Jump to content
SAU Community

Recommended Posts

just a quick question which you guys should be able to answer.

I've been watching a lot of Initial D lately and I've been noticing that when say Itsuki or Takumi speak to Kenji or Iketani (who are older) they call them "sempai" - what does "sempai" mean?

Also when they talk to chicks they put some that sounds like "chan" at the end (eg. Natsuki-chan or Saori-chan etc...) why? oh and Mogi calls Takumi "Takumi-ku" what does the "ku" bit mean?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/52362-japanese-naming-rank-system/
Share on other sites

ok heres just what i know, im pretty sure someone can explain it better.

(used instead of san, ie yukio-san)

senpai = someone that they look up to, like iketani is pretty much the older one so they use senpai

chan = is usually what they use for kids, for girls it makes it sound cuter, like crayon shin chan

kun = is what they use usually for teenage guys, ie takumi-kun

but really it all depends on which ever is cuter...that is for "CHAN" which can be used for guys also.

KUN is not used for just teenage guys but rather for those who are younger then you.

In the office they all call me Troy-kun where as my colleague they call him Glen-chan.

Girls almost always use "chan" to other girls if they know each other, but change that to "san" (after their family name) if they don't know the other.

I'd say if someone used "chan" after a guys name, its almost always for a toddler/young boy... if it's used for an older mature guy it must either be as an office joke, insult, or he's gay and is down with the whole feminine thing... (but I agree with Troy, "Glen-chan" rolls much better than "Glen-kun" so that'd be an exeption)

I'm gonna disagree slightly - '-chan' is attached to just about anyone by teenage girls (or those who act like teenagers), usually combined with the 'cutsie' tone. The same girls are just as likely to use 'ore' or 'boku' as they are 'atashi'.

sempai is something that is used in many aspects of society (arts, sports, work, etc), but first encountered and perpetuated at school-level - most often in school clubs - the sempai will be the older student who shows the younger students 'the ropes', tutors them, bosses them around, and so on

troy summed up 'kun' very well

-ku I haven't heard myself

Reading through this thread and I just thought, in all the years I've been here I can never, ever recall being called "deibito chan"...

I should clarify I prefer to go by my full name David, when in Japan, mainly because when Japanese kids say Dave (debu) they think it's funny....now anyone who has ever met me can attest, I'm anything but "debu" :P:) :)

Could be worse though, I work with a guy at one place, his name is Keith and the kids all call him "kiss Sensei" ! :)

Following on from that (and still on topic I hope :P) - for the Japan residents, when in Japan how do other people - students, colleagues etc address you? Do they pronounce your name properly - or just say it katakana style? I hardly ever meet people that actually say "David"...it's always "deibito". Even the teachers and everyone I work with calls me "deibito"....so after a while you get to the point, well I have at least, where people ask my name and I just reply "deibito"... :)

bugs me a bit though...many of them are keen to learn spoken English, with an emphasis on correct pronunciation and they can't even be bothered to get my name right! :)

They don't say "Debido", Dave? They say "Debito"? The "to" and "do" I thought would be easy, but I guess anythings possible!

I for one can never recall being called "Jasutin chan" either... and whenever there were teenage girls around, they had at least a little respect for the guys by not calling them "... chan" unless it was a joke or not being serious...? Even to Japanese guys...

Anyways... I get called "Ji-ya-s-tin"... hahaha pretty boring!

Troy: I'm majorly hungover... cheers for footing the taxi fare :P

Nah...it's "deibito"...

I think my ignorance when I first got here is partly to blame - you know how it is, you start filling in forms, registering at places and if you don't have your name written down correctly, in Katakana, from the start, then it becomes really difficult to change it later...

funnily enough, about 3 months after I got here, studying katakana, I discovered that it's possible to write "David" almost exactly using katakana - " デヴィド " The "v" katakana doesn't appear to be very popular...I mean, Vodafone prefer to write it as "ボーダフォン" rather than "ヴォダフォン" :confused:

my work mates and I have a unique ranking system for women....its like the the cars at the auction's.....Golden corner(first owner,never been crashed) before damaged and now repaired section(had more hits than the beetles,however a clean unit can be obtained)Damaged unrepaired(a mess,but spend some time playing with it and massaging it on the CAR-O-LINER and it can become come your pride and joy)No paper....for parts(Unregisterable,a complete mess,very ugly) ..it may be something like that ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheapest option, find a NEO head. Put in good springs, decent cams, and send it to the moon. I rev mine to 8600RPM, gets me about 232km/h down the main straight at SMSP bouncing off the limiter in 4th. I've never dared to grab 5th 🥲
    • Gday mate, Personally in my car i run 450kw in an s2 rb25 so also hydraulic lifters and have always run it to 7500 RPM and using some baby 256 poncams with new but stock springs and retainers. While i cant speak on any experience with solid lifters i personally have had no issues with my hydraulic lifters which were just cleaned and set in an oil bath before assembly over 7 years ago. Over 8k RPM is cool IMO and if you are using the stock gearbox or just a box with longer ratios the higher rpm certainly could aid to maintain boost into the next gear as that was always something i struggled with as i have a 3582r also but a hypergear equivalent could aid that issue. In summary i would make a choice on the cam you want to use first then decide which springs and retainers work best with it and then you can toss up if you really need the solid lifters, if the car is mainly street i would learn towards keeping the hydraulic lifters as when installed properly and nothing too hektik going on around them they do the trick.  
    • Yucky. Things haven't gotten any better though. Now you have Emerson and Honeywell pushing these massive DCS/Scada things with proprietary hardware. They're not a PLC, they're not a computer, they're a...distibuted PLCish/DCSish monster of thing, that only they can program because they make the barriers to entry for anyone else so fricking high. And their developers are all located in the third/developing world (and India, in case anyone does not include that place in that category) and there are terrible failings of the ESl variety, of the care and common sense variety, and f**king forget about Functional Safety. Not a one of them has any idea what it means to comply with an IEC 615xx series standard.
    • All of the ECU grounds are to the chassis, the IGN grounds are to the cylinder head and i believe all the OEM body harness are left in original locations, im trying to work out if i can tell if the sensor voltage itself is losing any power to it from the very low ECU voltage. But yeah a manual pressure gauge will help in picking which path to actually chase. Also please dont bully my wiring plan i never designed it to be universally understood hopefully it still can make sense to you, im a wiring virgin.  1 thing i have just noticed the pressure sensor in question relays both pressure and temperature, the temperature reading holds nice and steady despite the low ecu voltage but the pressure reading is the one that jumps around alot so maybe it is really a pressure issue? wiring plan.xlsx
×
×
  • Create New...