Jump to content
SAU Community

Recommended Posts

Hi does anyone have any experience with Haltech E6K???Any comments. Technically on paper it seems to be good.How does it compare with say power fc?

Is it reliable and constant in its performance?

Is there any good haltech tuners in melbourne because i heard that its tuning software is quite complicated.

By the way does anyone have the address or telephone of Hypertech(formerly BGT) in Vermont South?

Thanks.... :)

Link to comment
https://www.sau.com.au/forums/topic/5195-haltech-e6k/
Share on other sites

Speedo, i know two people using the EK6 who are very happy with it, Lepperfish on these forums fitted one to his R33 GTST it it goes pretty well. It was fitted and tuned in Sydney, not sure about Melb but they certainly seem to be a good ECU

Might be worth chatting to some reputable import tuners in your area and seeing what ECU they recommend.

Link to comment
https://www.sau.com.au/forums/topic/5195-haltech-e6k/#findComment-79873
Share on other sites

Fitted one in a VL Commondoor with an RB-20 in it and tuned it with no real dramas. You can't really compare the Haltech with the Power FC, as the P-FC will plug straight in, ease on install is a lot easier. Haltech you need to pin off specific wires, or create a new harness for the engine.

Advantage with the Haltech is the cost, around $1,500.oo for the whole kit with loom, sensors etc. All you need to buy is a 2-Bar Map sensor.

Link to comment
https://www.sau.com.au/forums/topic/5195-haltech-e6k/#findComment-80302
Share on other sites

Speedo, what car do you have?

If your considering cost mainly then check out the micro tech. it may even be slightly cheaper than the haltech. You'll be able to plug and play if you have a 33.

Either way, from what ive seen from my car and others, there is little point spending the extra cash on a Power FC. Tuning with the FC hand controller takes longer than computer tuning and adds cost also, so ive heard.

Link to comment
https://www.sau.com.au/forums/topic/5195-haltech-e6k/#findComment-83317
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh bugger ! Your right ! Good old hydrogen sulfide. Takes me back to the good old school days ! 
    • I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
    • Oh wow, it's easy to forget how cheap these can be. Probably the cheapest way to travel. Though people in cars here tend to be morons and I would not feel very safe. Were scooters ever big in Australia? It used to be the thing growing up in Europe ~20 years ago. 50/70/125ccm Peugeot or Yamaha and some others. Utterly obnoxious Polini race exhausts. Kick stands that slant as much as possible. So loud. So much noise for really not moving very fast at all. But it felt cool at the time. Not sure where I'm going with this, but there is an aftermarket for mopeds! Though I'd have pictured you more for a Goldwing kind of guy after growing out of the Harley.
    • You need to know I am sorry for this.  
    • As the MX5 isn't apparently "manly" enough, and I need something for runs to the local shops, and also take to my part time job at the salon, basically I can keep the MX5 away from car parks and stuff......like "flying lockers", I was wondering what I could buy to fix this issue LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1    
×
×
  • Create New...