R33 Reverse EL Dials

[TMPTED]

Hey buddy, if you read through the posts regarding this thread, look at one of the post made by myself... It gives a link for installation. Im installing mine myself, and for the power, im pretty sure its simple, just run the black negative wire to any metal on the car... With the positive, just connect it to your red wire on the cigarette lighter... Hope that helps...

dont plug it to the cigarette lighter, otherwise it'll light up all the time... you have to hook it up to a power line that goes on when you switch your lights on so it only lights up at night. if u have a boost gauge that lights up at night, use that wire.

[Mud]

I think he means the part around the lighter that "lights up" when your head lights are on.

[DVS33T]

Thanks fellas. I think i should be able to do it... Anyway daryl, are they sent yet mate?

[Mud]

Ok , who's picked them up and already fitted them?

Lets see some pics !!!

[dazsQ]

Vape came to get his set last night, I think hes puttin em in today, not quite sure. I'm writing in the address's on parcels as we speak, if Australia post do their job you guys should get them tomorrow!!

[Mud]

Bewdy,

will knock off early and put em in tomorrow night!!!

[dazsQ]

Just got back from the post office, All sent! Look out in the mail tomorrow guys

Just letting you guys know there is a 3 month warrantee on the dials, but the warrantee will be void if they are incorrectly installed or damaged. So be careful when you guys are installing them

Thanks guys Daryl

[Mud]

your a champ!

[Mr_G]

Just got back from the post office, All sent!  Look out in the mail tomorrow guys

Just letting you guys know there is a 3 month warrantee on the dials, but the warrantee will be void if they are incorrectly installed or damaged.  So be careful when you guys are installing them

Thanks guys Daryl

THANKS DARYL!!!!! Ill post some pics once mine are installed... Oh, do they have instructions??? I know I posted up instructions before but just wondering if they came with some???

Cheers

Jason

[dazsQ]

THANKS DARYL!!!!! Ill post some pics once mine are installed... Oh, do they have instructions??? I know I posted up instructions before but just wondering if they came with some???

Cheers

Jason

Sorry guys theres no instructions with em, can't help ya out there, I did my dials myself and the ones you posted are pretty accurate and helpful, should be alrite. Again careful with the install, don't damage the dials else the warrrantee will be void

Thanks guys Daryl

[DVS33T]

Daryl, since you've installed yours already... What did u hook it up to? Do you just just slide these over the factory dials except for the boost gauge? Sorry for the quetions mate, just wana make sure.

[dazsQ]

mine werent exactly r33 dials, I drive a 180sx, so I dind't have a boost gauge dial, I hooked mine up to the cigarette lighter, bcoz at the time I didn' tknow where to hook it up at the back, after looking at that installation guide posted earlier I think I'll fix it up

Heres the one Mr_G posted earlier:

http://www.autoshop.com.au/forumtopic.php?...?id=38&ref=ebay

and the one pushead made:

http://users.tpg.com.au/adsldg7j/Console/console.htm

[BLakniTE]

For anyone that misses out on this group-buy contact me if you want to get one. Also, I can get the white dials for 180SX and a few other models for same price.

Also for melbourne buyers that want installation, I have a friend that will do very cheap.

thanks

[Anquetil]

Got mine this morning!

Thanks.

[Mud]

Me too!

are we gonna get together to put these in Shane?

The holes look WAAAAYYYY to small to fit over the ends of the needles?

Are the needles gonna have to come off?

[Anquetil]

Hey Mark, you'd know how to get the dash off pretty easy wouldn't you, having re-sprayed your dash?

You wanna do it sometime during next week after work?

Me too!

are we gonna get together to put these in Shane?

The holes look WAAAAYYYY to small to fit over the ends of the needles?

Are the needles gonna have to come off?

[Mud]

yeah the dash is a peice of piss.

I'm worried about pulling the needles off, I REEALLY don't think they'll slide on over them

[JiVE]

Just got my gauges delivered to me now....

awesome stuff. I had to see what they looked like right away so I just hooked em up to a 12 volt transformer and they look fantastic. And a neat little control pad that lights up to controls the brightness or the differn't shades of green or blue can be adjusted via this. Great group buy Daryl

[DVS33T]

Recieved mine this morning. It does fit..

[DVS33T]

The only problem now is i dont know how to connect the power supply ! argg....