Jump to content
SAU Community

Recommended Posts

Ive been wanting a R33 OR R34 GTR for some time since I sold the gts25t.

Then came across the RX7 series 8. Has anyone compared the 2 cars. Not fussed about fuel economy, more so the difference in power delivery, driving pleasure and handling.

Im aware the gtr is more powerful, but in the real world is it actually faster?

Anyone had any first hand experience with problems with the rotary engine?

Im really undecided any help appreciated.

Cheers

Oz. :D

Link to comment
https://www.sau.com.au/forums/topic/51950-rx-7-series-8-vs-gtr/
Share on other sites

Drive them both first. Personally i'd prefer the RX7, they are said to be absolutely addictive. Plus it'd be a more practical daily driver(more luxuries etc) and would be just as quick as a GTR in everything except 1/4 mile sprints(and how often do you do that anyway?).

Depends on the level of modifications..

I believe the S8 has the oil problems sorted with the TT setup by then.

If you're looking at limited modifications, they're both going to be very reliable.

I've had a big hp 13BT before and they're definately a good thing, just need to look after it very closely. Im still a nissan man tho, which is why I still drive a GTR :D

If you are serious about your track performance, I'd go the RX7

BlackRobin: Don't feed the trolls... it is school holidays, just ignore him.

I would go the R34, simply for the extra interior room. The FD is tiny inside.

My head touches the roof and I am not that tall!

I could never drive it with a helmet and that means no track days which means arrrrghhh!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As GTS mentioned, it takes a bit of faffing, some fiddling and a little modifying.  With the strainers, you can buy different styles. Some sit flat on the pump, some angle down.  Here are some photos of mine, ignore the ugly welds lol. 
    • The smart thing is to actually locate the pump at the right point down the hanger, so that the strainer can stay sticking out at a right angle, but near the bottom. This is the perpetual hassle with retrofitting any different pump to the factory hanger. Some just go where you need it to, some need fiddling and faffing, and modifying of stuff.
    • Some updates. After a lot of praying and some inspecting of crank threads, we've found that they were both kinda munted but nothing seemed terminal. The other option was drilling and helicoiling the crank. That is obviously the last option so we decided to at least try to get a OEM GM bolt in to GM Specs. So after honing/linishing the balancer from it's .002" interference fit to a .0018" to .0015" to .0013" it eventually slotted on to the crank. ATI state the interference is nominally 0.0007-0.0009... so it's still snugger than ATI reckon and explains the issues we had to fit the thing to begin with. New GM bolt went in at 37 ft/lb then torqued 140 degrees after which was EXTREMELY   but it tightened up to 140 degrees and it was a lot of force. So all things considered, the balancer is secured to the exact specs that GM want with the OEM Stretch bolt, (that ATI say you can use..) and the balancer itself is seated and snug AF. So WOO. Engine is now back in the car with lots of swearing. Bellhousing bolts done up, driver side manifold is on, AC Compressor and hard lines are back on the car. Next step will be to connect various engine bits/wiring/intake/radiator etc. Then oil and coolant and ... test start it? And of course, looking into this issue... which actually doesn't look so bad - It looks like it can be twisted back into shape with a set of multigrips. Anyone wanna buy my bonnet? Boy it looks good over there and sunk cost sucks.
    • Also this may be a stupid question, but how would you recommend getting the strainer on a downwards angle ? as they tend to obviously clip to the bottom of the pump which usually sits level 🥴
×
×
  • Create New...