manur33
      Rb25det vs Rb25de rods and crank are same?

      By Manur33 · Posted

      Do u know how to identify the rods are rb25 or neo ones? Can u look into the pics and tell me is they de or de neo ones. Its confusing becoz my motor has de neo head but block is 25de 75t, so really confusing me about rods, crank.
    • GTSBoy
      Rb25det vs Rb25de rods and crank are same?

      By GTSBoy · Posted

      Are you talking about the oil squirters? There is only one place for them to go. Yes, you have to drill the holes. Yes you have to obtain the correct oil squirters (I presume there is some sort of aftermarket option available, because original turbo ones are going to be a diminishing resource).
    • MBS206
      Magnetic Drain Plug Snapped in Half

      By MBS206 · Posted

      I thought you didn't let mechanics, especially those with no idea, work on your car any more? Wouldn't that mean it won't be an issue in your case?
×
×
  • Create New...