r32 brake layout...

[killemaul]

i was just wondering if anyone new where the pressure regulator is on the r32's. i just got a skyline recently and there appears to be a blockage and i like rear brakes. any help would be great, or if people know what is causing no pressure to get through to the rear calipers..... fronts are fine! Its nice to finally join the "line" club...

Thanks.

Chris

[SteveL]

i was just wondering if anyone new where the pressure regulator is on the r32's. i just got a skyline recently and there appears to be a blockage and i like rear brakes. any help would be great, or if people know what is causing no pressure to get through to the rear calipers..... fronts are fine! Its nice to finally join the "line" club

If you mean the proportioning valve, it's built into the master cylinder......or it is in the R32 GTSt master cylinder that I pulled apart....

[killemaul]

heh.. ok i wanted to do the seals on the MC anyway... i'm very new to skylines so i'm still learning... but i usually pick up stuff quick... thanks for the help!

Chris.

[killemaul]

any other thoughts or ideas.... id prefer to not have to replace the master, but if you've had the problem before...any remedy that you might know of??

Thanks.

Chris