Mods for 200rwkw?

[kane]

hey all,

what mods would i need to do to a r32 gts-t (rb20det) to have around 200rwkw?

i was thinking:

-3inch turbo back exhaust

-fmic

-safc

-up the boost

and id be looking at how much all up, im thinking $2,000-$2,500?

[DezertEagle]

Yep you should get 200 with them mods.

But I'd be abit cautious with the SAFC-II, timing really suffers

I recommend:

- Turbo Back with Hi Flow Cat

- FMIC

- Power FC

Even with 'stock' boost, you should have a very RELIABLE and quick 'enough' car. Next step would be EBC if you really must.

[kane]

what figure would i expect running:

-power fc

-turbo back exhaust

-fmic

and is it able to be done for under $2,500?

[DezertEagle]

A 'proper' exhaust will cost you a little over $1000

FMIC Ballpark $1000

Power FC with Tuning around $2000

[Roy]

With a good exhaust, filter and intercooler you will be running around 11-12psi. You wont make anything near 200rwks though. 150-160 seems closer to the mark, but thats just a dyno reading.

Id suggest a dyno run or two with your current setup ($50-80) to be sure the fuel pump and everything else is ok.

[Kaido_RR]

FMIC Hybird $450

Piping $300

PFC + Hc $1100

Exhuast: Jap Spec from cat (e.g HKS, apexi) $500-$600

Custum Dump/Front: $300

Fuel Pump 500hp: $300

tuneing: $200-300

[riceline]

Intercooler piping for $300??

$300 for a Power Fc Tune???

[Kaido_RR]

riceline, if u install the pfc urself, and same with the piping it can become cheaper

[Sydneykid]

Personal experience, 200 rwkw out of the standard RB20DET turbo is possible, but reliability goes out the window. A standard RB25DET turbo with the RB20DET wastegate actuator does the job OK, but even then you are close to ceramic in the cat disease.

So personally I would add turbo to the list.

[Doctor 30]

200rwkw? What duty cycle at what RPM is this figure acheived at?

[Sydneykid]

200rwkw?  What duty cycle at what RPM is this figure acheived at?

Around 85%, so very marginal. That's using a GTR fuel pump and an adj fuel pressure regulator with above standard rail pressure. So I guess he really needs to add those to his list.

The 200 rwkw was around 6,750 rpm, we are at 225 rwkw now at 7,100 rpm so it sounds about right.

[japsky33]

Hey guys,

Sydneykid is correct you can stretch the standard injectors to around the 225rwkw. To reach 200Rwkw with the RB20 a different turbo will be needed definitely pump/regulator and PowerFC,Front mount and exhaust. In Zoom with the "brains project" they got 220rwkw with HKS turbo,standard computer remapped (By Martin Donnon) upgraded pump,regulator,fmic and i think 14psi they also relocated the throttle body to the front of the plenum

So its going to cost you alot more then 2.5K I would suggest going the whole hog RB20's can take it and they love it.. GT30,Ex Gate,PwrFC,Injectors,Pump,FMIC,after market plenum and throttlebody. at least then you wont be at 200rwkw for 6 months and be looking at more mods and having to do these things anyway and finding your turbo's to small or your computer isnt good enough.

My 2 cents.

BR,

JH

Around 85%, so very marginal.  That's using a GTR fuel pump and an adj fuel pressure regulator with above standard rail pressure.  So I guess he really needs to add those to his list.

The 200 rwkw was around 6,750 rpm, we are at 225 rwkw now at 7,100 rpm so it sounds about right.

[japsky33]

P.S There was one with GT30 etc at Jamboree last week standard motor making 410HP at the treads revving to 8700rpm!! OH YEAH sounded great to.

BR,

JH

Hey guys,

Sydneykid is correct you can stretch the standard injectors to around the 225rwkw. To reach 200Rwkw with the RB20 a different turbo will be needed definitely pump/regulator and PowerFC,Front mount and exhaust. In Zoom with the "brains project" they got 220rwkw with HKS turbo,standard computer remapped (By Martin Donnon) upgraded pump,regulator,fmic and i think 14psi they also relocated the throttle body to the front of the plenum

So its going to cost you alot more then 2.5K I would suggest going the whole hog RB20's can take it and they love it.. GT30,Ex Gate,PwrFC,Injectors,Pump,FMIC,after market plenum and throttlebody. at least then you wont be at 200rwkw for 6 months and be looking at more mods and having to do these things anyway and finding your turbo's to small or your computer isnt good enough.

My 2 cents.

BR,

JH

[kane]

thanks for the replies guys. ive been speaking to dezerteagle and hes reccomends a R33 GTST with:

- FMIC

- 3inch Zorst

- Power FC

and ill be getting close to 200rwkw?

[wilch]

Yep you should... depends on how healthy the engine is too.

With my r33 series 2 with FMIC, 3"dump/front, 3" exhaust (stock cat), ebc @ 11psi, and stock ecu I made 184.2rwkw.

Running very rich, with the computer doing the normal retard the timing bit.

wil..

[Doctor 30]

so whats a high pressure/flow cheap fuel pump (external)

[Guest Robo's]

Last dyno i was pushing 207rwkw, so look at my mods.

[DezertEagle]

thanks for the replies guys. ive been speaking to dezerteagle and hes reccomends a R33 GTST with:

- FMIC

- 3inch Zorst

- Power FC

and ill be getting close to 200rwkw?

Another thing I found is RB25DET's can be a lucky dip. My first motor with just Front Mount, Cat Back and Upped boost (around 10psi) pinged at anything over 4000rpm, and ALOT of pinging.

When you get the motor and ready to modify it be sure to run a good diagnostic check over it. Go to someone like Unique Autosports to do a major check and service first.

[DezertEagle]

Last dyno i was pushing 207rwkw, so look at my mods.

I have at the moment

- 3" Turbo Back

- FMIC

- Pod Filter

Will simply adding in an Exhaust Cam Gear add anymore power with standard ECU? Is it worth doing?

[Beer Baron]

Yep you should... depends on how healthy the engine is too.

With my r33 series 2 with FMIC, 3"dump/front, 3" exhaust (stock cat), ebc @ 11psi, and stock ecu I made 184.2rwkw.

Running very rich, with the computer doing the normal retard the timing bit.

wil..

Yeah, but he has an RB20, you have RB25 different motors mate. I don't think that with the same mods you have he will make the same (or better) power.

Richard