What should I do with my car down the track?

[riceline]

Go the RB30

Awsome engine with power all over the place - on boost at 1600rpm.

[666DAN]

Hey riceline...who built your engine?

[Fro-Daddy]

GT Four! either stagea swap or RB30. if you RB30'd it would you use the NA gbox from it or would a stagea one fit?

sell your car NA n then we can stick the turbo on my car! haha jk, rory wants a turbo for his AW11 though...

[Guest neoGT-25]

stagea swap i think

[CYA_34]

Depends what you want to do ,Drag it, Drift it, Circut Race.:confused:

The 2 wheel Gt+t is good for the RB26 swap less weight without the 4wd system and damn cheaper than the GTR.

If you've seen in Japan there's a few GTT's running GTR engines even better if you can land the VVT version of the RB26.:jump:

CYA

[Oz]

Hey Dan Go with the RB30 build & be a little different & go with the RB26 top end with a large single turbo on it

I was looking into it & had got an idea of price of around 6K with out turbo & computer just for the motor build & head/manifolds with no turbos.

I have a lot of info on it if ur keen let me know, mind you that build was with head port work & a 30 thou over on the block with pistons & rods with a fully balanced bottem end I got told it should be good for around 350 at the wheels with the right set up injectors & cooler, only prob with the big single & head port work is it will be very lagie but once it on hold on I don't have the money to do what I wanted to do now but looking into KAPA with super charger kits

[666DAN]

I'm just interested in a damn quick street car...it may make the drags now and again, not interested in track at all.

Oz sounds like the man to talk to!

[predator]

there was a rb25 complete for $2000 on here in QLD.. still available last i checked.. loom, ecu, afm, everything..

would be a non-neo r33 engine.. but at that price worth considering

otherwise you get Rb30 blocks for a couple of hundie, and rb25 heads for around $1000.. throw in some cams .. the rebuild costs you a few thousand but that is with the serious bits. Near $10k you can have 350-400rwkw engine if you like.. add a nice turbo and start blowing up drivetrains.

rb26 head is a little too expensive.. flows better and tougher but $1000-$2000 more.

[riceline]

Hey Dan

Originaly myself and a mate built it but had a few problems so I took it to Power Break and Enginering (near Harrys Diner)

They pulled out my original build - rebuilt/ balanced the whole botom end - rebuilt mild port of the head - put it all back together - put it in the car and got it working for $2500

the engine is completly balanced - bored 10 though and runs awsome!

Just waiting to put on my fmic and power fc now and Ill be almost all done with the 33

[V8skylineMAN]

rb30 with a rb26 head and single turbo is hardly "a little different"......

Go the 4.5 or 4.1 nissan V8 and put twin turbs on.... even with a stock engine this combo would haul some serious A55! the 4.1 will obviously be a little more rev happy, but the 4.5 will have more off-boost torque....

V8 skylines r.o.c.k! (but im biased)

[666DAN]

Thanks riceline, may have a yarn to the guys down there then....something *cheaper* like the RB30DET may keep me happy for a bit before I move onto another car

Also what turbo are you using on that...is it still the stock one?

[riceline]

Hey Dan.

Yes I am using the stock turbo. I will pm you some details.

[666DAN]

Well it's not looking too bad so far...the only thing I need is the RB30 bottom end to get made up Hopefully this'll be on the cards for around January!!!