Jump to content
SAU Community

s15 =>RB26 conversion

motorcafe101

By motorcafe101,
in General Automotive Discussion

 Share

Recommended Posts

ido09s Mentor

ido09s

Posted
Posted
Thirdly, why do you want to put an RB26 in the S15? You have to ask yourself some pretty serious questions about cost vs benefit.  A well built SR will be reliable up to quite a number of kay-dubyas (i don't have experience, but may people build mega hp SRs). What sort of hp do you want? RB26s are expensive to make high hp (compared to SRs) - would it be more effiecient to spend all the custom fab cost of dropping in the RB on modifying the SR anyway? And would the chassis balance be ruined by dropping in another (guessing) 100kgs in the front end? eg. Meggala pulled out an RB20 from his Ceffy and dropped in a SR.

Most poeple do it cause to be honest unless you have some seriou cash and an awesome engie builder the SR wont last at power levels above 330rwkw..... at this power level you will have to have the block sleeved and have some pretty serious internals.... when you think of what it could cost to have an RB26 in a 200SX it makes sense to replace the SR. An RB26 wil hold 350rwkw with ease and would not take a heap of work to get it there, some nice turbo's, cams, gearsand the ususal bolt ons would support this pwoer level ;):D

Chassis balance wise...... there is no hassles with an RB26 in a 200SX if your not a very serious track racer. There is about 100kgs difference and most of this would be the gearbox. Using an RB26 you will see very little change to the handling and traction wil actually be improved with the right suspension set up due to the more linear power delivery. kw for kw the RB26 will make a far quicker and nicer car to drive than the SR ever will :):D

Definitely a converison worth doing if you can afford to do it properly.... brakes, oil cooler and larger sump are a definite for logevity of the RB26 as well ;):D

INASNT Grand Master

INASNT

Posted
Posted
Most poeple do it cause to be honest unless you have some seriou cash and an awesome engie builder the SR wont last at power levels above 330rwkw..... at this power level you will have to have the block sleeved and have some pretty serious internals.... when you think of what it could cost to have an RB26 in a 200SX it makes sense to replace the SR. An RB26 wil hold 350rwkw with ease and would not take a heap of work to get it there, some nice turbo's, cams, gearsand the ususal bolt ons would support this pwoer level :D:D

Chassis balance wise...... there is no hassles with an RB26 in a 200SX if your not a very serious track racer. There is about 100kgs difference and most of this would be the gearbox. Using an RB26 you will see very little change to the handling and traction wil actually be improved with the right suspension set up due to the more linear power delivery. kw for kw the RB26 will make a far quicker and nicer car to drive than the SR ever will :P:D

Definitely a converison worth doing if you can afford to do it properly.... brakes, oil cooler and larger sump are a definite for logevity of the RB26 as well :):D

Very true but if it was a S13 or even S14 yes but a nice S15 i would think more that twice before doing the convesion.

Theres a S15 that runs 10's using the SR20 so they can handle alot of power

ido09s Mentor

ido09s

Posted
Posted
Very true but if it was a S13 or even S14 yes but a nice S15 i would think more that twice before doing the convesion.

Theres a S15 that runs 10's using the SR20 so they can handle alot of power

they will handle the power, but for how long...... at the end of the day the RB26 will handle 350rwkw day in day out with turbo's and the usual support systems..... an SR20 will have its days numbered at this power level.

ido09s Mentor

ido09s

Posted
Posted

this is where the decision has to be made, i totally agree. If he is serious about his motorsport i would highly recomend this converiosn, if he is just after a quick streeter i wouldnt waste my cash as any S15 with 200-230rwkw will certainly be a weapon :D:D

motorcafe101 Enthusiast

motorcafe101

Posted
  • Author
Posted

thanx for everyone who provides me the information abt the topic... :)

well, first of all, my mate's s15 spent 20 grands to buy just the parts for the internal (jun 2.2 kit)....motec, 2.0 bar of boost and making serious power 320kwrw, i think that's the peak power for an sr20, isn't it....now, he's facing the gearbox problem...:)

for a r34 rb26dett at brisbane autosalon, (the midnight purple one) he made serious 340kw@all wheels, just cams, bolts on turbos, ecu and a serious power tuner.....and r34 gtr engine is what i got for this conversion...

i found the differences between a seriously built sr20 and slightly built rb26....

what are u guy's opinions?....:)

ido09s Mentor

ido09s

Posted
Posted

you got an R34 GTR RB26 for $1500..... dude, i know you told us its none of our business but i would seriously doubt anyone would sell a good condition, legitimate R34 RB26 for $1500.... this engine and gearbox would go for close to $10,000 and your teling me someone is giving up all that extra cash..... are you sure its an RB26 and not just an RB25 with RB26 rover covers, spark plug covers and timing case???

as for the conversion...... what do you want from the car??? is it going to be a drag car, circuit car, street car, weekend car, daily driver.... all this will come into play when making your decision for what path to travel... how much power are you seriously wanting to make regularly.... you need to tell us what your intentions are for the car for us to give you our honest idea's......

cefiro Experienced

cefiro

Posted
Posted

Hey mate,

I saw a s14 with an rb26 in it at advan at silverwater in sydney

Firstly its got to be the same conversion I would think for an s15, second maybe you can have a word to them and see what you need they are nice guys there and always seem to be helpful when I have been there. Its actually a chick who owns it. That is an awsome project, and if you decide to not go ahead with it then consider the engine sold as Ill take it ha.

Good luck I am sure it will be worth the effort.

CGB_R32 Proficient

CGB_R32

Posted
Posted

If you direct your attention to the thread in the for sale section hes trying to palm off this engine and we have reason to believe its stolen. Im hoping your just a school kid doin this for shits and giggles and not a representitive of the 101motorcafe up here in brisbane, coz if you are after reading the thread in the FS section your one dodgey basterd.

ido09s Mentor

ido09s

Posted
Posted
I saw a s14 with an rb26 in it at advan at silverwater in sydney  

Firstly its got to be the same conversion I would think for an s15, second maybe you can have a word to them and see what you need they are nice guys there and always seem to be helpful when I have been there. Its actually a chick who owns it. That is an awsome project, and if you decide to not go ahead with it then consider the engine sold as Ill take it ha.  

Good luck I am sure it will be worth the effort.

that chick would be my girlfriend :D:D:D Very worth it this conversion is, but unless you want to spend some bucks and get the job done right, i would not think about it.....

motorcafe101 Enthusiast

motorcafe101

Posted
  • Author
Posted

ppl just can't believe that i am doing this project rite....:D

okay wait and see....LOL

ps. i am not representative of 101motorcafe down in brissy, it's just that i like this name....

ps. i bought the engine for $1500, but i want to sell it for at least $6000, what's the problem? if no one is buying it, i rather just use it for my project "gtr15"

thanx everyone, i'll see u when the project's done and post some pics, okay...:)

TO SEE IS TO BELIEVE

d1-monkeh- Contributor

d1-monkeh-

Posted
Posted
ppl just can't believe that i am doing this project rite....:D

okay wait and see....LOL

ps. i am not representative of 101motorcafe down in brissy, it's just that i like this name....

ps. i bought the engine for $1500, but i want to sell it for at least $6000, what's the problem? if no one is buying it, i rather just use it for my project "gtr15"  

thanx everyone, i'll see u when the project's done and post some pics, okay...:)

TO SEE IS TO BELIEVE

I was just speaking to this guy 0nce again ..

HE now claims he has a R34 GT-R VSPEC.. it is dark blue and the plates he claims are GTR-8

HE also claims it was at autosalon brissy ( prob was.. not his offcourse ).. he also said he payed 5500 for the engine.. and he said he sold it just then........ ( 1 hour ago..) what a piece of crap.. delete this thread!

INASNT Grand Master

INASNT

Posted
Posted
ppl just can't believe that i am doing this project rite....:D

okay wait and see....LOL

ps. i am not representative of 101motorcafe down in brissy, it's just that i like this name....

ps. i bought the engine for $1500, but i want to sell it for at least $6000, what's the problem? if no one is buying it, i rather just use it for my project "gtr15"  

thanx everyone, i'll see u when the project's done and post some pics, okay...:)

TO SEE IS TO BELIEVE

so you buy stolen stuff then try sell it as a legit item?? fist.gif

JH32 Grand Master

JH32

Posted
Posted
I was just speaking to this guy 0nce again ..

HE now claims he has a R34 GT-R VSPEC.. it is dark blue and the plates he claims are GTR-8  

HE also claims it was at autosalon brissy ( prob was.. not his offcourse ).. he also said he payed 5500 for the engine.. and he said he sold it just then........ ( 1 hour ago..) what a piece of crap.. delete this thread!

that car is/was on www.carsales.com.au for about 135k

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • AdiR34
      R34 Gtt Wheel Offset Advice

      By AdiR34 · Posted

      Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...